journal article·2011-01

Phase states of Fe–Mo–C spinning alloys at high temperatures

T. A. Velikanova, M. V. Karpets, P. G. Agraval, M. A. Turchanin

Powder Metallurgy and Metal Ceramics· Volume 49· Issue 9-10
Publisher page

Abstract

Evolution of the phase composition of Fe–Mo–C spinning alloys is investigated in situ with hightemperature x-ray diffraction from room temperature to solidus. The temperature range over which the metastable β-Mn–like phase exists is determined. It is shown that the γ-Fe-based fcc-phase and Mo2C-based solid solution coexist in equilibrium at 1273 K and the γ-phase and η-carbointermetallide of W3Fe3C type coexist with the liquid phase at 1473 K. The vertical section at 11 at.% carbon is plotted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Microstructure and Mechanical Properties of Steels · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. G. V. Raynor and V. G. Rivlin, “Phase equilibria in iron ternary systems. 15. Critical evaluation of constitutions of certain ternary alloys containing iron, tungsten, and a third metal,” Int. Met. Rev., 28, No. 2, 122–129 (1983).
2. G. V. Raynor and V. G. Rivlin, “Phase equilibria in iron ternary systems. 15. Critical evaluation of ternary alloys of iron and molybdenum with cobalt, chromium, manganese and nickel,” Int. Met. Rev., 29, No. 5, 329–375 (1984).
3. T. Ya. Velikanova, M. Turchanin, T. Dobatkina, and T. A. Velikanova, “Carbon–iron–molybdenum,” in: Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology, W. Martinssen (ed.), New Series. Group IV: Physical Chemistry, G. Effenberg and S. Ilyenko (eds.), Ternary Alloy Systems, Phase Diagrams, Crystallographic and Thermodynamic Data Critically Evaluated by MSIT, Springer-Verlag, Berlin, Heidelberg (2008), Vol. 11D2, pp. 124–172.
4. A. Bondar, V. Ivanchenko, A. Kozlov, and J.-C. Tedenak, “Carbon–chromium–iron,” in: Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology, W. Martinssen (ed.), New Series. Group IV: Physical Chemistry, G. Effenberg and S. Ilyenko (eds.), Ternary Alloy Systems, Phase Diagrams, Crystallographic and Thermodynamic Data Critically Evaluated by MSIT, Springer-Verlag, Berlin, Heidelberg (2008), Vol. 11D2, pp. 1–55.
5. K. Kornienko, “Carbon–iron–tungsten,” in: Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology, W. Martinssen (ed.), New Series. Group IV: Physical Chemistry, G. Effenberg and S. Ilyenko (eds.), Ternary Alloy Systems, Phase Diagrams, Crystallographic and Thermodynamic Data Critically Evaluated by MSIT, Springer-Verlag, Berlin, Heidelberg (2008), Vol. 11D2, pp. 357–386.
6. A. Croupa, “Chromium–iron–molybdenum,” in: Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology, W. Martinssen (ed.), New Series. Group IV: Physical Chemistry, G. Effenberg and S. Ilyenko (eds.), Ternary Alloy Systems, Phase Diagrams, Crystallographic and Thermodynamic Data Critically Evaluated by MSIT, Springer-Verlag, Berlin, Heidelberg (2008), Vol. 11D3, pp. 106–126.
7. A. Inoue, T. Iwadachi, T. Minemur, et al., “Nonequilibrium phase in Fe–X–C (X = Cr, Mo or W) ternary alloys quenched rapidly from melts,” Trans. JIM, 22, No. 3, 197–209 (1981).10.2320/matertrans1960.22.197 ↗
8. S. Ya. Golub, V. A. Kotko, L. D. Kulak, et al., “New structural component of rapidly quenched tungsten–molybdenum steel,” Dokl. AN USSR, Ser. A, No. 6, 62–65 (1987).
9. A. Inoue, L. Arnberg, M. Oguchi, et al., “Preparation of Fe–Cr–Mo–C amorphous powders and microstructure and mechanical properties of their hot-pressed products,” Mat. Sci. Eng., 95, 101–114 (1987).10.1016/0025-5416(87)90502-7 ↗
10. S. A. Firstov, S. Ya. Golub, L. D. Kular, et al., “New metastable iron-based phase formed in ultrarapid crystallization of low-alloyed steels,” Fiz. Met. Metalloved., 65, No. 4, 772–775 (1988).
11. B. V. Haenko, S. Ya. Golub, T. A. Velikanova, et al., “Formation of phases with α- and β-Mn structure in iron-based alloys,” Fiz. Met. Metalloved., 75, No. 1, 123–130 (1993).
12. K. Kishitake, H. Era, and P. Li, “Nonequilibrium phases in rapidly solidified high-carbon Fe–Cr–Mo alloys,” Mat. Trans. JIM, 34, No. 1, 54–61 (1993).10.2320/matertrans1989.34.54 ↗
13. H. Herman (ed.), Ultrarapid Quenching of Liquid Alloys, Treatise on Material Science and Technology, Vol. 20, Academic Press, New York (1981).
14. A. March, “Mathematische Theorie der Regelung nach der Korngestalt bei affiner Deformation,” Z. Kristallogr., 81, 285–297 (1932).10.1524/zkri.1932.81.1.285 ↗
15. W. A. Dollase, “Correction of intensities for preferred orientation of the March model,” J. Appl. Cryst., 19, 267–272 (1986).10.1107/S0021889886089458 ↗
16. G. E. R. Schultze, Metallphysik, Akademie-Verlag, Berlin (1967).
17. C. B. Shoemaker, D. P. Shoemaker, T. E. Hopkins, and S. Yindepit, “Refinement of the structure of betamanganese and of a related phase in the Mn–Ni–Si system,” Acta Cryst., B34, 3573–3576 (1978).10.1107/S0567740878011620 ↗
18. K. Kuo, “The formation of eta carbides,” Acta Met., 1, 301–304 (1953).10.1016/0001-6160(53)90103-5 ↗
19. E. Rudy, S. Windisch, A. J. Stosick, et al., “The constitution of binary molybdenum–carbon alloys,” Trans. Met. Soc. AIME, 239, No. 8, 1247–1267 (1967).
20. M. Rapposch, E. Kostiner, S. F. Wayne, and H. Nowotny, “The crystal structure of the molybdenum cementite Mo12Fe22C10 (ξ-phase),” Monatsh. Chemie, 116, No. 11, 1237–1245 (1985).10.1007/BF00811096 ↗
21. T. A. Velikanova and N. A. Graivoronskii, “Electron microscopy of rapidly quenched Fe–Mo–C alloys containing metastable carbon intermetallics,” in: Carbides and Materials on Their Basis [in Russian], Inst. Probl. Materialoved. NAN Ukrainy, Kiev (1995), pp. 162–168.
22. J.-O. Andersson, “A thermodynamic evaluation of the Fe–Mo–C system,” CALPHAD, 12, No. 1, 9–23 (1988).10.1016/0364-5916(88)90025-9 ↗
23. N. Saunders and A. P. Miodownik, CALPHAD (Calculation of Phase Diagrams), Pergamon Materials Series, Vol. 1, Elsevier Science, Oxford (1998), p. 496.
24. Thermo-Calc: Users Guide, Foundation of Computational Thermodynamics, Stockholm, Sweden (2004), p. 584.
25. J. C. Schuster, H. Nowotny, H. Ipser, and H. Gupta, “The constitution of the ternary system iron–molybdenum–carbon,” Z. Metallkund., 82, No. 7, 539–543 (1991).