Structural and phase transformations and rate of Ti2Co and TiCo interaction with hydrogen and synthesis of nondestructive nanostructured titanium hydride composites
Source abstract
Abstract
The paper examines the sequence of structural and phase transformations and the rate of Ti2Co and TiCo interaction with hydrogen. Destructive hydrogenation of Ti2Co is used to produce nondestructive nanostructured titanium hydride composites. Thermodynamic analysis has shown that Ti2Co and TiCo destructive hydrogenation is thermodynamically favored in the temperature range 298–973 K. In the temperature range 773–973 K, Ti2Co interacts with hydrogen by destructive hydrogenation reaction, in which hydrogen is dissolved in the intermetallic compound, titanium is selectively hydrogenated to cubic TiH1.9, and titanium-depleted TiCo and TiCo2 intermetallics are successively formed in accordance with the Ti–Co phase diagram. The rate of Ti2Co destructive hydrogenation is proportional to temperature, hydrogen pressure, and surface area of the starting samples. Compound TiCo is hydrogenated to form a solution of hydrogen in Ti1+yCo, intermetallic TiCo2, and a solution of hydrogen in β-titanium. Nondestructive composites with nanostructured components are synthesized by Ti2Co destructive hydrogenation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Advanced materials and composites · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. J. L. Murray, Binary Alloy Phase Diagrams, 2nd ed., Vol. 2, ASM International, Materials Park, Ohio, USA (1990), p. 1494.
2. V. V. Pet’kov and M. V. Kireev, “Intermediate phases in the titanium–cobalt system,” Metallofizika, Issue No. 33, 107–115 (1971).
3. J. Y. Brun, S. J. Hamar-Thibault, and C. H. Allibert, “Cu–Ti and Cu–Ti–Al solid state phase equilibria in the Cu-rich region,” Z. Metallkd., 74, No. 8, 525–529 (1983).
4. T. Takayama, J. Wey Myeong, and T. Nishizawa, “Effect of magnetic transition on the solubility of alloying elements in BCC iron and FCC cobalt,” J. Jpn. Inst. Met., 45, No. 4, 341–346 (1981).10.2320/jinstmet1952.45.4_341 ↗
5. H. Hofmann, G. Frommeyer, and C. Derder, “Creep mechanisms in particle strengthened α-titanium–Ti2Co alloys,” Mater. Sci. Eng: A, 245, Issue 1, 127–134 (1998).10.1016/S0921-5093(97)00714-4 ↗
6. P. J. M. Van der Straten, G. F. Bastin, F. J. J. van Loo, et al., “Phase equilibria and interdiffusion in the cobalt–titanium system,” Z. Metallkd., 67, No. 3, 152–157 (1976).
7. G. Sauthoff, Intermetallics, Wiley-VCH, New York (1995), p. 165.10.1002/9783527615414 ↗
8. H. G. Hakobyan, S. K. Dolukhanyan, N. G. Tamamyan, et al., “The synthesis of hydrides of intermetallic Ti2Co under an accelerated electron beam,” J. Alloys Compd., 330–332, 564–568 (2002).10.1016/S0925-8388(01)01450-5 ↗
9. A.V. Skripov, A. L. Buzlukov, A.V. Soloninin, et al., “Hydrogen motion and site occupation in Ti2CoH x (D x ): NMR and neutron scattering studies,” Physica B, 392, 353–360 (2007).10.1016/j.physb.2006.12.002 ↗
10. A. L. Buzlukov, A. V. Soloninin, and A. V. Skripov, “NMR evidence of two frequency scales of hydrogen jump motion in Ti2Ni-type compounds Ti2CoH x ,” Solid State Commun., 129, 315–318 (2004).10.1016/j.ssc.2003.10.016 ↗
11. A. L. Buzlukov, A. V. Skripov, A. V. Soloninin, et al., “Hydrogen in Ti2Ni-type intermetallic compounds: a proton NMR study,” J. Alloys Compd., 352, 66–72 (2003).10.1016/S0925-8388(02)01175-1 ↗
12. B. A. Kolachev, R. E. Shalin, and A. A. Il'in, Hydrogen Storage Alloys [in Russian], Metallurgiya, Moscow (1995), p. 384.
13. V. P. Glushko (ed.). Thermal Constants of Substances [in Russian], Issue VII, Part 1, VINITI, Moscow (1972), p. 370.
14. V. P. Glushko (ed.). Thermal Constants of Substances [in Russian], Issue VI, Part 1, VINITI, Moscow (1974), p. 344.