Assessment of Gas Saturation of Titanium Alloys Synthesized From Powders Using Twist Extrusion
Source abstract
Abstract
The gas saturation of semi-finished titanium alloys produced from metal powder using the technique comprising cold pressing, vacuum sintering, and subsequent severe plastic deformation by twist extrusion is analyzed. The main sources are considered and the quantitative analysis of pollution of sintered alloys with nitrogen and oxygen impurities contained in the powder particles on their surface and in the pore spaces of the billet is conducted. It is established that the quality of the starting titanium powder has the biggest impact on the pollution of alloys. It is shown that the use of titanium powders with low content of impurities allows keeping the oxygen and nitrogen content of synthesized semi-finished products at the level meeting the requirements of the reference documentation for VT1-0 titanium and heat-resistant titanium alloys. It is shown that the share of impurities entering the synthesized alloy from (i) the oxides on the powder particle surface and (ii) the air filling the closed pore space of the billet is insignificant.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. V. M. Ustinov, Yu. G. Olesov, L. N. Antipin, and V. A. Drozdenko, Powder Metallurgy of Titanium [in Russian], Metallurgiya, Moscow (1973), p. 248.
2. S. G. Glazunov, Powder Metallurgy of Titanium Alloys [in Russian], Metallurgiya, Moscow (1989), p. 134.
3. D. V. Pavlenko and A. V. Ovchinnikov, “Technical and economic aspects of flow charts for producing titanium alloy billets for GTE blades,” Vest. Dvigatelestr., No. 1, 98–103 (2014).
4. C. Haase, R. Lapovok, H. P. Ng, and Y. Estrin, “Production of Ti–6 A1–4 V billet through compaction of blended elemental powders by equal-channel angular pressing,” Mater. Sci. Eng. A, 550, 263–272 (2012).10.1016/j.msea.2012.04.068 ↗
5. R. Lapovok, D. Tomus, and B. C. Muddle, “Low-temperature compaction of Ti–6 A1–4 V powder using channel angular extrusion with back pressure,” Mater. Sci. Eng. A, 490, 171–180 (2008).10.1016/j.msea.2008.01.075 ↗
6. P. Luo, H. Xie, M. Paladugu, et al., “Recycling of titanium machining chips by severe plastic deformation consolidation,” Mater. Sci., 45, 4000–4612 (2010).
7. A. V. Altukhov, A. F. Tarasov, and A. V. Perig, “Systemizing processes of severe plastic deformation for the formation of ultra-fine grain and nanocrystalline structures in solid billets,” Pisma Mater., 2, 54–59 (2012).
8. R. Z. Valiev, Y. Estrin, Z. Horita, et al., “Producing bulk ultrafine-grained materials by severe plastic deformation: Ten years later,” J. Minerals, Metals Mater. Soc., 68, No. 4, 1216–1226 (2016).10.1007/s11837-016-1820-6 ↗
9. Y. Beygelzimer, Y. Estrin, and R. Kulagin, “Synthesis of hybrid materials by severe plastic deformation: A new paradigm of SPD processing,” Adv. Eng. Mater., 17, No. 12, 1853–1861 (2015).10.1002/adem.201500083 ↗
10. F. L. Leokha, and S. N. Ratiev, “Modern techniques for producing oxygen-alloyed titanium alloys,” Metalurgiya, No. 1(14) –2(15), 85–94 (2012).
11. G. G. Belousov, A. D. Nikitin, and A. A. Shanyavskii, “Model of fatigue fracture during operating of titanium disk of TA12-60 engine fan,” Nauch. Vest. Mosk. Gos. Tekh. Univ. Grazhd, Aviats., No. 187, 103–107 (2013)
12. Y. Beygelzimer, “Vortices and mixing in metals during severe plastic deformation,” Mater. Sci. Forum, 683, 213–224 (2011).10.4028/www.scientific.net/MSF.683.213 ↗
13. D. V. Pavlenko and Y. Beygelzimer, “Vortices in noncompact blanks during twist extrusion,” Powder Metall. Met. Ceram., 54, Nos. 9–10, 517–524 (2015).
14. X. Wang, M. Hu, Z. Zhu, et al., “Influence of twist extrusion process on consolidation of aluminum powder in tubes by equal channel angular pressing,” Nonferrous Met. Soc. China, No. 25, 2122–2129 (2015).10.1016/S1003-6326(15)63823-7 ↗
15. D. V. Pavlenko and A. V. Ovchinnikov, “Effect of deformation by the method of screw extrusion on the structure and properties of VT1-0 alloy in different states,” Mater. Sci., 51, No. 1, 52–60 (2015).10.1007/s11003-015-9809-9 ↗
16. O. M. Shapovalova and E. P. Babenko, “Effect of heating temperature on gas saturation of Ti-powders,” Nov. Mater. Tekhnol. Metall. Mashinostr., No. 2, 93–96 (2008).
17. O. M. Shapovalova and E. P. Babenko, “Features of obtaining sintered products from titanium powders produced by electrolysis,” Vest. Khar. Nats. Avtom. Dor. Univ., No. 33, 33–36 (2006).
18. P. I. Loboda, E. G. Byba, M. O. Sysoev, and O. S. Hutsu, “Structure and properties of titanium produced by sintering TiH2 powders,” Fiz. Khim. Tverd. Tila, 12, No. 2, 465–469 (2011).
19. O. M. Ivasishin, D. G. Savvakin, M. M. Gumenyak, and O. B. Bondarchuk, “Role of surface pollution in titanium PM,” Eng. Mater., 520, 121–132 (2012).
20. N. P. Nechaev, Yu. P. Kudryavskii, and S. V. Mushkov, “Physical and chemical treatment of titanium powders against pollutants,” Usp. Sovr. Estestvozn., No. 8, 45–46 (2005).
21. O. M. Shapovalova and E. P. Babenko, “Study of structure and properties of crystals of refined high-purity titanium during heating,” Vest. Dvigatelestr., No.1, 134–138 (2009).
22. S. S. Kiparisov, Powder Metallurgy [in Russian], Metallurgiya, Moscow (1980), p. 496.
23. S. Axelsson, Surface Characterization of Titanium Powders with X-ray Photoelectron Spectroscopy, Path: http://publications.lib.chalmers.se/records/fulltext/164534.pdf .
24. N. P. Lyakishev (Ed.), State Diagrams of Binary Metallic Systems: Handbook [in Russian], Vol. 3, Book 1, Mashinostroenie, Moscow (2001), p. 872.
25. I. Vaquila, I. Vergara, M. C. G. Jr Passeggi, et al., “Chemical reactions at surfaces: titanium oxidation,” Surf. Coat. Technol., 122, No. 1, 67–71 (1999).10.1016/S0257-8972(99)00420-X ↗
26. O. A. Snizhko and V. V. Pashinskii, “Features of structurization of Ti–O alloys produced by chamber electroslag remelting,” Fiz. Tekh. Vys. Davl., 21, No. 4, 139–147 (2011).
27. A. V. Ovchinnikov, “Effect of Alloying Spongy Titanium with Oxygen on the Structure and Mechanical Properties of Cast Titanium,” in: Proceedings of International Conference “Ti-2007 in CIS” (2007), pp. 170–173.
28. A. D. Ryabtsev, S. I. Davydov, A. A. Troyanskii, et al., “Producing high-strength titanium by alloying with oxygen during chamber electroslag remelting,” Elektroshlak. Tekhnol., No. 3, 3–6 (2007).
29. D. V. Pavlenko, “Techniques for compacting sintered titanium billets,” Vest. Dvigatelestr., No. 1, 87–93 (2015).
30. D. V. Pavlenko, “Material science aspects of resource-recovery technologies for producing titanium semifinished products,” Tekhnol. Sistemy, No. 4 (65), 21–29 (2013).
31. J. Slotwinski, Properties of Metal Powders for Additive Manufacturing: A Review of the State of the Art of Metal Powder Property Testing, Path: https://doi.org/10.6028/NIST.IR.7873 .10.6028/NIST.IR.7873 ↗
32. A. P. Karnaukhov, Adsorption. Texture of Dispersed and Porous Materials [in Russian], Nauka, SO RAN, Novosibirsk (1999), p. 469.
33. V. A. Boguslaev, V. K. Yatsenko, and V. F. Pritchenko, Engineering Support and Prediction of Carrying Capacity of GTE Details [in Russian], JSC Motor Sich, Zaporizhzhya (2006), p. 336.
34. D. V. Pavlenko, “Effect of titanium powder parameters on the strength of sintered semi-finished products,” Novi Mater. Tekhnol. Metall. Mashinobud., No. 2, 87–92 (2014).