journal article·2019-07

Development of Mg-Alloy by Powder Metallurgy Method and Its Characterization

Neeraj Sharma, Gurpreet Singh, Pardeep Sharma, Amit Singla

Powder Metallurgy and Metal Ceramics· Volume 58· Issue 3-4
Publisher page

Abstract

In the present research work, an attempt has been made to make Mg-alloy specimen by powder metallurgy. Due to sensitivity of the material, a proper selection of sintering atmosphere has been made. Mg powder along with other powders has been blended with a high energy ball mill. In this work, the effect of input parameters, such as compaction pressure, sintering temperature and sintering time was investigated on porosity, microhardness and dimensional change. The compaction pressure and sintering temperature play a significant role in the porosity and microhardness. Increasing the compaction pressure plays a positive role in the microhardness. The maximum value of the porosity in the present work was up to 37.41%. The dimensional expansion after sintering varies from 2 to 4.3%. The results of the porosity and microhardness were verified by scanning electron microscopy and X-ray diffraction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. N. Li and Y. Zheng, “Novel magnesium alloys developed for biomedical application: A Review,” J. Mater. Sci. Technol., 29, No. 6, 489–502 (2013).10.1016/j.jmst.2013.02.005 ↗
2. M. Wolff, T. Ebel, and M. Dahms, “Sintering of magnesium,” Adv. Eng. Mater., 12, No. 9, 829–836 (2010).10.1002/adem.201000038 ↗
3. Y.F. Zhao, J.J. Si, J.G. Song, and X.D. Hui, “High strength Mg–Zn–Ca alloys prepared by atomization and hot pressing process,” Mater. Lett., 118, 55–58 (2014).10.1016/j.matlet.2013.12.053 ↗
4. G. Klanik, M. Zdovc, U. Kovsca, B. Prasek, J. Kovac, and J. Rozman, “Osseointegration and rejection of a titanium screw,” Mater. Technol., 44, No. 5, 261–264 (2010).
5. K. Kumar, R.S. Gill, and U. Batra, “Challenges and opportunities for biodegradable magnesium alloy implants,” Mater. Technol., 33, No. 2, 153–172 (2018).10.1080/10667857.2017.1377973 ↗
6. M. Peron, J. Torgersen, and F. Berto, “Mg and its alloys for biomedical applications: exploring corrosion and its interplay with mechanical failure,” Metals, 7, No. 7, 252 (2017).10.3390/met7070252 ↗
7. X.N. Gu and Y.F. Zheng, “A review on magnesium alloys as biodegradable materials,” Front. Mater. Sci. China, 4, No. 2, 111–115 (2010).10.1007/s11706-010-0024-1 ↗
8. M. Kilic, D. Ozyurek, and T. Tuncay, “Dry sliding wear behaviour and microstructure of the W–Ni–Fe and W–Ni–Cu heavy alloys produced by powder metallurgy technique,” Powder Metall. Met. Ceram., 55, Nos. 1–2, 54–63 (2016).10.1007/s11106-016-9780-5 ↗
9. I. Gunes, T. Uygunoglu, and M. Erdogan, “Effect of sintering duration on some properties of pure magnesium,” Powder Metall. Met. Ceram., 54, Nos. 3–4, 156–165 (2015).10.1007/s11106-015-9693-8 ↗
10. C.W. Hennessey, W.F. Caley, G.J. Kipouros, and D.P. Bishop, “Development of Al-Si-Base P/M alloys,” Int. J. Powder Metall., 41, No. 1, 50–63 (2005).
11. G.J. Kipouros, W.F. Caley, and D.P. Bishop, “On the advantages of using powder metallurgy in new light metal alloy design,” Metall. Mater. Trans. A, 37, No. 12, 3429–3436 (2006).10.1007/s11661-006-1037-3 ↗
12. N. Sharma, T. Raj, and K.K. Jangra, “Microstructural evaluation of Ni Ti-powder, steatite, and steel balls after different milling conditions,” Mater. Manuf. Process., 31, No. 5, 628–632 (2016).10.1080/10426914.2015.1004710 ↗
13. N. Sharma, K.K. Jangra, and T. Raj, “Fabrication of NiTi alloy: A review,” P. I. Mech. Eng. L- J. Mat., 232, No. 3, 250–269 (2018).
14. N. Sharma, T. Raj, and K. Kumar, “Physical and tribological characteristics of porous NiTi SMA fabricated by powder metallurgy,” Particul. Sci. Technol., 35, No. 5, 541–546 (2017).10.1080/02726351.2016.1171814 ↗
15. N. Sharma and K. Kumar, “Mechanical characteristics and bioactivity of porous Ni50–xTi50Cux (x = 0, 5 and 10) prepared by P/M,” Mater. Sci. Techn., 34, No. 8, 934–944 (2018).10.1080/02670836.2017.1412041 ↗
16. G.K. Williamson and W.H. Hall, “X-ray line broadening from filed aluminium and wolfram,” Acta Metall., 1, No. 1, 22-31 (1953).10.1016/0001-6160(53)90006-6 ↗