Directionally solidified eutectics in the Al2O3–ZrO2–Ln(Y)2O3 systems (Review)
Source abstract
Abstract
The current status of research on high-temperature composite oxide ceramics in the Al2O3–ZrO2–Ln2O3 systems (Ln are lanthanides, Y) is reviewed. It is emphasized that their use as structural materials at high temperatures (up to 1650°C) is promising. Conditions for growing binary and ternary eutectic composites and their properties are described. Weak and strong aspects of these materials are pointed out. The role of phase diagrams in developing high-temperature in situ composites is shown.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. V. Kurts and P. R. Zam, Directional Solidification of Eutectic Materials [in Russian], Metallurgiya, Moscow (1980), p. 272.
2. Y. Waku, S. Sakata, A. Mitani, et al., “Temperature dependence of flexural strength and microstructure of Al2O3–Y3Al5O12–ZrO2 ternary melt growth composites,” J. Mater. Sci., 37, No. 14, 2975–2982 (2002).10.1023/A:1016073115264 ↗
3. Y. Waku, “A new ceramic eutectic composite with high strength at 1873 K,” Adv. Mater., 10, No. 5, 615–617 (1998).10.1002/(SICI)1521-4095(199805)10:8<615::AID-ADMA615>3.0.CO;2-T ↗
4. J.-M. Yang and X. Q. Zhu, “Thermo-mechanical stability of directionally solidified Al2O3–ZrO2(Y2O3) eutectic fibers,” Scripta Mater., 36, No. 9, 961–966 (1997).10.1016/S1359-6462(96)00472-1 ↗
5. J. A. DiCarlo, “Creep limitations of current polycrystalline ceramic fibers,” Comp. Sci. Technol., 51, No. 2, 213–222 (1994).10.1016/0266-3538(94)90191-0 ↗
6. J. T. A. Pollok, “Filamentary sapphire. Part 2. Growth and microstructural characterization,” J. Mater. Sci., 7, No. 6, 631–648 (1972).10.1007/BF00549375 ↗
7. A. Newcomb, “Slow crack growth in sapphire fibers at 800 to 1500°C,” J. Am. Ceram. Soc., 76, No. 10, 2505–2512 (1993).10.1111/j.1151-2916.1993.tb03973.x ↗
8. H. E. Bates, “EFG growth of alumina–zirconia eutectic fiber,” Ceram. Eng. Sci. Proc., 13, No. 7–8, 190–197 (1992).
9. E. L. Courtright, J. S. Haggerty, and J. Sigalovsky, “Controlling microstructures in ZrO2(Y2O3)–Al2O3 eutectic fibers,” Ceram. Eng. Sci. Proc., 14, No. 7–8, 671–681 (1993).10.1002/9780470314180.ch92 ↗
10. S. C. Farmer, A. Sayir, and P. O. Dickerson, “Mechanical and microstructural characterization of directionally solidified alumina–zirconia eutectic fibers,” in: Proc. Symp. in situ Composites: Science and Technology (October 17–21, 1993), Pennsylvania, Pittsburg (1993), pp. 167–182.
11. T. Mah, T. A. Parthasarathy, M. D. Petry, and L. F. Matson, “Processing, microstructure and properties of Al2O3–Y3Al5O12 (YAG) eutectic fibers,” Ceram. Eng. Sci. Proc., No. 7–8, 622–638 (1993).10.1002/9780470314180.ch88 ↗
12. R. L. Ashbrook, “Directionally solidified ceramic eutectics,” J. Am. Ceram. Soc., 60, No. 9–10, 428–435 (1977).10.1111/j.1151-2916.1977.tb15527.x ↗
13. V. S. Stubican and R. C. Bradt, “Eutectic solidification in ceramic system,” Ann. Rev. Mater. Sci., 11, 267–297 (1981).10.1146/annurev.ms.11.080181.001411 ↗
14. S. M. Lakiza, “Directional solidification of eutectics: new prospects for refractory oxide ceramics (review),” Powder Metall. Met. Ceram., 28, No. 8, 637–646 (1989).10.1007/BF00794581 ↗
15. J. Llorca and V. M. Orera, “Directionally solidified eutectic ceramic oxides,” Progr. Mater. Sci., 51, 711–809 (2006).10.1016/j.pmatsci.2005.10.002 ↗
16. I. A. Bondar’, L. N. Koroleva, and E. T. Bezruk, “Physical and chemical properties of yttrium aluminates and gallates,” Izv. AN SSSR, Neorg. Mater., 20, No. 2, 257–261 (1984).
17. T. A. Parthasarathy, T. Mah, and K. Keller, “Creep mechanism of polycrystalline yttrium aluminum garnet,” J. Am. Ceram. Soc., 75, No. 7, 1756–1759 (1992).10.1111/j.1151-2916.1992.tb07193.x ↗
18. S. Karato, Z. Wang, and K. Fujino, “High-temperature creep of yttrium–aluminum garnet single crystals,” J. Mater. Sci., 29, 6458–6462 (1994).10.1007/BF00354004 ↗
19. J. Wolfenstine, “Elevated temperature deformation of single crystal Y3Al5O12,” Scripta Mater., 38, No. 6, 965–968 (1998).10.1016/S1359-6462(97)00565-4 ↗
20. S. M. Lakiza, L. M. Lopato, and A. V. Shevchenko, “Interactions in the Al2O3–ZrO2–Y2O3 system,” Powder Metall. Met. Ceram., 33, No. 9–10, 486–490 (1995).10.1007/BF00559534 ↗
21. S. M. Lakiza and L. M. Lopato, “Stable and metastable phase relations in the system alumina–zirconia–yttria,” J. Am. Ceram. Soc., 80, No. 4, 893–902 (1997).10.1111/j.1151-2916.1997.tb02919.x ↗
22. L. Mazerolles, D. Michel, Y. Perez, and M. Jorba, “Microstructure and related properties of oriented eutectics involving refractory oxides,” in: Proc. Sec. Europ. Conf., Stud. Inorg. Chem., Sol. State Chem., 3, Veldhoven, The Netherlands (June 7–9, 1982), pp. 841–844.
23. L. Mazerolles, D. Michel, and R. Portier, “Interfaces in oriented Al2O3–ZrO2(Y2O3) eutectics,” J. Am. Ceram. Soc., 69, No. 3, 252–255 (1986).10.1111/j.1151-2916.1986.tb07419.x ↗
24. L. Mazerolles, D. Michel, M. Cornier, and R. Portier, “Interfaces between zirconia and refractory oxides,” Sci. Techn. Zirconia III, Adv. Ceram., 24A, 471–478 (1988).
25. V. A. Borodin, A. G. Reznikov, M. Yu. Starostin, et al., “Growth of Al2O3–ZrO2(Y2O3) eutectic composite by Stepanov technique,” J. Cryst. Growth, 82, No. 1–2, 177–181 (1987).10.1016/0022-0248(87)90183-7 ↗
26. V. A. Borodin, M. Yu. Starostin, and T. N. Yalovets, “Structure and related properties of shaped eutectic Al2O3–ZrO2 (Y2O3) composites,” J. Cryst. Growth, 104, No. 1, 148–153 (1990).10.1016/0022-0248(90)90324-E ↗
27. M. Yu. Starostin, V. A. Gnesin, and T. N. Yalovets, “Microstructure and crystallographic phase textures of the alumina–zirconia eutectics,” J. Cryst. Growth, 171, No. 1–2, 119–124 (1997).10.1016/S0022-0248(96)00460-5 ↗
28. J. Echigoya, Y. Takabayashi, H. Suto, and M. Ishigame, “Structure and crystallography of directionally solidified Al2O3–ZrO2–Y2O3 eutectic by the floating zone melting method,” J. Mater. Sci. Lett., 5, No. 2, 150–152 (1986).10.1007/BF01672029 ↗
29. J. Echigoya, Y. Takabayashi, and H. Suto, “Hardness and fracture toughness of directionally solidified Al2O3–ZrO2(Y2O3) eutectics,” J. Mater. Sci. Lett., 5, No. 2, 153–154 (1986).10.1007/BF01672030 ↗
30. A. Sayir, S. C. Farmer, P. O. Dickerson, and H. M. Yun, “High temperature mechanical properties of Al2O3/ZrO2(Y2O3) fibers,” in: Proc. Symp. Mater. Res. Soc., Ceram. Matrix Compos., Adv. High-Temper. Struct. Mater. (November 28–December 2, 1994, Boston, Mas.), Vol. 365, Boston (1994), pp. 21–27.
31. S. C. Farmer and A. Sayir, “Al2O3/ZrO2 cellular fibers,” Ceram. Eng. Sci. Proc., No. 7–8, 1101–1105 (1995).10.1002/9780470314784.ch55 ↗
32. J. A. Pardo, R. I. Merino, V. M. Orera, et al., “Piezospectroscopic study of residual stresses in Al2O3–ZrO2 directionally solidified eutectics,” J. Am. Ceram. Soc., 83, No. 11, 2745–2752 (2000).10.1111/j.1151-2916.2000.tb01626.x ↗
33. A. Sayir and S. C. Farmer, “The effect of the microstructure on mechanical properties of directionally solidified Al2O3/ZrO2(Y2O3) eutectic,” Acta Mater., 48, No. 18–19, 4691–4697 (2000).10.1016/S1359-6454(00)00259-7 ↗
34. A. S. Argon, J. Yi, and A. Sayir, “Creep resistance of directionally solidified ceramic eutectics of Al2O3/c-ZrO2 with sub-micron columnar morphologies,” Mater. Sci. Eng. A, 319–321, 838–842 (2001).10.1016/S0921-5093(00)02033-5 ↗
35. J. Y. Pastor, P. Roza, J. Llorca, et al., “Mechanical properties of directionally solidified Al2O3–ZrO2(Y2O3) eutectics,” Mater. Sci. Eng. A, A308, No. 1–2, 241–249 (2001).10.1016/S0921-5093(00)02040-2 ↗
36. S. C. Farmer and A. Sayir, “Tensile strength and microstructure of Al2O3–ZrO2 hypo-eutectic fibers,” Eng. Fract. Mech., 9, No. 9, 1015–1024 (2002).10.1016/S0013-7944(01)00118-7 ↗
37. R. I. Merino, J. I. Pena, N. R. Harlan, et al., “Phase distribution, residual stresses and mechanical properties of melt grown Al2O3–ZrO2 (Y2O3) eutectics,” Ceram. Eng. Sci. Proc., A23, No. 3, 663–670 (2002).10.1002/9780470294741.ch77 ↗
38. N. R. Harlan, R. I. Merino, J. I. Pena, et al., “Phase distribution and residual stresses in melt-grown Al2O3–ZrO2(Y2O3) eutectics,” J. Am. Ceram. Soc., 85, No. 8, 2025–2032 (2002).10.1111/j.1151-2916.2002.tb00399.x ↗
39. J. I. Pena, R. I. Merino, N. R. Harlan, et al., “Microstructure of Y2O3 doped Al2O3–ZrO2 eutectics grown by the laser floating zone method,” J. Europ. Ceram. Soc., 22, No. 14–15, 2595–2602 (2002).10.1016/S0955-2219(02)00121-8 ↗
40. J. Llorca, J. Y. Pastor, P. Poza, et al., “Influence of the Y2O3 content and temperature on the mechanical properties of melt-grown Al2O3,” J. Am. Ceram. Soc., 87, No. 4, 633–639 (2004).10.1111/j.1551-2916.2004.00633.x ↗
41. J. Y. Pastor, J. Llorca, P. Roza, et al., “Mechanical properties of melt-grown Al2O3–ZrO2(Y2O3) eutectics with different microstructure,” J. Europ. Ceram. Soc., 25, No. 8, 1215–1223 (2005).10.1016/j.jeurceramsoc.2005.01.004 ↗
42. J. H. Lee, A. Yoshikawa, A. D. Durbin, et al., “Microstructure of Al2O3/ZrO2 eutectic fibers grown by the micro-pulling-down method,” J. Cryst. Growth, 222, No. 4, 791–796 (2001).10.1016/S0022-0248(00)00998-2 ↗
43. J. H. Lee, A. Yoshikawa, H. Kaiden, et al., “Microstructure of Y2O3 doped Al2O3/ZrO2 eutectic fibers grown by the micro-pulling-down method,” J. Cryst Growth, 231, No. 1–2, 179–185.10.1016/S0022-0248(01)01451-8 ↗
44. L. Mazerolles, D. Michel, and M. J. Hytch, “Microstructures and interfaces in directionally solidified oxide–oxide eutectics,” J. Europ. Ceram. Soc., 25, No. 8, 1389–1395 (2005).10.1016/j.jeurceramsoc.2005.01.015 ↗
45. Y. Mizutani, H. Yasuda, N. Maeda, and Y. Waku, “Coupled growth of the Al2O3–YAG eutectic system in the undercooled melt,” J. Jap. Inst. Met., 66, No. 1, 9–15 (2002).10.2320/jinstmet1952.66.1_9 ↗
46. D. Viechnicki and F. Schmidt, “Eutectic solidification in the system Al2O3/Y3Al5O12,” J. Mater. Sci., 4, No. 1, 84–88 (1969).10.1007/BF00555053 ↗
47. T. Mah, T. A. Parthasarathy, and L. F. Matson, “Processing and mechanical properties of Al2O3/Y3Al5O12 (YAG) eutectic composite,” Ceram. Eng. Sci. Proc., 11, No. 9–10, 1617–1627 (1990).10.1002/9780470313053.ch36 ↗
48. Y. Waku, H. Otsubo, N. Nakagawa, and Y. Kohtoku, “Sapphire matrix composites reinforced with single crystal YAG phase,” J. Mater. Sci., 31, No. 17, 4663–4670 (1996).10.1007/BF00366367 ↗
49. G. N. Morscher, S. C. Farmer, and A. Sayir, “Bend stress relaxation of Al2O3–YAG eutectic fibers,” Ceram. Eng. Sci. Proc., No. 9–10, 959–968 (1995).
50. S. C. Farmer, A. Sayir, P. O. Dickerson, and S. L. Draper, “Microstructural stability and strength retention in directionally solidified Al2O3–YAG eutectic fibers,” Ceram. Eng. Sci. Proc., No. 9–10, 969–976 (1995).10.1002/9780470314784.ch40 ↗
51. A. Yoshikawa, B. M. Epelbaum, K. Hasegawa, et al., “Microstructures in oxide eutectic fibers grown by a modified micro-pulling-down method,” J. Cryst. Growth, 205, No. 3, 305–316 (1999).10.1016/S0022-0248(99)00265-1 ↗
52. A. Yoshikawa, K. Hasegawa, T. Fukuda, et al., “Growth and diameter control of Al2O3/Y3Al5O12 eutectic fiber by micro-pulling down method and its high temperature strength and thermal stability,” Ceram. Eng. Sci. Proc., 20, No. 4, 275–282 (1999).10.1002/9780470294574.ch32 ↗
53. B. M. Epelbaum, A. Yashikawa, K. Shimamura, et al., “Microstructure of Al2O3/Y3Al5O12 eutectic fibers grown by μ-PD method,” J. Cryst. Growth, 198–199, No. 1, 471–475 (1999).10.1016/S0022-0248(98)01052-5 ↗
54. D.-Y. Park, J.-M.Yang, and J. M. Colins, “Coarsening of lamellae microstructures in directionally solidified yttrium aluminate–alumina eutectic fiber,” J. Am. Ceram. Soc., 84, No. 12, 2991–2196 (2001).10.1111/j.1151-2916.2001.tb01126.x ↗
55. J. E. Pitchford, F. Deleglise, M. H. Berger, et al., “Effect of microstructure on the creep behavior of a directionally solidified YAG/alumina eutectic fiber,” Cer. Eng. Sci. Proc., 22, No. 3, 415–420 (2001).10.1002/9780470294680.ch49 ↗
56. E. C. Dickey, C. S. Frazer, T. R. Watkins, and C. R. Hubbard, “Residual stresses in high-temperature ceramic eutectics,” J. Europ. Ceram. Soc., 19, No. 13–14, 2503–2509 (1999).10.1016/S0955-2219(99)00100-4 ↗
57. A. Sayir, “Directional solidification of eutectic ceramics,” in: Computer-Aided Design of High-Temperature Materials, Oxford University Press, Oxford–New York (1999), pp. 197–211.10.1093/oso/9780195120509.003.0016 ↗
58. J.-M. Yang, S. M. Jeng, and S. Chang, “Fracture behavior of directionally solidified Y3Al5O12/Al2O3 eutectic fiber,” J. Am. Ceram. Soc., 79, No. 5, 1218–1222 (1996).10.1111/j.1151-2916.1996.tb08575.x ↗
59. L. E. Matson and N. Hecht, “Microstructural stability and mechanical properties of directionally solidified alumina/YAG eutectic monofilament,” J. Europ. Ceram. Soc., 19, No. 13–14, 2487–2501 (1999).10.1016/S0955-2219(99)00125-9 ↗
60. V. N. Batog, V. G. Karbutov, and N. N. Morozov, “Structural inhomogeneity of directionally solidified eutectics of oxide systems,” Izv. AN SSSR, Neorg. Mater., 22, No. 11, 1864–1868 (1986).
61. T. A. Parthasarathy, T. Mah, and L. F. Matson, “Creep behavior of an Al2O3–Y3Al5O12 eutectic composite,” Ceram. Eng. Sci. Proc., 11, No. 9–10, 1628–1638 (1990).10.1002/9780470313053.ch37 ↗
62. Y. Waku, N. Nakagawa, H. Otsubo, et al., “High-temperature properties of unidirectionally solidified Al2O3/YAG composites,” J. Jap. Inst. Met., 59, No. 1, 71–78 (1995).10.2320/jinstmet1952.59.1_71 ↗
63. Y. Waku, N. Nakagawa, T. Wakamoto, et al., “High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite,” J. Mater. Sci., 33, No. 5, 1217–1225 (1998).10.1023/A:1004377626345 ↗
64. Y. Waku, N. Nakagawa, T. Wakamoto, et al., “The creep and thermal stability characteristics of a unidirectionally solidified Al2O3/YAG eutectic composites,” J. Mater. Sci., 1998, 33, 4943–4961 (1998).10.1023/A:1004486303958 ↗
65. Y. Waku, “Mechanical properties and thermal stability of oxide eutectic composites at high temperatures,” Mater. Manuf. Proc., 13, No. 6, 841–858 (1998).10.1080/10426919808935309 ↗
66. Y. Harada, T. Suzuki, K. Hirano, and Y. Waku, “Ultra-high temperature compressive creep behavior of an in-situ Al2O3 single-crystal/YAG eutectic composite,” J. Europ. Ceram. Soc., 24, 2215–2222 (2004).10.1016/S0955-2219(03)00640-X ↗
67. Y. Waku and T. Sakuma, “Dislocation mechanism of deformation and strength of Al2O3–YAG single crystal composites at high temperatures above 1500°C,” J. Europ. Ceram. Soc., 20, No. 10, 1453–1458 (2000).10.1016/S0955-2219(00)00028-5 ↗
68. S. Ochiai, Y. Sakai, K. Sato, et al., “Fracture characteristics of Al2O3/YAG composite at room temperature to 2023 K,” J. Europ. Ceram. Soc., 25, No. 8, 1241–1249 (2005).10.1016/j.jeurceramsoc.2005.01.006 ↗
69. S. Takata, S. Ueno, Y. Kawakami, et al., “Macrostructure and high-temperature internal friction of unidirectionally solidified Al2O3/YAG eutectic composite,” J. Ceram. Soc. Jap., 109, No. 6, 561–564 (2001).10.2109/jcersj.109.1270_561 ↗
70. N. Bahlawane, T. Watanabe, Y. Waku, et al., “Effect of moisture on the high-temperature stability of unidirectionally solidified Al2O3/YAG eutectic composites,” J. Am. Ceram. Soc., 83, No. 12, 3077–3081 (2000).10.1111/j.1151-2916.2000.tb01685.x ↗
71. Y. Harada, T. Suzuki, and K. Hirano, “Influence of moisture on ultra-high-temperature tensile creep behavior of in situ single-crystal oxide ceramic alumina/yttrium aluminum garnet eutectic composite,” J. Am. Ceram. Soc., 86, No. 6, 951–958 (2003).10.1111/j.1151-2916.2003.tb03403.x ↗
72. Y. Harada, T. Suzuki, K. Hirano, et al., “Environmental effects on ultra-high temperature creep behavior of directionally solidified oxide eutectic ceramics,” J. Europ. Ceram. Soc., 25, No. 8, 1275–1283 (2005).10.1016/j.jeurceramsoc.2005.01.028 ↗
73. A. Otsuka, Y. Waku, K. Kitagawa, and N. Arai, “High temperature corrosion of a unidirectionally solidified Al2O3/YAG eutectic composite,” J. Ceram. Soc. Jap., 111, No. 2, 87–92 (2003).10.2109/jcersj.111.87 ↗
74. A. Otsuka, Y. Waku, and R. Tanaka, “Corrosion of a unidirectionally solidified Al2O3/YAG eutectic composite in a combustion environment,” J. Europ. Ceram. Soc., 25, No. 8, 1269–1274 (2005).10.1016/j.jeurceramsoc.2005.01.008 ↗
75. M. Mizuno, “Phase diagrams of the systems Al2O3–Ho2O3 and Al2O3–Er2O3 at high temperatures,” J. Ceram. Soc. Jap., 87, No. 8, 405–412 (1979).10.2109/jcersj1950.87.1008_405 ↗
76. N. Nakagawa, Y. Waku, T. Wakamoto, et al., “High-temperature properties and thermal stability of a unidirectionally solidified Al2O3/Er3Al5O12 eutectic composite,” J. Jap. Inst. Met., 64, No. 2, 101–107 (2000).10.2320/jinstmet1952.64.2_101 ↗
77. S. Ueno, S. Takata, Y. Tanabe, et al., “Orientation relationship formation in a unidirectionally solidified Al2O3/Ln3Al5O12 (Ln = Y, Er) eutectic system,” J. Jap. Inst. Met., 65, No. 3, 135–138 (2001).10.2320/jinstmet1952.65.3_135 ↗
78. Y. Waku, N. Nakagawa, H. Ohtsubo, et al., “Fracture and deformation behavior of melt growth composites at very high temperature,” J. Mater. Sci., 36, 1585–1594 (2001).10.1023/A:1017519113164 ↗
79. Y. Waku, “High-temperature characteristics of melt grown composite with a novel microstructure,” J. Jap. Inst. Met., 64, No. 11, 977–984 (2000).10.2320/jinstmet1952.64.11_977 ↗
80. N. Nakagawa, H. Ohtsubo, Y. Waku, and H. Yugami, “Thermal emission properties of Al2O3/Er3Al5O12 eutectic ceramics,” J. Europ. Ceram. Soc., 25, No. 8, 1285–1291 (2005).10.1016/j.jeurceramsoc.2005.01.031 ↗
81. J. M. Fernandes, A. Sayir, and S. C. Farmer, “High-temperature creep deformation of directionally solidified Al2O3/Er3Al5O12,” Acta Mater., 51, No. 6, 1705–1720 (2003).10.1016/S1359-6454(02)00571-2 ↗
82. J. M. Fernandes and A. Sayir, “Creep of directionally solidified Al2O3/Er3Al5O12 fibers with hypoeutectic composition,” Cer. Eng. Sci. Proc., 22, No. 3, 421–428 (2001).
83. M. Mizuno, T. Yamada, and T. Noguchi, “Phase diagrams of the systems Al2O3–Eu2O3 and Al2O3–Gd2O3 at high temperatures,” J. Ceram. Soc. Jap., 85, No. 11, 543–549 (1977).10.2109/jcersj1950.85.987_543 ↗
84. E. R. Andreeta, M. R. B. Andreeta, and A. C. Hernandes, “Laser heated pedestal growth of Al2O3/GdAlO3 eutectic powder,” J. Cryst. Growth, 234, No. 4, 782–785 (2002).10.1016/S0022-0248(01)01764-X ↗
85. Y. Waku, N. Nakagawa, T. Wakamoto, et al., “A ductile ceramic eutectic composite with high strength at 1873 K,” Nature, 389, 4 Sept., 49–52 (1997).10.1038/37937 ↗
86. Y. Harada, T. Suzuki, K. Hirano, et al., “Creep behaviors of in-situ single crystal Al2O3/YAG and Al2O3/GAP eutectic composites,” J. Ceram. Soc. Jap., Supplement, 112, No. 5, S294–S298 (2004).
87. H. Ohtsubo, N. Nakagawa, A. Mitani, et al., “High temperature strength characteristics of a unidirectionally solidified Al2O3/GdAlO3 eutectic composite,” J. Ceram. Soc. Jap., Supplement, 112, No. 5, S358–S362 (2004).
88. A. Larrea, G. F. De la Fuente, R. I. Merino, and V. M. Orera, “ZrO2–Al2O3 eutectic plates produced by laser zone melting,” J. Europ. Ceram. Soc., 22, No. 2, 191–198 (2002).10.1016/S0955-2219(01)00279-5 ↗
89. A. Larrea, V. M. Orera, R. I. Merino, and J. I. Pena, “Microstructure and mechanical properties of Al2O3–YSZ and Al2O3–YAG directionally solidified eutectic plates,” J. Europ. Ceram. Soc., 25, No. 8, 1419–1429 (2005).10.1016/j.jeurceramsoc.2005.01.021 ↗
90. M. Omori, T. Isobe, and T. Hirai, “Consolidation of eutectic powder of Al2O3–GdAlO3,” J. Am. Ceram. Soc., 83, No.11, 2878–2880 (2000).10.1111/j.1151-2916.2000.tb01652.x ↗
91. T. Isobe, M. Omori, S. Uchida, et al., “Consolidation of Al2O3–GdAlO3 eutectic powder prepared from induction-melted solid and strength at high temperature,” Sci. Techn. Adv. Mater., 3, No. 3, 239–244 (2002).10.1016/S1468-6996(02)00021-9 ↗
92. A. Yoshikawa, K. Hasegawa, J. N. Lee, et al., “Phase identification of Al2O3/RE3Al5O12 and Al2O3/REAlO3 (RE = Sm–Lu, Y) eutectics,” J. Cryst. Growth, 218, No. 1, 67–73 (2000).10.1016/S0022-0248(00)00516-9 ↗
93. P. Wu and A. D. Pelton, “Coupled thermodynamic — phase diagram assessment of the rare earth oxide — aluminum oxide binary systems,” J. All. Compd., 179, 259–287 (1992).10.1016/0925-8388(92)90227-Z ↗
94. A. Ueno, S. Takata, Y. Tanabe, et al., “Microstructures and oriented relationship formation and rod–lamella transition in a unidirectionally solidified Al2O3/LnAlO3 (Ln = La, Nd, Sm, Gd) eutectic system,” J. Jap. Inst. Met., 66, No. 3, 143–146 (2002).10.2320/jinstmet1952.66.3_143 ↗
95. S. M. Lakiza, and L. M. Lopato, “Phase diagram of the Al2O3–ZrO2–La2O3 system,” J. Europ. Ceram. Soc., 25, No. 8, 1373–1380 (2005).10.1016/j.jeurceramsoc.2005.01.014 ↗
96. S. Lakiza, O. Fabrichnaya, Ch. Wang, et al., “Phase diagram of the ZrO2–Gd2O3–Al2O3 system,” J. Europ. Ceram. Soc., 26, No. 3, 233–246 (2006).10.1016/j.jeurceramsoc.2004.11.011 ↗
97. S. Lakiza and L. Lopato, “Phase diagram of the alumina–zirconia–samaria system,” J. Am. Ceram. Soc., 89, No. 11, 3516–3521 (2006).10.1111/j.1551-2916.2006.01263.x ↗
98. S. M. Lakiza and L. M. Lopato, “Phase diagram of the Al2O3–ZrO2–Nd2O3 system,” J. Europ. Ceram. Soc., 26, 3725–3732 (2006).10.1016/j.jeurceramsoc.2005.12.005 ↗
99. S. M. Lakiza, Z. O. Zaitseva, and L. M. Lopato, “Phase diagram of the Al2O3–ZrO2–Er2O3 system. II. Phase diagram liquidus surface,” Powder Metall. Met. Ceram., 46, No. 1–2, 51–57 (2007).10.1007/s11106-007-0010-z ↗
100. S. M. Lakiza, Z. O. Zaitseva, and L. M. Lopato, “Al2O3–ZrO2―Yb2O3 phase diagram. II. Liquidus surface,” Powder Metall. Met. Ceram., 47, No. 5–6, 338–343 (2008).10.1007/s11106-008-9025-3 ↗