journal article·2020-11

Electrochemical Corrosion of Composite Ceramics and Thermal Spray Coatings in the ZrB2–SiC–AlN System

O. N. Grigoriev, V. A. Shvets, I. A. Podchernyaeva, D. V. Yurechko, D. V. Vedel, A. A. Zubarev, I. V. Smirnov, V. I. Kopylov, V. N. Talash, Yu. B. Rudenko

Powder Metallurgy and Metal Ceramics· Volume 59· Issue 7-8
Publisher page

Abstract

Polarization studies of the ZrB2–SiC–AlN compact ceramic material and thermal spray coatings of the same composition were conducted in a 3% NaCl solid solution to analyze their cathodic and anodic behavior. The compact ceramic material was produced by hot pressing, the plasma-sprayed coating 240 μm thick was deposited onto a C/C–SiC graphite substrate, and the detonation-sprayed coating 340 μm thick was applied to 12Kh18N9T stainless steel. The microstructure and phase composition of the compact sample and thermal spray coatings were examined. The microstructure was heterophase in all cases. The compact sample and plasma-sprayed coating contained SiC, AlN, and ZrB2 as the main phases, and the detonation-sprayed coating additionally had a small amount of nickel and zirconium oxide. Electron microprobe analysis showed that the plasma-sprayed coating had 20 wt.% oxygen; i.e., the coating contained oxide phases in the amount not revealed by X-rays. The compact ceramic sample showed exceptionally high resistance to electrochemical oxidation: electrochemical potential, Ecorr, at which corrosion current occurs is very high and constitutes +1.51 eV. For the detonation- and plasma-sprayed coatings, Ecorr = –0.25 and –0.05 eV, respectively. The great resistance of the compact ceramic material to electrochemical oxidation correlates with its resistance to high-temperature oxidation above 1700°C. This is due to the formation of an Al2O3–SiO2 mullite film on the surface. The lower resistance of the coatings to electrochemical oxidation compared to the compact material is associated with their increased porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. N. Fredj, S. Cohendoz, X. Feaugas, and S. Touzain, “Ageing of marine coating in natural and artificial seawater under mechanical stresses,” Prog. Org. Coat., 74, No. 2, 391–399 (2012).10.1016/j.porgcoat.2011.10.002 ↗
2. V.A. Lavrenko, M. Desmaison-Brut, J. Desmaison, V.A. Shvets, and V.N. Talash, “Kinetics of electrochemical process on surface of TiB2–AlN, TiB2–TiN and TiC0.5N0.5 ceramics in 3% NaCl solution,” in: Proc. Int. Conf. Advanced Materials, Kyiv (1999), p. 37.
3. V.A. Shvets, V.A. Lavrenko, and V.N. Talash, “Corrosion behavior of zirconium nitride with various nitrogen contents in a 3% NaCl solution,” Fiz. Khim. Mekh. Mater., Special Issue 3, 185–188 (2002).
4. V.A. Lavrenko, V.A. Shvets, V.N. Talash, O.A. Frenkel, and T.V. Khomko, “Corrosion behavior of titanium nitride with various nitrogen contents in a 3% NaCl solution,” Fiz. Khim. Mekh. Mater., Special Issue 4, 748–751 (2004).
5. A.D. Chirkin, V.A. Lavrenko, A.D. Panasyuk, and V.N. Talash, “Corrosion resistance of WSi2 and TiB2 solid solutions and WSi2–TiB2 mechanical mixtures in a 3% NaCl solution,” Fiz. Khim. Mekh. Mater., Special Issue 5, 471–475 (2006).
6. V.A. Lavrenko, A.D. Chirkin, A.D. Panasyuk, and V.N. Talash, “Growth kinetics of SiO2 nanofilm on MoSi2 in anodic polarization,” Powder Metall. Met. Ceram., 47, No. 1–2, 124–128 (2008).10.1007/s11106-008-0017-0 ↗
7. V.A. Shvets, V.A. Lavrenko, V.I. Subotin, V.N. Talash, and L.I. Kuznetsova, “Anodic oxidation of SiC–TiB2–B4C composites in 3% NaCl solution,” Powder Metall. Met. Ceram., 49, No. 11–12, 702–706 (2011).10.1007/s11106-011-9291-3 ↗
8. V.A. Shvets, V.A. Lavrenko, V.N. Talash, and Yu.B. Rudenko, “Physicochemical properties of SiC–ZrB2 and SiC–ZrB2–ZrSi2 composites in high-temperature and electrochemical oxidation,” in: Proc. Int. Conf. Materials Science of Refractory Compounds: Advances and Issues [in Russian] (May 18–20, 2010, Kyiv, Ukraine), Inst. Probl. Materialoved. NAN Ukrainy, Kyiv (2010), p. 23.
9. V.A. Lavrenko, V.N. Talash, I.A. Podchernyaeva, A.D. Panasyuk, V.M. Panashenko, and D.V. Yurechko, “Corrosion behavior of zirconium diboride-based ceramics and electrospark coatings in 3% NaCl solution,” Powder Metall. Met. Ceram., 46, No. 1–2, 43–45 (2007).10.1007/s11106-007-0008-6 ↗
10. V.A. Lavrenko, V.N. Talash, and V.A. Shvets, “Corrosion of AlN–TiN ceramics in 3% NaCl solution,” Powder Metall. Met. Ceram., 54, No. 5–6, 340–343 (2015).10.1007/s11106-015-9719-2 ↗
11. G.V. Samsonov, I.F. Pryadko, and L.F. Pryadko, Electron Localization in Solids [in Russian], Nauka, Moscow (1976), p. 338.
12. O.N. Grigoriev, A.D. Panasyuk, I.A. Podchernyaeva, I.P. Neshpor, and D.V. Yurechko, “Mechanism of high-temperature oxidation of ZrB2-based composite ceramics in the ZrB2–SiC–AlN system,” Powder Metall. Met. Ceram., 57, No. 1–2, 71–74 (2018).10.1007/s11106-018-9956-2 ↗
13. O.N. Grigoriev, I.A. Podchernyaeva, D.V. Yurechko, A.U. Stelmakh, M.A. Vasilkovska, and V.M. Panashenko, “Structural and phase transformations in plasma-spray ZrB2–SiC–AlN coatings on a C/C–SiC substrate after high-temperature thermal cyclic heating,” Powder Metall. Met. Ceram., 58, No. 5–6, 341–350 (2019).10.1007/s11106-019-00084-x ↗
14. A.S. Berezhnoi, Multicomponent Oxide Systems [in Russian], Kyiv (1970), p. 572.