Kinetics and Mechanism of High-Temperature Oxidation in Air of Au - Cu Alloy
Source abstract
Abstract
We have used thermogravimetry to study the kinetics of high-temperature (up to 800 °C) oxidation of the alloy 58.3 mass% Au - 41.7 mass% Cu with isothermal heating of the specimens. Using petrographic analysis of the oxide layers, we determined the reaction products. We have shown that up to 200 °C, the indicated alloy is not oxidized at all. More rapid oxidation of the alloy is observed at temperatures above 400 °C. Up to 500 °C, an inner layer consisting of Cu2O predominates in the two-layer scale on the alloy, while the outer CuO layer has a significantly smaller thickness. At 600 °C, the upper layer of scale contains Cu2O while the lower layer contains Cu2O and gold. At higher temperatures, all the way up to 800 °C, the scale is two-layer as before but its upper layer contains CuO while its lower layer contains Cu2O and small gold rods distributed in that oxide. Thus we have established three oxidation regions characterized by different scale phase compositions and different mechanisms for the process, mainly due to transition from an ordered state of the alloy (intermetallic AuCu3) to a completely disordered solid solution of gold in copper. We used the Arrhenius equation to calculate the apparent activation energy for oxidation: E1 = 20.4 kJ/mole for the temperature range 400–500 °C and E2 = 9.5 kJ/mole for 600–800 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. O. Kubaschewski and B. E. Hopkins, Oxidation of Metals and Alloys [Russian translation], Izdat. Inostr. Lit., Moscow (1955).
2. I. N. Frantsevich, R. F. Voitovich, and V. A. Lavrenko, High-Temperature Oxidation of Metals and Alloys [in Russian], Gostekhizdat UkrSSR, Kiev (1963).
3. J. Benard (ed.), Oxidation of Metals, Vol. 1: Basic Processes [Russian translation from French], Metallurgiya, Moscow (1968).
4. I. N. Frantsevich, V. A. Lavrenko, A. N. Pilyankevich, et al., Anodic Oxide Coatings on Light Alloys [in Russian], Nauk. Dumka, Kiev (1977).
5. N. A. Toropov, et al., Phase Diagrams of Silicate Systems: Handbook. Issue 2. Metal-Oxygen Compounds [in Russian], Nauka, Leningrad (1969).
6. E. A. Moelwyn-Hughes, Physical Chemistry [Russian translation], Izdat Inostr. Lit., Moscow (1962).
7. T. B. Massalski (ed.), Binary Alloy Phase Diagrams, 2nd Edition, ASM, Metals Park (Ohio) (1990).
8. Ya. S. Umanskii and B. N. Finkel'shtein, Physical Principles of Metallurgy [in Russian], Gostekhizdat, Moscow (1955).