journal article·2000-06

Synthesis and properties of ceramics in the SiC — B4C — MeB2 system

O. N. Grigor’ev, G. A. Gogotsi, Yu. G. Gogotsi, V. I. Subbotin, N. P. Brodnikovskii

Powder Metallurgy and Metal Ceramics· Volume 39· Issue 5-6
Publisher page

Abstract

The effect of impurities and additives of titanium and zirconium borides on the structure and mechanical properties of SiC — B4C ceramics over a broad temperature range has been investigated. The ceramics was fabricated by hot pressing without a protective medium. Introduction of borides is accompanied by improvement in all the studied mechanical properties at room temperature, and the nature of hardening of the ceramics is practically independent of the type of SiC powders used. At high temperatures, the mechanical behavior of the ceramics is determined by the impurity composition: the ceramics obtained using abrasive powders loses strength beginning at 600°C, while using powders with decreased impurity content makes it possible to preserve the strength of the material up to a temperature of 1400°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. S. S. Ordan’yan, A. I. Dmitriev, E. K. Stepanenko, et al., “The SiC — TiB2 system is the basis for ultrahard wear-resistant materials,”Poroshk. Metall., No. 5, 32–34 (1987).
2. S. S. Ordan’yan, A. I. Dmitriev, and I. M. Kapitonova, “Reaction of SiC with ZrB2,”Izv. Akad. Nauk SSSR, Neorg. Mater.,25, No. 10, 1752–1755 (1989).
3. S. S. Ordan’yan, A. I. Dmitriev, and S. S. Moroshkina, “Reaction of SiC with CrB2,”Izv. Akad. Nauk SSSR, Neorg. Mater.,27, No. 1, 157–159 (1991).
4. Yu. P. Udalov, E. E. Valova, and S. S. Ordan’yan, “Synthesis and abrasive properties of eutectic compositions in the B4C-SiC-TiB2 system,”Ogneupory, No. 10 (1995).10.1007/BF02227391 ↗
5. S. S. Ordan’yan, A. I. Dmitriev, and E. K. Stepanenko, “Reaction mechanisms in the system B4C - SiC - TiB2,” in:Science and Technology of Silicon Materials under Modern Market Economic Conditions. Economics: Abstracts (Moscow, June 6–9, 1995) [in Russian], Moscow (1995), p. 131.
6. M. A. Janney, “Mechanical properties and oxidation behavior of a hot-pressed SiC — 15 vol. % TiB2 composite,”Amer. Ceram. Soc. Bull.,66, 322–324 (1987).
7. C. H. McMurty, W. Boeker, and S. G. Seshadri, “Microstructure and material properties of silicon carbide — titanium boride particulate composites,”Amer. Ceram. Soc. Bull.,66(2), 325–329 (1987).
8. T. Toshihiko and W. Shigetaka, “Properties of hot-pressed SiC matrix composites with internally synthesized TiB2,”J. Ceram. Soc. Jpn., Int. Ed.,97, 1188–1191 (1989).
9. O. Yutaka, M. J. Hoffman, and G. Petzow, “Sintering ofin-situ synthesized SiC - TiB2 composites with improved fracture toughness,”J. Amer. Ceram. Soc.,75, 2479–2483 (1992).10.1111/j.1151-2916.1992.tb05600.x ↗
10. V. V. Koval’chuk, A. I. Yuga, and O. N. Grigor’ev, “Physicomechanical and tribological properties of SiC - MeB2 materials,”Poroshk. Metall., No. 2, 95–99 (1992).
11. O. N. Grigor’ev, V. V. Koval’chuk, and V. I. Subbotin, “Structure and properties of SiC — MeB2 ceramics,” in:Electron Microscopy and Strength of Materials [in Russian], Kiev (1998), No. 9, pp. 112–129.
12. Ichitaro Ogawa and Takayoshi Yamamoto, “Effects of additions of ZrC and ZrB2 on oxidation resistance of C/SiC/B4C composites,”J. Mater. Sci. Lett.,11, 296–298 (1992).10.1007/BF00729419 ↗
13. K. Niihara, R. Morena, and D. H. Hasselman, “Evaluation ofK 1c of brittle solids by the indentation method with low crack-to-indent ratios,”J. Mater. Sci. Lett.,1, No. 1, 13–16 (1982).10.1007/BF00724706 ↗
14. J. Kuebler, “Fracture toughness of ceramics using the SENVB method,” in:Ninth International Conference on Modern Materials and Technologies: World Ceramics Congress and Forum on New Materials, Italy (1998).
15. O. N. Grigor’ev, G. S. Krivoshei, and L. P. Khoroshun, “Internal stresses in composites based on Si3N4,”Zavod. Lab.,10, 37–39 (1992).