journal article·2013-05

Microstructural evolution of Cr–Cu composites in liquid-phase sintering

E. V. Khomenko, R. V. Minakova, N. D. Lesnik

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 1-2
Publisher page

Abstract

The paper examines the effect of temperature and volume fraction of refractory particles on the kinetics of their growth during liquid-phase sintering of Cr–Cu composites in the temperature range 1150–1350°C under a vacuum of (2–4)∙10–3 Pa. It is established that the growth kinetics of average-size particles is described by a near-cubic law and the decrease in their number is determined by a near-inverse dependence: the apparent activation energy (Q = 113 ± 10 kJ/mol) is of the order of magnitude comparable to that of diffusion in liquid metals. According to the Lifshitz–Slyozov–Wagner theory (LSW theory), diffusion coalescence is indicative of diffusion-controlled particle growth. Experimental growth constants are one order of magnitude higher than those calculated within the classical LSW theory. The increase in the growth rate constant with volume fraction of refractory particles varying from 0.4 to 0.7 and the change in the particle size distribution function after sintering for 90 min at 1200°C agree with the Ardell model, which modifies the LSW theory considering the effect of volume fraction of particles on their growth kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. G. G. Gnesin (ed.), Sintered Materials for Electrical Engineering and Electronics: Handbook [in Russian], Metallurgiya, Moscow (1981), p. 342.
2. P. G. Slade, The Vacuum Interrupter: Theory, Design, and Applications, CRC Press and Taylor & Francis (2008), p. 528.
3. V. V. Skorokhod, Yu. M. Solonin, and I. V. Uvarova, Chemical, Diffusion, and Rheological Processes in Powder Materials [in Russian], Naukova Dumka, Kiev (1990), p. 248.
4. O. I. Get’man, N. D. Lesnik, R. V. Minakova, and E. V. Khomenko, “Structuring on sintering in the presence of liquid phase in Cr–Cu–iron group metal systems. I. Cr-Cu system,” Powder Metall. Met. Ceram., 45, No. 5–6, 215–220 (2006).10.1007/s11106-006-0066-1 ↗
5. S. A. Saltykov, Stereometrical Metallography [in Russian], Metallurgiya, Moscow (1970), p. 371.
6. K. S. Chernyavskii, Stereology in Physical Metallurgy [in Russian], Metallurgiya, Moscow (1977), p. 268.
7. A. I. Khomenko and E. V. Khomenko, “Microstructural analysis software package,” Powder Metall. Met. Ceram., 46, No. 1–2, 100–104 (2007).10.1007/s11106-007-0016-6 ↗
8. N. D. Lesnik, R. V. Minakova, and E. V. Khomenko, “Chromium–copper system: adhesion characteristics, doping, the structure of phase boundary and composites,” Powder Metall. Met. Ceram., 40, No. 7–8, 432–440 (2001).
9. J. Gurland, “An estimate of contact and continuity of dispersions in opaque samples,” Trans. Metall. Soc. AIME, 236, 643–646 (1966).
10. H. Okamoto, “Cr–Cu (chromium–copper),” J. Phase Equilib., 22, No. 6, 691–692 (2001).10.1007/s11669-001-0048-4 ↗
11. W. D. Kingery, “Sintering in the presence of a liquid phase,” in: W. Kingery (ed.), Kinetics of High-Temperature Processes, John Wiley, New York (1959).10.7551/mitpress/4061.001.0001 ↗
12. I. M. Lifshitz and V. V. Slyozov, “On the kinetics of diffusion-controlled decomposition of solid solutions,” Zh. Éksp. Tekh. Fiz., 35, No. 2 (8), 479–492 (1958).
13. C. Wagner, “Theorie der alterung von niederschlagen durch umlosen,” Zeitschrift fur Electrochemie, 6, No. 7–8, 581–591 (1961).
14. S. Sarian and H. W. Weart, “Kinetic of coarsening of spherical particles in a liquid matrix,” J. Appl. Phys., 37, No. 4, 1675–1681 (1966).10.1063/1.1708583 ↗
15. N. M. Parikh and M. Humenik, “Cermets. II. Wettability and microstructure studies in liquid-phase sintering,” J. Am. Ceram. Soc., 40, No. 9, 315–320 (1957).10.1111/j.1151-2916.1957.tb12628.x ↗
16. R. Warren and M. B. Waldron, “Microstructural development during the liquid-phase sintering of cemented carbides,” Powder Metall., 15, No. 30, 167–201 (1972).10.1179/pom.1972.15.30.005 ↗
17. A. N. Niemi and T. H. Courtney, “Microstructural development and evolution liquid-phase sintered Fe–Cu alloys,” J. Mater. Sci., 16, 226–236 (1981).10.1007/BF00552076 ↗
18. Randall M. German, “Microstructure of the gravitationally settled region in liquid-phase sintered dilute tungsten heavy alloys,” Metal. Mater. Trans. A, 26A, 279–288 (1995).10.1007/BF02664666 ↗
19. W. Bender and L. Ratke, “Ostwald ripening of liquid phase sintered Cu–Co dispersions at high volume fractions,” Acta Mater., 46, No. 4, 1125–1133 (1998).10.1016/S1359-6454(97)00317-0 ↗
20. O. I. Get’man, V. N. Nizhenko, V. Ya. Petrishchev, and V. V. Skorokhod, “Microstructure of W–Ni–Sn composites in relation to amount of liquid phase on sintering,” Powder Metall. Met. Ceram., 44, No. 7–8, 347–352 (2005).10.1007/s11106-005-0101-7 ↗
21. H. Fischmeister and G. Grimvall, “Ostwald ripening—a survey,” in: G. C. Kuczynski (ed.), Materials Science Research, Vol. 6, Sintering and Related Phenomena, Plenum Press, New York (1973), pp. 119–149.
22. E. A. Moelwyn-Hughes, Physical Chemistry, Pergamon Press, London–New York–Paris (1962).
23. S. N. Zadumkin and A. A. Karashaev, “Relation between surface energies of metails in solid and liquid phases,” in: Surface Phenomena in Melts and Associated Solid Phases [in Russian], Kabard. Balkar. Knizh. Izd., Nal’chik (1960), pp. 85–88.
24. V. I. Nizhenko and L. I. Floka, Surface Tension of Liquid Metals and Alloys [in Russian], Metallurgiya, Moscow (1981), p. 208.
25. Yu. V. Naidich, V. N. Eremenko, V. V. Fesenko, et al., “Temperature dependence of the surface tension of pure copper,” in: Surface Phenomena in Metals and Alloys and Their Role in Powder Metallurgy Processes [in Russian], Naukova Dumka, Kiev (1961), pp. 62–69.
26. C. J. Smithells, Metals Reference Book, 5th ed., Butterworth, London (1976).
27. T. Ejima and M. Kameda, “Diffusion of iron and cobalt in liquid copper, J. Jap. Inst. Met., 34, 96–103 (1970).10.2320/jinstmet1952.34.5_546 ↗
28. A. J. Ardell, “The effect of volume on particle coarsening: theoretical consideration,” Acta Metall., 20, 61–71 (1972).10.1016/0001-6160(72)90114-9 ↗
29. A. J. Ardell and R. B. Nicholson, “The coarsening of γ’ in Ni–Al alloys,” J. Phys. Chem. Solids, 27, 1793–1804 (1966).10.1016/0022-3697(66)90110-7 ↗
30. Thae-Khapp Kang and Duk N. Yoon, “Coarsening of tungsten grain in liquid nickel–tungsten matrix,” Metal. Trans. A, 9A, 433–438 (1978).10.1007/BF02646395 ↗
31. Chan Hyoung Kang and Duk N. Yoon, “Coarsening of cobalt grains dispersed in liquid copper matrix,” Metal. Trans. A, 12A, 65–69 (1981).10.1007/BF02648509 ↗
32. Su Sok Kang and Duk N. Yoon, “Kinetics of grain during of Co–Cu and Fe–Cu alloys with low liquid contents,” Metal. Trans. A, 13A, 1405–1411 (1982).10.1007/BF02642878 ↗