The Mechanical Properties of Compact Titanium Produced from Titanium Hydride Powders Using Self-Propagating High-Temperature Synthesis
Source abstract
Abstract
The mechanical properties of titanium compacts from titanium hydride powders produced by conventional heat treatment of titanium sponge in hydrogen and by self-propagating high-temperature synthesis are compared. It is shown that the strength and plastic characteristics of titanium from powders hydrogenated by self-propagating high-temperature synthesis are not worse and sometimes even better than those of titanium produced in the same way from conventional hydride powders. It is determined that titanium sintered from powders hydrogenated by self-propagating high-temperature synthesis commonly contains more oxygen compared to titanium sintered from powders hydrogenated by heat treatment in hydrogen. However, titanium made of powders from self-propagating high-temperature synthesis contains a lower content of other impurities decreasing its plasticity. It is assumed that the yield stress, ultimate strength, and plastic characteristics of titanium sintered from powders produced by different methods are determined by the quantitative and qualitative composition of impurities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. G. Lutjering and J. C. Williams, Titanium, 2nd ed., Springer, Berlin–Heidelberg (2007), p. 385.
2. O. M. Ivasishin, D. G. Savvakin, K. A. Bondareva, et al., “Production of titanium alloys and parts by a cost-efficient powder metallurgy method for full-scale industrial application,” Nauka Innovatsii, No. 2, 45–57 (2005).
3. S. K. Dolukhanyan, M. D. Nersesyan, A. B. Nalbandyan, et al., “Combustion of transition metals in hydrogen,” Dokl. Akad. Nauk SSSR, 231, No. 3, 675–678 (1976).
4. A. S. Rogachev and A. S. Mukas’yan, Combustion Synthesis of Materials: Introduction to Structural Macrokinetics [in Russian], Fizmatlit, Moscow (2012), p. 400.
5. V. I. Ratnikov, V. K. Prokudina, I. P. Borovinskaya, and A. G. Merzhanov, Method and Unit for Producing Titanium Hydride [in Russian], Russian Federation Patent 2385837, IPC C 01 B 6/02, Institute of Structural Macrokinetics and Materials Science of the Russian Academy of Sciences (applicant and patent holder), No. 2008107172/15, appl. February 28, 2008; publ. April 10 (2010), Bulletin No. 10.
6. V. I. Trefilov, V. F. Moiseev, É. P. Pechkovskii, et al., Strain Hardening and Decomposition of Polycrystalline Metals [in Russian], Naukova Dumka, Kiev (1989), p. 256.
7. A. I. Dekhtyar, I. V. Moiseeva, M. V. Matviichuk, et al., “Strain behavior of α + β titanium alloys synthesized by powder metallurgy methods,” Metallofiz. Noveish. Tekhnol., 31, No. 12, 1707–1716 (2009).
8. V. Kotko, V. F. Moiseev, É. P. Pechkovskii, et al., “Plastic deformation of multiphase titanium alloys,” Metallofiz. Noveish. Tekhnol., 23, No. 8, 1013–1207 (2001).