journal article·2012-03

Numerical simulation of the hot forging of porous preforms in a die with an internal flash gutter

G. A. Baglyuk, O. V. Mikhailov

Powder Metallurgy and Metal Ceramics· Volume 50· Issue 11-12
Publisher page

Abstract

The hot forging of porous preforms with an axial hole in a semiclosed die with an internal flash gutter is numerically simulated. The distribution of deformation and density over the cross-section of the preform is substantially different at separate stages of the process. The maximum axial and radial strains are observed near the flash gutter. Enlarging the compensation slot over the optimum size causes residual porosity in some areas of the forging.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Yu. G. Dorofeev, Dynamic Hot Pressing of Porous Powder Blanks [in Russian], Metallurgiya, Moscow (1977).
2. Yu. G. Dorofeev, B. G. Gasanov, V. Yu. Dorofeev, et al., Industrial Technology for Hot Pressing of Powder Products [in Russian], Metallurgiya, Moscow (1990).
3. V. A. Pavlov and M. I. Nosenko, “An investigation of the processes of hot deformation of porous blanks of titanium, copper, and aluminum and optimization of them,” Powder Metall. Met. Ceram., 32, No. 9–10, 768–772 (1993).
4. G. A. Baglyuk, “Modeling deformation of a porous blank in open-die forging,” Powder Metall. Met. Ceram., 36, No. 9–10, 459–461 (1997).10.1007/BF02680491 ↗
5. G. A. Baglyuk, “Consolidation of a porous material in hot pressing in a closed mold fitted with a compensator,” Powder Metall. Met. Ceram., 37, No. 5–6, 249–252 (1998).10.1007/BF02675856 ↗
6. G. Baglyuk, “Densification and shape change of porous billets in closed and open dies,” in: Recent Developments in Computer Modeling of Powder Metallurgy Processes, IOS Press, NATO Sci. Ser. (2001), pp. 163–168.
7. G. G. Serdyuk, “Plastic strain of powder components in unclosed volumes,” Powder Metall. Met. Ceram., 34, No. 5–6, 247–252 (1995).10.1007/BF00560124 ↗
8. E. A. Doroshkevich, V. M. Gorokhov, I. N. Ryabov, and E. V. Zvonarev, “Finding an optimum shape of a porous blank in hot forging,” Powder Metall. Met. Ceram., 27, No. 4, 269–272 (1988).10.1007/BF00794444 ↗
9. G. A. Baglyuk, “Optimization of the forming processes in hot forging of porous preforms,” Naukovi Notatki, 25, No. 2, 4–8 (2009).
10. L. I. Zhivov A. V. Sypko, and N. I. Dolgii, “Experience of forming of titanium powder products,” Kuzn.-Shtamp. Pr-vo., No. 3, 47 (1975).
11. G. A. Baglyuk, I. D. Radomysel’skii, M. B. Shtern, and V. V. Mizyuk, “Densification and change in the shape of a hollow porous cylinder during hot compression in a container,” Powder Metall. Met. Ceram., 25, No. 3, 179–181 (1986).10.1007/BF00794961 ↗
12. A. A. Bondarev, K. A. Vartanov, and Yu. P. Sobolev, “Distribution of density in the bulk forging of axisymmetric parts from metal powders,” Powder Metall. Met. Ceram., 24, No. 1, 20–23 (1985).10.1007/BF00792202 ↗
13. G. A. Baglyuk, “Modeling the process of upsetting a porous ring in a die with contact friction taken into account,” Powder Metall. Met. Ceram., 33, No. 1–2, 14–17 (1995).10.1007/BF00559700 ↗
14. S. Shima and M. Oyane, “Plasticity theory for porous metals,” Int. J. Mech. Sci., 18, 285–291 (1976).10.1016/0020-7403(76)90030-8 ↗
15. A. R. Khoei, Computational Plasticity in Powder Forming Processes, Elsevier (2005).
16. Sh. Kobayashi, S.-I. On, and T. Altan, Metal Forming and the Finite-Element Method, Oxford Univ. Press, New York (1989).10.1093/oso/9780195044027.001.0001 ↗
17. G. A. Baglyuk, “Increasing the efficiency of the compaction of porous preforms by intensifying shear deformation,” in: Rheology, Structure, and Properties of Powder and Composite Materials [in Ukrainian], Lutsk. Derzh. Tekhn. Univ., Lutsk (2004), pp. 35–48.