journal article·2020-03

Mixing Enthalpies of Sr–Sb Melts

M.I. Ivanov, L.O. Romanova, M.O. Shevchenko, V.S. Sudavtsova, V.G. Kudin

Powder Metallurgy and Metal Ceramics· Volume 58· Issue 11-12
Publisher page

Abstract

The mixing enthalpies of Sr-Sb melts were measured by isoperibolic calorimetry at 1230 K over the entire composition range referred to the liquid components. Large exothermic mixing effects were found ( increment H-min = -70.1 +/- 4.8 kJ/mole). They were indicative of very strong interaction between the components and agreed with the Sr-Sb phase diagram. A series of intermetallic compounds, SrSb, SrSb3, Sr3Sb2, and Sr2Sb, was found in the system. Minimum increment H for the liquid alloys corresponds to the composition range where SrSb and Sr3Sb2 phases exist. The mixing enthalpies were found to be less exothermic than those for the intermetallic phases. This finding agrees with data for the alloys in systems with strong interaction between the components and is indicative of short-range ordering in liquid state. The mixing enthalpies for Mg (Ca, Sr)-Sb melts decrease in the Mg-Sb -> Ca-Sb -> Sr-Sb series, which agrees with increasing differences in the electronegativity of the components.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermodynamic and Structural Properties of Metals and Alloys · Advanced Thermoelectric Materials and Devices · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. K. Guo, O. Cao, and J. Zhao, “Zintl phase compounds AM2Sb2 (A = Ca, Sr, Ba, Eu, Yb; M = Zn, Cd) and their substitution variant a class of potential thermoelectric materials,” J. Rare Earths, 31, No. 11, 1029–1038 (2013).10.1016/S1002-0721(12)60398-6 ↗
2. R. Hultgren, P.D. Desai, T.D. Hawkins, M. Gleiser, K.K. Kelley, and D.D. Wagman, Selected Values of the Thermodynamic Properties of the Elements, ASM International, Metals Park, OH (1973).
3. R. Xu and W. van der Lugt, “Resistivity of liquid Sr–Bi and Sr–Sb alloys,” J. Non-Cryst. Solids, 153–158, No. 2, 740–743 (1993).10.1016/0022-3093(93)90059-7 ↗
4. P.P. Lyakishev (ed.), Phase Diagrams of Binary Metallic Systems: Handbook [in Russian], Mashinostroenie, Moscow (1996), p. 992.
5. N.I. Usenko, M.I. Ivanov, V.M. Petiuh, and V.T. Witusiewicz, “Thermochemistry of binary liquid alloys of cooper with barium and lanthanide metals (Eu, Dy and Yb),” J. Alloys Compd., 190, No. 1, 149–155 (1993).10.1016/0925-8388(93)90391-Y ↗
6. A.N. Nesmeyanov, Vapor Pressure of Chemical Elements [in Russian], Izd. Akad. Nauk SSSR, Moscow (1961), p. 396.
7. V.A. Kireev, Methods of Practical Calculations in the Thermodynamics of Chemical Reactions [in Russian], Khimiya, Moscow (1975), p. 535.
8. M.I. Ivanov and V. T. Witusiewicz, “Thermochemistry of binary liquid alloys of silver with rare earth metals,” J. Less-Common Met., 186, No. 2, 255–266 (1992).
9. M.C. Day and Joel Selbin, Theoretical Inorganic Chemistry, Reinhold Book Corporation, New York (1969).
10. O.I. Ostrovskii, V.A. Grigorian, and A.F. Vishkarev, Properties of Metallic Melts [in Russian], Metallurgiya, Moscow (1988), p. 304.
11. Manas Paliwal and In-Ho Jung, “Thermodynamic modeling of the Mg–Bi and Mg–Sb binary systems and short-range-ordering behavior of the liquid solutions,” CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 33, 744–754 (2009).10.1016/j.calphad.2009.10.002 ↗
12. Song Qin, Shuhong Liu, Cong Zhang, Jinghua Xin, Yao Wang, and Yong Du, “Thermodynamic modeling of the Ca–In and Ca–Sb systems supported with first-principles calculations,” CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 48, 35–42 (2015).10.1016/j.calphad.2014.10.008 ↗
13. A. Bouhajib, A. Nadiri, A. Yacoubi, and R. Castanet, “Investigation of the short-range order in the Ca–Sb melts,” J. Alloys Compd., 287, No. 1–2, 167–169 (1999).10.1016/S0925-8388(99)00066-3 ↗