Formation and high-temperature oxidation of thermal-barrier coatings with Ti-Al-Cr binding layer
Source abstract
Abstract
The behavior of TiAlCr detonation coatings with an outside thermal barrier layer in high-temperature oxidation in air is examined. It is established that the efficiency of thermal-barrier coatings with a zirconia external layer on substrates of Ti-rich alloys and γ-TiAl depends on the oxidation of the binding TiAlCr layer and the diffusion at the coating-substrate interface. It is shown that the presence of a ceramic layer has no fundamental effect on the oxidation of γ-TiAl-based coatings. The behavior of TiAlCr coatings in high-temperature oxidation depends on the substrate structure, which determines the nature of diffusion at the coating-substrate interface. If the substrate is made of titanium-rich alloys, there is active diffusion of Al and Cr from and of Ti into the coating. Since the Al/Ti activity ratio changes, a mixed layer of TiO2 and Al2O3 forms on the surface. In case of the γ-TiAl substrate, a layer on the TiAlCr surface consists of Al2O3 alone.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. M. P. Brady, W. J. Brindley, J. L. Smialec, and I. E. Lossi, “Oxidation and protection of γ titanium aluminides,” JOM, November, 46–50 (1996).10.1007/BF03223244 ↗
2. M. P. Brady, J. L. Smialek, J. Smith, et al., “The role of Cr in promoting protective alumina scale formation by γ-based Ti-Al-Cr alloys. II. Oxidation behavior in air,” Acta Mat., 45(6), 2371–2382 (1997).10.1016/S1359-6454(96)00361-8 ↗
3. V. E. Oliker and V. S. Kresanov, “Structure and properties of detonation coatings based on γ-TiAl,” Powder Metall. Met. Ceram., 39, No. 11–12, 590–593 (2000).10.1023/A:1011380231244 ↗
4. V. E. Oliker and V. S. Kresanov, “Scandium-containing gamma titanium aluminide alloys and coatings for aerospace structural parts,” in: Advanced Materials and Processes for Gas Turbines, TMS, Warrendale, Pensylvania (2003), pp. 293–300.
5. V. E. Oliker, V. L. Sirovatka, I. I. Timofeeva, et al., “Hrechyshkin. Formation of detonation coatings based on titanium aluminide alloys and aluminum titanate ceramic sprayed from mechanically alloyed powders Ti-Al,” Surface & Coatings Technology, Vol. 200, 11, 3573–3581 (2005).
6. V. O. Lavrenko, S. O. Firstov, A. D. Panasyuk, et al., “Corrosion of titanium-aluminum intermetallides. Part 1. High-temperature oxidation of γ-TiAl, TiAl3, and α2-Ti3Al,” Powder Metall. Met. Ceram., 42, No. 3–4, 184–188 (2003).10.1023/A:1024914017035 ↗
7. F. H. Froes, C. Surynarayana, K. Russell, C.-G. Li, “Synthesis of intermetallics by mechanical alloying,” J. Mat. Sci., A192/193, 612–623 (1995).
8. G. S. Fox-Rabinovich, G. C. Weatherly, D. S. Wilkinson, et al., “The role of chromium in protective alumina scale formation during the oxidation of ternary TiAlCr alloys in air,” Intermetallics, 16, 14–30 (2003).
9. L. J. Parfitt, J. L. Smialek, J. P. Nic, and D. E. Mikkola, “Oxidation behavior of cubic phases formed by alloying Al3Ti with Mn and Cr,” Scripta. Met. Mat., 25, 727–731 (1991).10.1016/0956-716X(91)90123-I ↗
10. D. Dewald, M. Austin, E. Laitila, and D. Mikkola, “Cubic titanium trialuminide thermal spray coatings-A Review,” J. Thermal Spray Technology, 10, No. 1, 111–117 (2001).10.1361/105996301770349574 ↗
11. V. Gauthier, F. Dettenwanger, M. Schutze, “Oxidation behavior of γ-TiAl coated with zirconia thermal barriers,” Intermetallics, 10, 667–674 (2002).10.1016/S0966-9795(02)00036-5 ↗
12. F. Dettenwanger, E. Schuman, M. Ruhle, et al., “Microstructural study of oxidized TiAl,” Oxidat. Met., 50, No. 3–4, 269 (1998).10.1023/A:1018892422121 ↗
13. U. Figge, A. Elschner, N. Zheng, et al., “Surface analytical investigations on the oxidation behavior of TiAl-base intermetallics. Fresenius,” J. Anal. Chem., 346, 75–78 (1995).10.1007/BF00321386 ↗
14. G. H. Meier, F. S. Pettit, and S. Hu, “Oxidation behavior of titanium aluminides,” J. Physiques, 4, No. 3, 395–402 (1993).
15. S. Becker, A. Rahmel, M. Schorr and M. Schutze, “Mechanism of isothermal oxidation of the intermetallic TiAl and TiAl alloys,” Oxid. Met., 38, No. 5–6, 425–464 (1992).10.1007/BF00665663 ↗
16. R. F. Voitovich and É. I. Golovko, High-Temperature Oxidation of Titanium and Its Alloys m[in Russian], Naukova Dumka, Kiev (1984), p. 256.