Research into sintering and related phenomena: personal experience
Source abstract
Abstract
*The studies on deformation and diffusion processes during sintering are analyzed. Attention is paid to the effect of compressive and tensile stresses on shrinkage of silver, copper, and nickel powders. Superplastic deformation and displacement of particles as a whole are observed during shrinkage. Self-diffusion in transition metal carbides as well as their creep and neck growth during sintering are widely studied. The theory of effective diffusion coefficient is developed to be applied to diffusion-controlled processes in interstitial phases. The proposed relationships are shown to be applicable to creep and neck growth during sintering. Areas of further nanoscale studies are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. R. A. Andrievskii, Research into the Mechanism of Variation in Density and Properties of Single- Component Cermets during Sintering [in Russian], Author’s Abstract of PhD Thesis, Kiev Politekh. Inst., Kiev (1959), p. 16.
2. R. A. Andrievskii, “Some problems of the sintering theory for metal powders,” in: Problems of Powder Metallurgy and Strength of Materials [in Russian], Izd. AN USSR, Kiev (1958), Issue 5, pp. 54–72.
3. W. Dawihl and W. Rix, “Beenflusing den Schwun des durch Zugkräfle beim Sintern von Metallpulvern,” Z. Metallkunde, 40, No. 2, 115–117 (1949).
4. Ya. E. Geguzin and B. Ya. Sukharevskii, “On sintering of metal powders under pressure,” Zh. Tekh. Fiz., 24, No. 9, 1613–1618 (1954).
5. R. A. Andrievskii and I. M. Fedorchenko, “On plastic deformation of porous silver bodies during sintering,” Dop. AN USSR, No. 5, 531–534 (1958).
6. I. M. Fedorchenko and R. A. Andrievskii, “On effect of compressive stresses on shrinkage of porous bodies during sintering,” Dop. AN USSR, No. 3, 281–285 (1959).
7. R. A. Andrievskii and I. M. Fedorchenko, “On creep processes in ceramic briquettes during sintering,” in: Problems of Powder Metallurgy and Strength of Materials [in Russian], Izd. AN USSR, Kiev (1960), Issue VIII, pp. 24–36.
8. I. M. Fedorchenko and R. A. Andrievsky, “The mechanism of sintering in single-component systems,” Powder Metall., No. 3, 147–171 (1959).
9. I. M. Fedorchenko and R. A. Andrievskii, “On the mechanism of sintering in single-component systems,” Poroshk. Metall., No. 1, 9–19 (1961).
10. I. M. Fedorchenko and R. A. Andrievskii, Fundamentals of Powder Metallurgy [in Russian], Izd. AN USSR, Kiev (1961), p. 420.
11. G. C. Kuczynski (ed.), Sintering and Related Phenomena, Plenum Press, New York (1973), p. 451.
12. G. C. Kuczynski (ed.), Sintering Processes, Plenum Press, New York (1980), p. 575.
13. R. A. Andrievskii, “Effect of uniaxial stresses on sintering shrinkage,” Powder Metall. Met. Ceram., 27, No. 11, 847–849 (1988).10.1007/BF00796962 ↗
14. V. V. Skorokhod, Rheological Basis of Sintering Theory [in Russian], Naukova Dumka, Kiev (1972), p. 150.
15. Ya. E. Geguzin, Physics of Sintering [in Russian], Nauka, Moscow (1984), p. 312.
16. Skorokhod (ed.), W. Hermel, B. Kijbak, W. Schatt, et al., Processes of Mass Transfer in Sintering [in Russian], Naukova Dumka, Kiev (1987), p. 152.
17. W. Schatt, Sintering Processes, Fundamentals [in German], VDI-Verlag, Düsseldorf (1992), p. 275.
18. R. A. Andrievskii, I. I. Spivak, and V. V. Klimenko, “Superplasticity of refractory compounds,” Dokl. AN SSSR, 203, No. 6, 1279–1281 (1972).
19. R. A. Andrievskii and I. I. Spivak, “Superplasticity in powder metallurgy processes and cermets,” in: Proc. All-Union Sci. Conf. Cermet Materials and Products [in Russian], N. V. Manukyan (ed.), Erevan Politekh. Inst., Erevan (1973), 143–149.
20. R. A. Andrievskii, “Sintering and peculiarities of self-diffusion, thermodynamics and creep of high-melting compounds,” in: Proc. 2nd Int. Summer School Synthetic Materials for Electronics, Jachranka near Warsaw (October 8–10, 1979, Amsterdam), Elsevier Sci. Publ., Amsterdam (1981), pp. 53–75.
21. W. Schatt, Yu. I. Boiko, and E. Friedrich, “Sintering of Cu powder,” Powder Met. Int., 16, No. 1, 9–11 (1984).
22. R. A. Andrievskii and S. É. Zeer, “Zonal separation in the sintering of an ultrafine nickel powder,” Powder Metall. Met. Ceram., 24, No. 7, 536–539 (1985).10.1007/BF00795185 ↗
23. R. A. Andrievskii, S. É. Zeer, and M. A. Leont’ev, “Pressing and sintering of ultrafine nickel and silicon nitride powders,” in: Physics and Chemistry of Ultrafine Systems [in Russian], Nauka, Moscow (1987), pp. 197–203.
24. R. A. Andrievskii, “Consolidation of ultrafine powders,” in: Proc. 1986 Int. Powder Metall. Conf. Horizons in Powder Metallurgy, Verlag Schmid, Freiburg (1986), Part. II, pp. 827–830.
25. R. A. Andrievskii, Yu. S. Konyaev, M. A. Leontiev, and G. I. Pivovarov, “Effect of high pressures on structure and properties of silicon nitride,” in: High Pressure Research, Gordon and Breach Scientific Publ., London (1989), Vol. 1, pp. 329–331.
26. R. A. Andrievskii, Powder Materials Science [in Russian], Metallurgiya, Moscow (1991).
27. R. A. Andrievskii, “Nanoctystalline high-melting point compound-based materials,” J. Mater. Sci., 29, No. 3, 614–631 (1994).10.1007/BF00445970 ↗
28. R. A. Andrievskii, V. S. Urbanovich, N. P. Kobelev, and V. M. Kuchinski, “Structure, density and properties evolution of TiN ultrafine powders under high pressures and high temperatures,” in: Fourth Euro Ceramics, Basic Science, Trends in Emerging Materials and Applications, Gruppo Edit. Faenza Edit., Faenza (1995), Vol. 4, pp. 307–312.
29. R. A. Andrievskii, I. A. Bairamashvili, Yu. I. Soloev, and V. V. Khromonozhkin, “Sintered boron— production and properties. I. Investigation of the sintering of boron,” Powder Metall. Met. Ceram., 21, No. 8, 622–627 (1982).10.1007/BF00795516 ↗
30. R. A. Andrievskii, M. A. Leontiev, and A. V. Bragin, “Temperature dependence of compaction during sintering of silicon nitride,” Izv. AN SSSR. Neorg. Mater., 20, No. 12, 2055–2056 (1984).
31. R. A. Andrievskii, “On the temperature dependence of densification in sintering,” Sci. Sinter., 16, No. 1, 3–6 (1984).
32. R. A. Andrievskii, “Melting point and dissociation of Si3N4,” Int. J. Self. Prop. High Temp. Synthesis, 4, No. 3, 237–245 (1995).
33. V. I. Trefilov, Yu. V. Mol’man, and S. A. Firstov, Physical Basis for Strength of Refractory Metals [in Russian], Naukova Dumka, Kiev (1975), p. 315.
34. R. A. Andrievskii, “Role of the nature of the chemical bond and the dispersion in the formation of powder materials,” Powder Metall. Met. Ceram., 27, No. 8, 627–633 (1988).10.1007/BF00795549 ↗
35. R. A. Andrievskii, “Compaction and sintering of ultrafine powders,” Int. J. Powder Met., 30, No. 1, 59–66 (1994).
36. R. M. German, Sintering. Theory and Practice, Wiley and Sons, New York (1996).
37. A. V. Ragulya and V. V. Skorokhod, Consolidated Nanostructured Materials [in Russian], Naukova Dumka, Kiev (2007), 374.
38. M. I. Alymov, Powder Metallurgy of Nanocrystalline Materials [in Russian], Nauka, Moscow (2007), p. 169.
39. R. A. Andrievskii and I. M. Fedorchenko, “Effect of small additions of nickel and cobalt on the sintering of iron powder,” Izv. AN SSSR, OTN, Metall. Toplivo, No. 3, 50–54 (1961).
40. R. A. Andrievskii, V. V. Klimenko, and Yu. F. Khromov, “Self-diffusion of carbon in carbides of group IV and V transition metals,” Fiz. Met. Metalloved., 28, No. 298–303 (1969).
41. R. A. Andrievskii, Yu. F. Khromov, and I. S. Alekseeva, “Self-diffusion of carbon and metal atoms in zirconium carbides,” Fiz. Met. Metalloved., 32, No. 3, 664–667 (1971).
42. R. A. Andrievskii, I. I. Spivak, and A. E. Tsulin, “Effect of deviations from stoichiometric composition on diffusion-controlled processes in interstitial phases,” Dokl. AN SSSR, 185, No. 4, 792–794 (1969).
43. I. I. Spivak, R. A. Andrievskii, V. N. Rystsov, and V. V. Klimenko, “Creep of titanium monocarbide in its homogeneity range,” Powder Metall. Met. Ceram., 13, No. 7, 574–578 (1974).10.1007/BF00792566 ↗
44. R. A. Andrievskii, I. I. Spivak, and K. L. Chevasheva, “Effective self-diffusion coefficients in interstitial compounds,” Powder Metall. Met. Ceram., 7, No. 7, 559–562 (1968).10.1007/BF00774705 ↗
45. R. A. Andrievskii, “Thermodynamic approach to the analysis of diffusion-controlled processes in interstitial phases,” Powder Metall. Met. Ceram., 12, No. 2, 149–153 (1973).10.1007/BF00807780 ↗
46. R. A. Andrievskii, V. V. Khromonozhkin, E. A. Galkin, and V. I. Mitrofanov, “Studying the evaporation of uranium carbide, nitride, and carbonitride,” At. Énerg., 26, No. 6, 494–498 (1969).
47. R. A. Andrievskii, V. V. Khromonozhkin, Yu. F. Khromov, et al., “Partial thermodynamic properties of zirconium carbide over homogeneity range,” Dokl. AN SSSR, 206, No. 4, 896–898 (1972).
48. R. A. Andrievskii and Yu. F. Khromov, “Partial thermodynamic properties of titanium nitride,” Zh. Fiz. Khim., 57, No. 7, 1641–1644 (1983).
49. S. Sarian, “Self-diffusion in titanium carbide,” J. Appl. Phys., 40, 3515–3520 (1969).10.1063/1.1658229 ↗
50. R. A. Andrievskii and Ya. S. Umanskii, Interstitial Phases [in Russian], Nauka, Moscow (1977), p. 240.
51. R. A. Andrievskii, “Thermodynamics of ternary interstitial phases,” Zh. Fiz. Khim., 12, No. 3, 603–608 (1968).
52. K. P. Gurov and R. A. Andrievskii, “Diffusion theory of interstitial atoms in alloys,” Fiz. Met. Metalloved., 29, No. 4, 757–765 (1970).
53. É. M. Fedorov and R. A. Andrievskii, “Calculation of partial pressures in ternary refractory compounds,” Teplofiz. Vys. Temp., 11, No. 2, 419–422 (1973).
54. R. A. Andrievskii, A. G. Lanin, and G. A. Rymashevskii, Strength of Refractory Compounds [in Russian], Metallurgiya, Moscow (1974), p. 232.
55. C. Herring, “Diffusion in alloys,” J. Appl. Phys., 21, 437–442 (1950).10.1063/1.1699681 ↗
56. R. A. Andrievskii, I. I. Spivak, Yu. F. Khromov, and V. V. Khromonozhkin, “Research of partial thermodynamic and diffusion characteristics of some transition metal carbides,” in: Thermodynamics of Nuclear Materials, International Atomic Energy Agency, Vienna (1974), Vol. 1, pp. 409–414.
57. R. A. Andrievskii, V. V. Klimenko, V. I. Mitrofanov, and N. I. Poltoratskii, “Effect of structural vacancies in interstitial phases on their sintering shrinkage,” Powder Metall. Met. Ceram., 16, No. 6, 423–426 (1977).10.1007/BF00790792 ↗
58. R. A. Andrievskii, “Gas release in the sintering of powders,” in: Proc. 6th Int. Conf. Powder Metallurgy (BRNO‘1982), Kosize (1982), Vol. 1, 105–112.
59. R. A. Andrievskii, V. L. Kalikhman, and S. M. Solonin, “Effect of sintering temperature on shrinkage, structure and properties of briquettes made of chromium–nickel steel powders,” Izv. An SSSR. OTN. Metall. Gorn. Delo, No. 2, 104–111 (1963).
60. R. A. Andrievskii and S. M. Solonin, “Studying the sintering of chromium–nickel steel powder,” Izv. An SSSR. OTN. Metall. Gorn. Delo, No. 3, 32–39 (1964).
61. R. A. Andrievskii and N. K. Kasmamytov, “Effect of dispersion on sintering of dispersed powders of high- speed tool steel,” Powder Metall. Met. Ceram., 30, No. 10, 818–821 (1991).10.1007/BF00795847 ↗
62. R. A. Andrievskii and N. K. Kasmamytov, “Model sintering investigation of spherical high-speed steel powders,” Powder Metall. Int., 25, No. 6, 275–278 (1993).
63. R. A. Andrievskii, I. F. Baiman, and B. U. Usanov, “Temperature dependence of mechanical properties of titanium diboride–iron compositions,” Dokl. AN SSSR, 314, No. 5, 1130–1132 (1990).
64. R. A. Andrievskii, A. T. Pak, B. U. Asanov, et al., “Structure and physical-mechanical properties of high- density boride materials,” in: Proc. World Conf. Powder Metallurgy, Institute of Metals, London (1990), Vol. 3, pp. 163–165.
65. R. A. Andrievskii and I. F. Baiman, “Study of short-time creep of TiB2-Fe composites,” J. Mater. Sci. Let., 11, No. 24, 1661–1662 (1992).10.1007/BF00736200 ↗
66. V. P. Bulychev, R. A. Andrievskii, and L. B. Nevezhenko, “The sintering of zirconium carbide,” Powder Metall. Met. Ceram., 16, No. 4, 273–276 (1977).10.1007/BF00806128 ↗
67. R. A. Andrievskii, “Properties of sintered solids,” Powder Metall. Met. Ceram., 21, No. 1, 33–38 (1982).10.1007/BF00791722 ↗
68. V. V. Skorokhod and S. M. Solonin, Physical Metallurgy for the Sintering of Metal Powders [in Russian], Metallurgiya, Moscow (1984), p. 159.
69. M. J. Mayo, “Processing of nanocrystalline ceramics from ultrafine particles,” Int. Mater. Rev., 41, No. 3, 85–115 (1996).10.1179/imr.1996.41.3.85 ↗
70. E. A. Olevski, “Theory of sintering: from discrete to continuum,” Mater. Sci. Eng. R, 23, No. 2, 41–100 (1998).10.1016/S0927-796X(98)00009-6 ↗
71. Z. Z. Fang and H. Wang, “Densification and grain growth during sintering of nanosized particles,” Int. Mater. Rev., 53, No. 6, 326–352 (2008).10.1179/174328008X353538 ↗
72. H. Zhu and R. S. Averback, “Sintering processes of two nanoparticles: a study by molecular dynamics simulations,” Phil. Mag. Let., 73, No. 1, 27–33 (1996).10.1080/095008396181073 ↗
73. P. Zeng, S. Zajac, P. C. Clapp, and J. A. Rifkin, “Nanoparticle sintering simulations,” Mater. Sci. Eng. A, 252, 301–306 (1998).10.1016/S0921-5093(98)00665-0 ↗
74. H. Pan, S. H. Ko, and C. P. Grigoropoulos, “The solid-state neck growth mechanism in low energy laser sintering of gold nanoparticles: a molecular dynamics simulation study,” J. Heat Transfer, 130, No. 9, 092404 (1–7) (2008).
75. L. Ding, R. L. Davidchack, and J. Pan, “A molecular dynamics study of sintering between nanoparticles,” Comp. Mater. Sci., 45, 247–256 (2009).10.1016/j.commatsci.2008.09.021 ↗
76. R. A. Andrievskii and A. V. Khachoyan, “Role of size effects and interfaces in the physical and chemical properties of consolidated materials,” Ros. Khim. Zh., 53, No. 2, 4–14 (2009).
77. R. A. Andrievskii and A. M. Glezer, “Strength of nanostructures,” Usp. Fiz. Nauk, 178, No. 4, 337–358 (2009).10.3367/UFNr.0179.200904a.0337 ↗
78. M. Kusunoki, K. Yonemitsu, Y. Sasaki, and Y. Kubo, “In situ observation of zirconia particles at 1200°C by high-resolution electron microscopy,” J. Am. Ceram. Soc., 76, No. 3, 763–765 (1993).10.1111/j.1151-2916.1993.tb03674.x ↗
79. M. Yeadon, J. C. Yang, R. S. Averback, et al., “Sintering of silver and copper nanoparticles on (001) copper observed by in-situ ultrahigh vacuum transmission electron microscopy,” Nanostruct. Mater., 10, No. 5, 731–739 (1998).10.1016/S0965-9773(98)00111-1 ↗