journal article·2007-03

Technical study for fabrication of new cermet used as inert anode in aluminum molten-salt electrolysis

Li Yuchun, Zhou Tao, Li Zhiyo, Tian Zhongliang, Qin Qinwei

Powder Metallurgy and Metal Ceramics· Volume 46· Issue 3-4
Publisher page

Abstract

In aluminum electrolysis industry, traditional carbon electrodes have many disadvantages under molten-salt corrosive conditions (970°C), such as large quantities of CO2 production and quick consumption of carbon. The best way is cermet, which is a kind of graded composite material and consists of spinel NiFe2O4 as a ceramic phase and Ni-Fe-X alloy as a metal phase. The fabrication of NiFe2O4 powder is studied by chemical co-precipitation method with different co-precipitation chemicals (NH3· H2O, NaOH); differential thermal analysis and thermal gravity (TG) test have also been carried out to evaluate the performance of fabricated powder. The fabrication of Ni-Fe-X alloy is studied with three different kinds of powder compositions (NiFeAlCuZn, NiFeAlCuSn, and NiFe), different forming methods and sinter conditions are also compared and discussed in detail. DTA, XRD, density, hardness and anti-oxidation tests are carried out to test the performance of fabricated materials. Finally, fabrication technical condition of cermet is studied and determined according to graded composite slurry casting method, which combines the ceramic phase and metal phase with good performance. The fabrication technique presented in this study is valuable for making new anti-corrosion electrode material used in aluminum electrolysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bauxite Residue and Utilization · Molten salt chemistry and electrochemical processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Liu Yexiang, Function Electrode Material and Its Application, Publishing House of Central South University of Technology, Changsha (1996), pp. 137–165.
2. Liu Yexiang, “International aluminum situation in century alternation period and development hotspot,” Transactions of Nonferrous Metals Society of China, No. 11 (2001).
3. J. C. Benedyk, “Status report on inert anode technology for primary aluminum,” Light Metal Age, No. 2, 36–37 (2001).
4. S. P. Ray, “Inert anode containing metal oxides, copper and noble metal,” Patent 6,126,799, USA, Published October 3 (2000).
5. R. P. Pawlek, “Recent developments of inert anodes for the primary aluminum industry,” Aluminum, 71, No. 3, 340–342 (1995).
6. S. P. Ray and Xinghua Liu, “Inert anode containing base Metal and noble metal useful for the electrolytic production of aluminum,” Patent 6,162,334, USA, Published December 19 (2000).
7. L. Edwards and K. Halvor, “Inert anodes and other technology changes in the aluminum industry: The benefits, challenges, and impact on present technology,” JOM, No. 5, 28–33 (2001).
8. T. R. Beck, “A non-consumable metal anode for production of aluminum with low-temperature for fluoride melts,” Light Metals, 355–360 (1995).
9. R. P. Pawlek, “Recent developments of inert anodes for the primary aluminum industry. Part I,” Aluminum, 71, No. 2, 202–206 (1995).
10. J. N. Hryn and M. J. Pellin, “A dynamic inert metal anode,” Light Metals, 56, No. 5, 377–381 (1999).
11. H. Wang and J. Thonstad, “The behavior of inert anodes as a function of some operating parameters,” Light Metals, 283–290 (1992).
12. J. A. Sekhar et al., “Micropyretically synthesized porous non-consumable anode in the Ni-Al-Cu-Fe-X system,” Light Metals, 347–354 (1997).
13. D. R. Sadoway, “Inert anodes for the Hall-Heroult cell: the ultimate materials challenge,” JOM, No. 5, 34–35 (2001).
14. J. Musil and J. Fiala, Surface Coatings and Technology, 52, 211 (1992).10.1016/0257-8972(92)90018-6 ↗
15. Huang Peiyun, Principle of Powder Metallurgy, Publishing House of Central South University of Technology, Changsha (1992), pp. 79–81.
16. Xiang Xin hua, Zhu Jing huan, et al., “Fabrication and microstructure of ZrO2/NiCrCoAlY graded coatings by plasmas praying,” Surface and Coatings Technology, 88, 66–69 (1996).