journal article·2016-11

Influence of Titanium and Iron Additives to Magnesium on Hydrogen-Sorption Properties, Thermal Stability, and Kinetics of Hydrogen Desorption from MgH2 Phase of Mechanical Alloy

V. D. Dobrovolsky, O. G. Ershova, Yu. M. Solonin, O. Yu. Khyzhun

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 7-8
Publisher page

Abstract

We report on studies of the process of cyclic hydriding–dehydriding (eight cycles) of a mechanical alloy synthesized in a ball mill by grinding powder mixture Mg + 10 wt.% TiH2 + 10 wt.% Fe in argon medium. Hydrogen-sorption properties and thermal stability of the mechanical alloy are studied employing thermodesorption spectroscopy at hydrogen pressure of 0.1 MPa. Hydrogen capacity of the mechanical alloy is determined to be 4.9 wt.%, and onset temperature of hydrogen desorption from the alloy under this study equals 220°C. Kinetics of the process of hydrogen desorption from the hydride phases of the mechanical alloy is examined. The present studies have revealed that mechanical treatment of the magnesium powder in Ar medium with both Fe and Ti additives causes a greater effect on improving the kinetics of hydrogen desorption from hydride phase MgH2 of the alloy and decreasing its thermal stability in comparison with that caused by mechanical treatment of the same powder with either Fe or Ti additives in hydrogen medium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Ammonia Synthesis and Nitrogen Reduction · Hybrid Renewable Energy Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. X. L. Wang, J. P. Tu, P. L. Zhang, et al., “Hydrogenation properties of ball-milled MgH2–10 wt.% Mg17Al12 composite,” Int. J. Hydrogen Energy, 32, 3406–3410 (2007).10.1016/j.ijhydene.2007.03.003 ↗
2. V. D. Dobrovolsky, O. G. Ershova, V. Paul-Boncour, et al., “The influence of TiB2 upon thermal stability of a hydride phase of the Mg-based mechanical alloy,” J. All. Compd., 465, 177–182 (2008).10.1016/j.jallcom.2007.10.125 ↗
3. S. Agarwal, A. Aurora, and A. Jain, “Catalytic effect of ZrCrNi alloy on hydriding properties of MgH2,” Int. J. Hydrogen Energy., 34, 9157–9162 (2009).10.1016/j.ijhydene.2009.09.034 ↗
4. D. M. Liu, C. H. Fang, and Q. A. Zhang, “Hydrogen storage properties of MgH2–(Sr,Ca)2AlH7 composite,” J. All. Compd., 485, 391–395 (2009).10.1016/j.jallcom.2009.05.114 ↗
5. R. A. Varin, T. Czujko, Ch. Chiu, et al., “Synthesis of nanocomposite hydrides for solid-state hydrogen storage by controlled mechanical milling techniques,” J. All. Compd., 483, 252–255 (2009).10.1016/j.jallcom.2008.07.207 ↗
6. J. F. Mao, X. B. Yu, Z. P. Guo, et al., “Enhanced hydrogen storage performances of NaBH4–MgH2 system,” J. All. Compd., 479, 619–623 (2009).10.1016/j.jallcom.2009.01.012 ↗
7. S. T. Sabitu, G. Gallo, and A. J. Goudy, “Effect of TiH2 and Mg2Ni additives on the hydrogen storage properties of magnesium hydride,” J. All. Compd., 499, 35–38 (2010).10.1016/j.jallcom.2010.03.128 ↗
8. Tian Mi and Shang Congxiao, “Nanostructured MgH2 catalyzed by TiC nanoparticles for hydrogen storage,” J. Chem. Technol. Biotechnol., 86, 69–74 (2011).10.1002/jctb.2479 ↗
9. Nafiseh Mahmoudi, A. Kaflou, and A. Simchi, “Hydrogen desorption properties of MgH2–TiCr1.2Fe0.6 nanocomposite prepared by high-energy mechanical alloying,” J. Power Sources., 196, 4604–4608 (2011).10.1016/j.jpowsour.2011.01.001 ↗
10. M. G. Veron, A. M. Condo, and F. C. Gennari, “Effective synthesis of Mg2CoH5 by reactive mechanical milling and its hydrogen sorption behavior after cycling,” Int. J. Hydrogen Energy., 38, 973–981 (2013).10.1016/j.ijhydene.2012.10.086 ↗
11. E. Ivanov and I. Konstanchuk, “Magnesium mechanical alloys—new materials for hydrogen energy,” Dokl. Akad. Nauk SSSR, 286, 385 (1986).
12. E. Ivanov, I. Konstanchuk, A. Stepanov, et al., “Magnesium mechanical alloys for hydrogen storage,” J. Less-Common Met., 131, 25–29 (1987).10.1016/0022-5088(87)90497-8 ↗
13. H. Imamura, N. Sakasai, and Y. Kaji, “Hydrogen absorption of Mg-based composites prepared by mechanical milling: Factors affecting its characteristics,” J. All. Compd., 232, 218–223 (1996).10.1016/0925-8388(95)01882-4 ↗
14. H. Imamura, N. Sakasai, and T. Fujinaga, “Characterization and hydriding properties of Mg–graphite composites prepared by mechanical grinding as new hydrogen storage materials,” J. All. Compd., 253–254, 34–37 (1997).10.1016/S0925-8388(96)03074-5 ↗
15. G. Liang, J. Huot, and S. Boily, “Catalytic effect of transition metals on hydrogen sorption in nanocrystalline ball milled MgH2–TM (TM = Ti, V, Mn, Fe, Ni) systems,” 292, 247–252 (1999).
16. A. Zaluska, L. Zaluski, and J. O. Strom-Olsen, “Nanocrystalline magnesium for hydrogen storage,” J. All. Compd., 288, 217–225 (1999).10.1016/S0925-8388(99)00073-0 ↗
17. J. Huot, G. Liang, and R. Schulz, “Mechanically alloyed metal hydride systems,” Appl. Phys. A., 72, 187–195 (2001).10.1007/s003390100772 ↗
18. W. Oelerich, T. Klassen, and R. Borman, “Metal oxides as catalysts for improved hydrogen sorption in nanocrystalline Mg-based materials,” J. All. Compd., 315, 237–242 (2001).10.1016/S0925-8388(00)01284-6 ↗
19. M. Y. Song, “Hydriding kinetics of a mechanically alloyed mixture Mg–10 wt.% Ni,” Int. J. Hydrogen Energy, 28, 403 (2003).10.1016/S0360-3199(02)00133-7 ↗
20. Z. Degouche, J. Goyette, T. K. Bose, et al., “Moisture effect on hydrogen storage properties of nanostructured MgH2–V–Ti composite,” 28, 983–988 (2003).
21. J. Huot, J. F. Pelletier, L. B. Lurio, et al., “Investigation of dehydrogenation mechanism of MgH2–Nb nanocomposites,” J. All. Compd., 348, 319–324 (2003).10.1016/S0925-8388(02)00839-3 ↗
22. G. Barkhordarian, T. Klasen, and R. Borman, “Effect of Nb2O5 content on hydrogen reaction kinetics of Mg,” J. All. Compd., 364, 242–246 (2004).10.1016/S0925-8388(03)00530-9 ↗
23. J. Bystrzycki, T. Czujko, and R. A. Varin, “Processing by controlled mechanical milling of nanocomposite powders Mg+X (X = Co, Cr, Mo, V, Y, Zr) and their hydrogenation properties,” J. All. Compd., 404–406, 507–510 (2005).10.1016/j.jallcom.2004.10.094 ↗
24. A. Ming, “Hydrogen storage properties of magnesium based nanostructured composite materials,” Mater. Sci. Eng. B., 117, 37–44 (2005).10.1016/j.mseb.2004.10.017 ↗
25. A. Bassetti, E. Bonetti, L. Pasquini, et al., “Hydrogen desorption from ball milled MgH2 catalyzed with Fe,” Eur. Phys. J. B., 43, 19–27 (2005).10.1140/epjb/e2005-00023-9 ↗
26. S. Deledda, A. Borissova, C. Poinsignonon, et al., “H-sorption in MgH2 nanocomposites containing Fe or Ni with fluorine,” J. All. Compd., 404, 409–412 (2005).10.1016/j.jallcom.2005.01.115 ↗
27. T. R. Jensen, A. Andreasen, T. Vegge, et al. “Dehydrogenation kinetics of pure and nickel-doped magnesium hydride investigated by in situ time-resolved powder X-ray diffraction,” Int. J. Hydrogen Energy, 31, 2052–2062 (2006).10.1016/j.ijhydene.2006.02.004 ↗
28. X. Lei, L. Yang, X. Zhang, et al., “Catalytic effect of Ni nanoparticles on the desorption kinetics of MgH2 nanoparticles,” J. All. Compd., 482, 388–392 (2009).10.1016/j.jallcom.2009.04.028 ↗
29. R. A. Varin, T. Czujko, Z. S. Wronski, “Thermal stability of Vale Inco nanometric nickel as a catalytic additive for magnesium hydride (MgH2),” Int. J. Hydrogen Energy, 34, 8603–8610 (2009).10.1016/j.ijhydene.2009.07.110 ↗
30. H. Imamura, K. Tanaka, I. Kitazawa, T. Sumi, “Hydrogen storage properties of nanocrystalline MgH2 and MgH2/Sn nanocomposite synthesized by ball milling,” J. All. Compd., 484, 939–942 (2009).10.1016/j.jallcom.2009.05.072 ↗
31. M. Polanski and J. Bystrzycki, “Comparative studies of the influence of different nanosized metal oxides on the hydrogen sorption properties of magnesium hydride,” J. All. Compd., 486, 697–701 (2009).10.1016/j.jallcom.2009.07.042 ↗
32. A. Patah, A. Takasaki, and J. S. Szmyd, “Influence of multiple oxide (Cr2O3/Nb2O5) addition on the sorption kinetics of MgH2,” Int. J. Hydrogen Energy, 34, 3032–3037 (2009).10.1016/j.ijhydene.2009.01.086 ↗
33. L. P. Ma, X. D. Kang, H. B. Dai, et al., “Superior catalytic effect of TiF3 over TiCl3 in improving the hydrogen sorption kinetics of MgH2: Catalytic role of fluorine anion,” Acta Mater., 57, 2250–2258 (2009).10.1016/j.actamat.2009.01.025 ↗
34. Suwarno Hadi, Analysis of the Fe–Ti and Mg–Ti–Fe alloys prepared by high energy ball milling and their hydrogen capacity, Adv. Mater. Res., 277, 129–136 (2011).10.4028/www.scientific.net/AMR.277.129 ↗
35. Xuanli Luo, D. M. Grant, and G. S. Walker, “Hydrogen storage properties of nanostructured 0.65MgH2/0.35ScH2,” Int. J. Hydrogen Energy, 38, 153–161 (2013).10.1016/j.ijhydene.2012.10.025 ↗
36. Y. Chen and J. S. Williams, “Formation of metal hydrides by mechanical alloying,” J. All. Compd., 217, 181–184 (1995).10.1016/0925-8388(94)01338-1 ↗
37. J.-L. Bobet, E. Akiba, and B. Darriet, “Study of Mg–M (M = Co, Ni, Fe) mixture elaborated by reactive mechanical alloying hydrogen sorption properties,” Int. J. Hydrogen Energy, 26, 493–501 (2001).10.1016/S0360-3199(00)00082-3 ↗
38. P. Delchev, P. Solsona, B. Drenchev, et al., “Direct hydriding of Mg87Al7Ni3Mn3 by reactive mechanical milling in hydrogen atmosphere and influence of particle size on the dehydriding reaction,” J. All. Compd., 388, 98–103 (2005).10.1016/j.jallcom.2004.07.001 ↗
39. T. Spassov, V. Rangelova, P. Solsona, et al., “Hydriding/dehydriding properties of nanocrystalline Mg87Ni3Al3M7 (M = Ti, Mn, Ce, La) alloys prepared by ball milling,” J. All. Compd., 398, 139–144 (2005).10.1016/j.jallcom.2005.02.035 ↗
40. O. G. Ershova, V. D. Dobrovolsky, Y. M. Solonin, et al., “Influence of Ti, Mn, Fe, Ni addition upon thermal stability & decomposition temperature of the MgH2 phase of alloys synthesized by reactive mechanical alloys,” J. All. Compd., 464, 212–218 (2008).10.1016/j.jallcom.2007.10.064 ↗
41. V. D. Dobrovolsky, O. G. Ershova, Y. M. Solonin, et al., “Thermal stability and H-desorption properties of Mg3MnNi2H x prepared by reactive mechanical alloying of powders Mg, Mn, Ni in H2 atmosphere,” in: Carbon Nanomaterials in Clean Energy Hydrogen Systems, The NATO Science for Peace and Security Program, Springer (2008), pp. 467–472.
42. J. F. Stampfer, C. E. Holley, and J. F. Suttle, “The magnesium–hydrogen system,” J. Am. Chem. Soc., 82, 3504–3508 (1960).10.1021/ja01499a006 ↗
43. K. Zeng, T. Klassen, W. Oelerich, et al., “Critical assessment and thermodynamic modeling of the Mg–H system,” Int. J. Hydrogen Energy, 24, 989–1004 (1999).10.1016/S0360-3199(98)00132-3 ↗
44. C. X. Shang, M. Bououdina, Y. Song, et al., “Effect of carbon on hydrogen desorption and absorption of mechanically milled MgH2,” J. Power Source, 129, 73–80 (2004).10.1016/j.jpowsour.2003.11.013 ↗
45. M. Tanniru, D. K. Slattery, and F. Ebrahimi, “A study of stability of MgH2 in Mg–8 at.% Al alloy powder,” Int. J. Hydrogen Energy, 35, 3555–3564 (2010).10.1016/j.ijhydene.2010.01.109 ↗
46. M. Tanniru, D. K. Slattery, and F. Ebrahimi, “A study of phase transformation during the development of pressure–composition isotherms for electrodeposited Mg–Al alloys,” Int. J. Hydrogen Energy, 36, 639–647 (2011).10.1016/j.ijhydene.2010.09.083 ↗
47. C. Zhou, Z. Z. Fang, J. Lu, et al., “Thermodynamic destabilization of magnesium hydride using Mg-based solid solution alloys,” J. Phys. Chem. C, 118, 11526–11535 (2014).10.1021/jp501306w ↗
48. Miwa K. Thermodynamical stability of complex transition metal hydrides M2FeH6 / K. Miwa, S. Takagi, M. Matsuo, et al. // J. Phys. Chem. C, 117, 8014–8019 (2013).10.1021/jp3122159 ↗
49. J. J. Didisheim, P. Zolliker, K. Yvon, et al., “Dimagnesium iron (II) hydride, Mg2FeH6, containing octahedral FeH6 4– anions,” Inorg. Chem., 23, 1953–1957 (1984).10.1021/ic00181a032 ↗
50. I. Konstanchuk, E. Ivanov, M. Pezat, et al., “The hydriding properties of a mechanical alloy with composition Mg–25% Fe,” J. Less-Common Met., 131, 181–189 (1987).10.1016/0022-5088(87)90516-9 ↗