Structural dispersion of powder titanium in the optimal conditions of dynamic hot pressing
Source abstract
Abstract
The effect of dynamic hot pressing temperature on the mechanical properties of powder titanium is studied. The best properties are demonstrated by titanium samples pressed at 910°C. Fine-grained structure with 2–5 μm grains forms under these conditions. This permits 25% increase in the strength of the material as compared with conventionally produced titanium.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Yu. N. Podrezov, V. A. Nazarenko, A. V. Laptev, et al., “Mechanical properties of powder titanium at different production stages. IV. Mechanical properties and contact formation in powder titanium produced by dynamic hot pressing,” Powder Metall. Met. Ceram., 48, No. 5–6, 295–301 (2009).10.1007/s11106-009-9130-y ↗
2. M. L. Bershtein, S. V. Dobatkin, L. M. Kaputkina, and S. D. Prokoshkin, Hot-Deformation Diagrams, Structure and Properties of Steels [in Russian], Metallurgiya, Moscow (1989).
3. L. A. Poznyak, Yu. N. Podrezov, V. A. Shtakun, et al., “Structural changes during high-temperature plastic deformation of high-speed powder steels,” in: Powder Tool Steels [in Russian], Inst. Probl. Materialoved. AN Ukrainy, Kyiv (1992), pp. 72–77.
4. K. A. Gogaev, V. A. Shtakun, V. S. Kropelev, et al., “Determining the resistance to hot deformation of high-speed powder steels,” in: Powder Tool Steels [in Russian], Inst. Probl. Materialoved. AN Ukrainy, Kyiv (1990), pp. 88–96.
5. M. S. Koval’chenko, “Strain hardening of a powder body in pressing,” Powder Metall. Met. Ceram., 48, No. 3–4, 133–144 (2009).10.1007/s11106-009-9118-7 ↗
6. E. M. Borisovskaya, V. A. Nazarenko, Yu. N. Podrezov, et al., “Mechanical properties of powder titanium at different production stages. I. Densification curves for titanium powder billets,” Powder Metall. Met. Ceram., 47, No. 7–8, 406–413 (2008).10.1007/s11106-008-9035-1 ↗
7. E. M. Borisovskaya, V. A. Nazarenko, Yu. N. Podrezov, et al., “Self-propagating high-temperature synthesis of ultrafine and nanosized WC and TiC powders,” Powder Metall. Met. Ceram., 47, No. 9–10, 505–511 (2008).
8. Yu. N. Podrezov, V. A. Nazarenko, and A. V. Vdovichenko, “Mechanical properties of powder titanium at different production stages. III. Contact formation in powder titanium based on examination of mechanical properties in sintering,” Powder Metall. Met. Ceram., 48, No. 3–4, 201–110 (2009).10.1007/s11106-009-9111-1 ↗
9. G. V. Samsonov, Properties of Elements, Part 1. Physical Properties [in Russian], Metallurgiya, Moscow (1976).
10. S. A. Firstov, A. N. Demidik, I. I. Ivanov, et al., Structure and Strength of Powder Materials [in Russian], Naukova Dumka, Kyiv (1993).