journal article·2003-11

M. Yu. Bal'shin and the Mechanics of Powder Material Compaction

Mikhail B. Shtern

Powder Metallurgy and Metal Ceramics· Volume 42· Issue 11-12
Publisher page

Abstract

The connection of Bal'shin consolidation theory with contemporary compaction mechanics is considered. The main principles of Bal'shin and proposals for powder compaction theory formulated by him are analyzed. A connection is established between the identity principle and the hypothesis of the existence of a representative element, and one possible way of determining its dimensions is demonstrated. The main attention is devoted to the hypothesis of continuity and the results of compaction mechanics, which are obtained based on it. A connection is noted between consolidation theory and the concept of the mean-square viscous stresses of Skorokhod. Problems of Bal'shin are indicated that may easily be resolved by means of the concept of mean-square viscous stress. The relative solution of the problem of evaluating density distribution is noted. Problems are discussed for powder breaking directly during compaction in a rigid die. The contribution of scientists from Armenia, Belarus, Russia and Ukraine in setting up contemporary compaction mechanics is evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. M. Yu. Bal'shin, Powder Materials Science [in Russian], Metallurgizdat, Moscow (1948).
2. M. Yu. Bal'shin, Powder Metallurgy [in Russian], Metallurgizdat, Moscow (1948).
3. M. Yu. Bal'shin, Scientific Bases of Powder Metallurgy and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).
4. V. V. Skorokhod, “Mean-square stresses and strain rate in a viscously deformed porous body,” Poroshk. Metall., No. 12, 31-35 (1965).
5. V. V. Skorokhod, Rheological Bases of Sintering Theory [in Russian], Nauk. Dumka, Kiev (1972).
6. A. L. Gurson, “Continuum theory for ductile rupture by void nucleation and growth. Part 1. Yield criteria and flow rules for porous media,” J. Eng. Mater. Technol., 99, 2-15 (1977).10.1115/1.3443401 ↗
7. A. Needleman and J. R. Rice, Acta Met., 28, 1315-1331 (1980).10.1016/0001-6160(80)90001-2 ↗
8. A. Cocks, “Inelastic deformation of porous materials,” J. Mech. Phys. Solids, 37, 693-715 (1989).10.1016/0022-5096(89)90014-8 ↗
9. P. Safronis and R. M. McMeeking, “Creep of power-low materials containing spherical pores,” J. Appl. Mech., 25, 239-294 (1987).
10. N. F. Fleck, L. T. Kuhn, and R. M. McMeeking, “Yielding of metal powders bonded by isolated contacts,” J. Mech. Phys. Solids, 40, 1139-1162 (1992).10.1016/0022-5096(92)90064-9 ↗
11. M. B. Shtern, G. G. Serdyuk, L. A. Maksimenko, et al., Phenomenological Theories of Powder Compaction [in Russian], Nauk. Dumka, Kiev (1982).
12. M. B. Shtern, “Qualitative methods in mechanics of compaction,” Proc. Int. Workshop Modelling of Metal Powder Forming Processes, Grenoble (1997), pp. 168-178.
13. O. Coube and P. Brewin, “Modelling and numerical simulation of powder compaction,” Powder Metallurgy, 45, No. 1, 18-19 (2002).10.1179/003258902225002514 ↗
14. P. Brewin, O. Coube, P. Doremus, et al., “EU thematic network “Dienet”: modelling of powder die compaction,” Proc. Euro PM2001, Vol. 3, Shrewsbury (2001), pp. 246-254.
15. L. C. R. Schnider and A. C. F. Cocks, “Experimental investigation of yield behavior of metal powder compacts,” Powder Metallurgy, 45, No. 3, 237-247 (2002).10.1179/003258902225006998 ↗
16. M. Shtern and J. Mikhailov, “Defects formation in die-compaction: prediction and numerical analysis,” Proc. Euro PM2001, Vol. 3, Shrewsbury (2001), pp. 178-183.
17. J. P. Rice, “Localization of plastic deformation,” in: Theoretical and Applied Mechanics [Russian translation], Mir, Moscow (1979), pp. 439-470.
18. V. P. Katashinskii, “Localization of deformation during compaction of powder in unclosed dies,” in: Rheological Models and Deformation Processes for Porous Powder and Composite Materials [in Russian], Nauk. Dumka, Kiev (1985), pp. 145-152.