journal article·2021-05

Clad TiCrC(Ni) Composite Powders for Thermal Spraying of Coatings

M. S. Storozhenko, O. P. Umanskyi, G. A. Baglyuk, Yu. I. Evdokimenko, V. P. Brazhevskyi, O. O. Chernyshov, O. A. Bondarenko, I. S. Martsenyuk, V. B. Tarelnyk, O. Ye. Terentiev, O. V. Melnyk

Powder Metallurgy and Metal Ceramics· Volume 60· Issue 1-2
Publisher page

Abstract

The carbonyl cladding method was employed to produce metal–ceramic TiCrC(Ni) composite powders from double titanium–chromium carbide with 17, 25, and 33 wt.% Ni. To deposit coatings through the plasma, detonation, and high-velocity oxygen fuel spray processes, powder materials of different size fractions, μm, were produced: −80+40, −63+40, and −40+20, respectively. The composite TiCrC(Ni) powder particles were of irregular shape and consisted of a refractory core with 18–26 GPa microhardness, surrounded by a ductile nickel layer. Electron microprobe analysis revealed that the ceramic core included two phases: main TiCrC phase and interspersed Cr7C3 phase. The nickel layer deposited on the titanium–chromium carbide particles became thicker with higher nickel content of the TiCrC(Ni) composite powders and varied from 0.5 to 4 μm. The effect of nickel content on the service properties (apparent density and flowability) of the developed powders was determined. The apparent density of the TiCrC(Ni) powders was not found to substantially depend on their particle size or nickel content and was 2.3–2.6 g/cm3 on average. The flowability of the TiCrC(Ni) powders was found to depend on their particle size and nickel content. The flowability of the TiCrC(Ni) powders improved with increasing particle size and was 41.2–51.4 sec for the −63+40 μm powders and 40.2–47.0 sec for the −80+40 μm powders. The −40+20 μm TiCrC(Ni) powders for oxygen fuel spraying had very poor flowability and thus could be used only for coating deposition units with forced powder supply to the spray area. Their flowability became higher with nickel content of the TiCrC(Ni) composite powders increasing from 17 to 33.5 wt.%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Nuria Espallargas (ed.), Future Development of Thermal Spray Coatings: Types, Designs, Manufacture and Applications, 1st ed., Woodhead Publishing, Trondheim (2015), p. 300.10.1016/B978-0-85709-769-9.00001-4 ↗
2. Global Thermal Spray Market-Growth, Trends, and Forecasts (2020–2025), URL: https://www.mordorintelligence.com/i.
3. Yu.A. Kharlamov and L.G. Polonskii, “Thermal spraying. Current state and development prospects,” Visn. Skhidnoukr. Nats. Univ. Dala, No. 2, 5–9 (2016).
4. Yu.S. Borisov, Yu.A. Kharlamov, S.A. Sidorenko, and E.N. Arbatovska, Thermally Sprayed Coatings from Powder Materials: Handbook [in Russian], Tekhnika, Kyiv (1987), p. 544.
5. L. Berger, “Application of hardmetals as thermal spray coatings,” Int. J. Refract. Met. Hard Mater., 49, 350–364 (2015).10.1016/j.ijrmhm.2014.09.029 ↗
6. G. Bolelli, A. Colella, L. Lusvarghi, S. Morelli, P. Puddu, E. Righetti, P. Sassatelli, and V. Testa, “TiC–NiCr thermal spray coatings as an alternative to WC–CoCr and Cr3C2–NiCr,” Wear, 450–451, No. 203273 (2020), DOI: https://doi.org/https://doi.org/10.1016/j.wear.2020.203273.10.1016/j.wear.2020.203273 ↗
7. M.S. Storozhenko, A.P. Umanskii, A.V. Lavrenko, S.S. Chuprov, and A.D. Kostenko, “Composites based on TiB2–SiC with a nickel–chromium matrix,” Powder Metall. Met. Ceram., 50, No. 11–12, 719–725 (2012).10.1007/s11106-012-9381-x ↗
8. A. Panasyuk, A. Umanskyi, M. Storozhenko, and V. Akopyan, “Development of TiB2-based cermets with Fe–Mo binder,” Key Eng. Mater., 527, 9–13 (2013), DOI: https://doi.org/https://doi.org/10.4028/www.scientific.net/kem.527.9.10.4028/www.scientific.net/kem.527.9 ↗
9. M.S. Storozhenko, A.P. Umanskii, A.E. Terentiev, and I.M. Zakiev, “Effect of the structure of TiB2–(Fe–Mo) plasma coatings on mechanical and tribotechnical properties,” Powder Metall. Met. Ceram., 56, No. 1–2, 60–69 (2017).10.1007/s11106-017-9872-x ↗
10. M.A. Jones, A.J. Horlock, P.H. Shipway, and D.G. McCartney, “Comparison of the abrasive wear behavior of HVOF-sprayed titanium carbide- and titanium boride-based cermet coatings,” Wear, 251, 1009–1016 (2001).10.1016/S0043-1648(01)00702-5 ↗
11. S. Matthews, M. Bhagvandas, and M. Berger, “Creation of modified Cr3C2–NiCr hardmetal coating microstructures through novel processing,” J. Alloys Compd., 824, No. 153868 (2020).10.1016/j.jallcom.2020.153868 ↗
12. L. Pavlowski, The Science and Engineering of Thermal Spray Coatings, John Willey & Sons, Chichester (2008), p. 626.10.1002/9780470754085 ↗
13. Zhu Hong-Bin, Hui Li, Hai-Xin Yang, and Zhuo-Xin, “Microstructure and sliding wear performance of plasma-sprayed TiB2–Ni coating deposited from agglomerated and sintered powder,” J. Therm. Spray Technol., 22, 1310–1319 (2001).10.1007/s11666-013-0015-8 ↗
14. X. Chen, H.-T. Wang, Ji Gang-Chang, X.-B. Bai, and Y.W. Wang, “Influence of binder phase content on the microstructure and properties of HVOF-sprayed TiB2–Ni coatings,” J. Mater. Eng., No. 3, 34–40 (2014).
15. O. Umanskyi, M. Storozhenko, M. Antonov, O. Terentyev, O. Koval, and D. Goljandin, “Effect of thermal spraying method on the microstructure and wear behavior of FeNiCrBSiC–CrB2 coating,” Key Eng. Mater., 799, 37–42 (2019), DOI: https://doi.org/https://doi.org/10.4028/www.scientific.net/kem.799.37.10.4028/www.scientific.net/kem.799.37 ↗
16. Kuiying Chen and Linruo Zhao, “Elastic properties, thermal expansion coefficients and electronic structures of Ti0.75X0.25C carbides,” J. Phys. Chem. Solids, 68, 1805–1811 (2007).10.1016/j.jpcs.2007.05.008 ↗
17. A.P. Umanskii, V.A. Lavrenko, S.S. Chuprov, and V.P. Konoval, “High-temperature oxidation of composites based on titanium carbonitride and double titanium–chromium carbide,” Nov. Ogneup., No. 8, 42–46 (2006).
18. A.P. Umanskii, V.P. Konoval, A.D. Panasyuk, I.A. Podchernyaeva, V.V. Malyshkin, and V.A. Kralya, “Plasma coatings of TiCrC–FeCr composite powder alloys: Structure and properties,” Powder Metall. Met. Ceram., 46, No. 3–4, 133–138 (2007).10.1007/s11106-007-0022-8 ↗
19. A.G. Merzhanov, Combustion Processes and Synthesis of Materials [in Russian], Inst. Strukt. Makrokin. Probl. Matrialoved. Merzhanova, Chernogolovka (1998), p. 512.