journal article·2014-05

Effect of the Chemical Composition of Electrode Materials and deposition Parameters on the Properties of Electrospark-Deposited Coatings. I. Mass Transfer Rate and Coating Composition

V. P. Konoval, O. P. Umanskii, A. D. Panasyuk, O. F. Lukyanchuk

Powder Metallurgy and Metal Ceramics· Volume 53· Issue 1-2
Publisher page

Abstract

Cermet coatings based on Ni–Al alloys and titanium–chromium diboride are electrospark-deposited onto 40Kh steel. It is analyzed how the metal-to-refractory phase ratio in the electrode material and the deposition parameters influence the mass-transfer kinetics, thickness, and composition of the coatings. Higher metal content of the electrode material activates mass transfer and increases thickness of the coatings (up to 700 μm). The integrity, roughness, and thickness of the coatings can be controlled by varying electrospark deposition parameters and chemical composition of the electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Coatings · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. N. I. Lazarenko, Electrospark Alloying of Metallic Surfaces [in Russian], Mashinostroenie, Moscow (1976), p. 44.
2. G. V. Samsonov, A. D. Verkhoturov, G. A. Bovkun, and V. S. Sychev, Electrospark Alloying of Metallic Surfaces [in Russian], Naukova Dumka, Kiev (1976), p. 220.
3. V. S. Kovalenko, A. D. Verkhoturov, L. F. Golovko, and I. A. Podchernyaeva, Laser and Electrospark Erosion Hardening [in Russian], Nauka, Moscow (1986), p. 276.
4. A. D. Verkhoturov, I. A. Podchernyaeva, N. S. Stolyarova, et al., Electrospark-Deposited Coatings from New Heterophase Materials [in Russian], Inst. Gorn. Dela DVO AN SSSR, Vladivostok (1987), p. 60.
5. V. P. Konoval, O. P. Umanskii, A. D. Panasyuk, et al., “Electrospark deposition of coatings from titanium–chromium carbide and diboride composites,” Sverkhtverd. Mater., No. 4, 84–91 (2009).
6. 6. V. M. Panashenko, I. A. Podchernyaeva, and O. N. Grigor’ev, “Mass transfer and structural and phase transformations during electrospark deposition of AlN and ZrB2 ceramics,” in: Electrical Contacts and Electrodes (Collected Scientific Papers) [in Russian], Inst. Probl. Materialoved. NAN Ukrainy, Kiev (2001), pp. 221–226.
7. A. D. Verkhoturov, V. G. Radchenko, A. D. Panasyuk, et al., Mechanized Vibration-Free Electrospark Erosion Hardening of Tool Steel with Tungsten-Free Electrode Materials [in Russian], Inst. Mashinoved. Metall. DVO AN SSSR, Vladivostok (1990), p. 84.
8. I. A. Podchernyaeva, A. D. Panasyuk, and V. A. Lavrenko, “Electric-spark alloying of structural alloys with a composite based on TiCN–AlN,” Powder Metall. Met. Ceram., 39, No. 5–6, 232–238 (2000).10.1007/BF02684673 ↗
9. 9. I. A. Podchernyaeva, V. A. Lavrenko, and A. P. Umansky, “Formation and properties of electric-spark coatings on WC–Co alloy surface using TiCN–AlN electrode material,” in: Proc. Conference and Exhibition of the European Ceramic Society, Brighton, Great Britain (1999), Vol. 1, pp. 233–234.
10. A. V. Paustovskii, G. A. Frolov, V. I. Novikova, et al., “Changes structure and physicochemical properties of spark coatings based on TiN and TiB2 after treatment with concentrated solar radiation,” Powder Metall. Met. Ceram., 44, No. 7–8, 358–362 (2005).10.1007/s11106-005-0103-5 ↗
11. A. D. Verkhoturov, I. A. Podchernyaeva, L. F. Pryadko, and F. F. Egorov, Electrode Materials for Electrospark Deposition [in Russian], Nauka, Moscow (1988), p. 224.
12. V. P. Konoval, V. Zh. Shemet, B. Grushko, et al., “Structure and properties of titanium–chromium diboride composites,” Powder Metall. Met. Ceram., 51, No. 7–8, 429–436 (2012).10.1007/s11106-012-9452-z ↗
13. G. V. Samsonov, L. Ya. Markovskii, A. F. Zhigach, and M. G. Valyashko, Boron: Compounds and Alloys [in Russian], Izv. AN USSR, Kiev (1960), p. 590.
14. M. S. Koval’chenko, L. F. Ochkas, and D. Z. Yurchenko, “Wear-resistant hard metals based on the binary titanium–chromium diboride,” Powder Metall. Met. Ceram., 21, No. 11, 876–879 (1982).10.1007/BF00805479 ↗
15. L. H. Li, H. E. Kim, and E. S. Kang, “Sintering and mechanical properties of titanium diboride with aluminum nitride as a sintering aid,” J. Eur. Ceram. Soc., 22, 973–977 (2002).10.1016/S0955-2219(01)00403-4 ↗
16. V. D. Belik, R. V. Litvin, and M. S. Koval’chenko, “Effect of pulse duration and size of interelectrode interval on electric-spark spraying. I. Effect of pulse duration and size of interelectrode interval on rate of electric-spark transfer,” Powder Metall. Met. Ceram., 45, No. 11–12, 593–598 (2006).10.1007/s11106-006-0124-8 ↗
17. A. D. Verkhoturov and I. M. Mukha, Technology of Electrospark Alloying of Metallic Surfaces [in Russian], Tekhnika, Kiev (1982), p. 181.