Studying the Elastic Properties and Adhesive Strength of Plasma-Sprayed Double-Layer Coatings During Tensile Tests
Source abstract
Abstract
The elastic properties and adhesion strength of double-layer coatings, produced by plasma-spray deposition of yttrium-stabilized zirconia onto a CoNiCrAlY alloy bond coat are studied. A model for determining the normal and shear stresses in a double-layer coating is developed. The fracture mechanisms in a plasma-sprayed ceramic top coat on a plasma-sprayed metallic bond coat are established. It is shown that the tensile load creates numerous cracks in the ceramic top coat that penetrate the metallic bond coat, resulting in further separation of the ceramic top coat. An increase in the thickness of the top coat alters the fracture mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Material Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. S. Sjostrom and H. Brodin, “Influence of TBC end geometry on the TMF life of an APS TBC,” Proc. Eng., 2, No. 1, 1363–1371 (2010).10.1016/j.proeng.2010.03.148 ↗
2. S. Takahashi and Y. Harada, “In situ observation of creep and fatigue failure behavior for plasma-sprayed thermal barrier coating systems,” J. Sol. Mechan. Mater. Eng., 4, No. 2, 235–243 (2010).10.1299/jmmp.4.235 ↗
3. I. O. Golosnoy, A. Cipitria, and T. W. Clyne, “Heat transfer through plasma-sprayed thermal barrier coatings in gas turbines: A review of recent work,” J. Thermal Spray Technol., 18, No. 5, 809–821 (2009).10.1007/s11666-009-9337-y ↗
4. A. Kucuk, C. G. Dambra, C. C. Berndt, “Influence of plasma spray parameters on the cracking behavior of yttrium stabilized zirconia coatings,” Prac. Failure Anal., 1, No. 1, 55–64 (2001).
5. S. H. Leigh, C. K. Lin, and C. C. Berndt, “Elastic response of thermal spray deposits under indentation tests,” J. Am. Ceram. Soc., 80, No. 8, 2093–2099 (1997).10.1111/j.1151-2916.1997.tb03093.x ↗
6. S. Bose and J. DeMasi-Marcin, “Thermal barrier coating experience in gas turbine engines at Pratt & Whitney,” J. Thermal Spray Technol., 6, No. 1, 99–104 (1997).10.1007/BF02646318 ↗
7. W. Tillmann and J. Nebel, “Analysis of the mechanical properties of an arc sprayed WC–FeCSiMn coating: compression, bending, and tension behavior,” J. Thermal Spray Technol., 20, Nos. 1–2, 317–327 (2011).10.1007/s11666-010-9567-z ↗
8. F. Cernuschi, P. G. Bison, S. Marinetti, and P. Scardi, “Thermophysical, mechanical, and microstructural characterization of aged free-standing plasma-sprayed zirconia coatings,” Acta Mater., 56, No. 16, 4477–4488 (2008).10.1016/j.actamat.2008.04.067 ↗
9. J. A. Thompson and T. W. Clyne, “The effect of heat treatment on the stiffness of zirconia top coats in plasma-sprayed TBC,” Acta Mater., 49, No. 9, 1565–1575 (2001).10.1016/S1359-6454(01)00065-9 ↗
10. N. A. Dolgov, Resistance to Deformation and Damage of Materials with Functional Coatings [in Russian], Krok, Ternopol’ (2010), p. 231.
11. N. A. Dolgov, “Method for determining the modulus of elasticity for gas thermal spray coatings,” Powder Metall. Met. Ceram., 43, Nos. 7–8, 423–428 (2004).10.1023/B:PMMC.0000048138.67323.49 ↗
12. E. F. Rybicki, J. R. Shadley, Y. Xiong, and D. J. Greving, “A cantilever beam method for evaluating Young's modulus and Poisson's ratio of thermal spray coatings,” J. Thermal Spray Technol., 4, No. 4, 377–383 (1995).10.1007/BF02648639 ↗
13. N. A. Dolgov, “Determination of stresses in a two-layer coating,” Strength Mater., 37, No. 4, 422–431 (2005).10.1007/s11223-005-0053-7 ↗
14. L. Ya. Yaroshevskaya, B. A. Lyashenko, R. V. Tolstopyatov, and O. P. Smishchenko, “Evaluating the composite section method of determining the elastic properties of enamel coatings,” Strength of Materials, 4, No. 5, 634–636 (1972).10.1007/BF01529338 ↗
15. C. J. Tavares, S. M. Marques, S. Lanceros-Mendez, et al., “Strain analysis of photocatalytic TiO2 thin films on polymer substrates,” Thin Sol. Films, 516, No. 7, 1434–1438 (2008).10.1016/j.tsf.2007.03.134 ↗
16. D. Y. W. Yu and F. Spaepen, “The yield strength of thin copper films on Kapton,” J. Applied Physics, 2004. 95, No. 6, 2991–2997 (2004).
17. F. Aviles, L. Llanes, and A. I. Oliva, “Elasto-plastic properties of thin gold films deposited onto polymeric substrates,” J. Mater. Sci., 44, No. 10, 2590–2598 (2009).10.1007/s10853-009-3339-5 ↗
18. D. Schwingel, R. Taylor, T. Haubold, et al., “Mechanical and thermophysical properties of thick PYSZ thermal barrier coatings: correlation with microstructure and spraying parameters,” Surf. Coat. Technol., 108, Nos. 1–3, 99–106 (1998).10.1016/S0257-8972(98)00628-8 ↗
19. I. Sevostianov, M. Kachanov, J. Ruud, et al., “Quantitative characterization of microstructures of plasma-sprayed coatings and their conductive and elastic properties,” Mater. Sci. Eng. A., 386, No. 1, 164–174 (2004).10.1016/S0921-5093(04)00924-4 ↗
20. J. S. Wallace and J. Ilavsky, “Elastic modulus measurements in plasma sprayed deposits,” J. Thermal Spray Technol., 7, No. 4, 521–526 (1998).10.1361/105996398770350747 ↗
21. Y. Liu, T. Nakamura, V. Srinivasan, et al., “Non-linear elastic properties of plasma-sprayed zirconia coatings and associated relationships with processing conditions,” Acta Mater., 55, No. 14, 4667–4678 (2007).10.1016/j.actamat.2007.04.037 ↗
22. P. A. Siemers and R. L. Mehan, “Mechanical and physical properties of plasma-sprayed stabilized zirconia,” Ceramic Eng. Sci. Proc., 4, No. 9, 828–840 (1983).10.1002/9780470320167.ch13 ↗
23. M. Eskner and R. Sandstrom, “Measurement of the elastic modulus of a plasma-sprayed thermal barrier coating using spherical indentation,” Surf. Coat. Technol., 177, 165–171 (2004).10.1016/j.surfcoat.2003.06.018 ↗
24. R. Vassen, G. Kerkhoff, and D. Stover, “Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings,” Mater. Sci. Eng. A., 303, Nos. 1–2, 100–109 (2001).10.1016/S0921-5093(00)01853-0 ↗
25. J. Thornton, D. Cookson, and E. Pescott, “The measurement of strains within the bulk of aged and as-sprayed thermal barrier coatings using synchrotron radiation,” Surf. Coat. Technol., 120, 96–102 (1999).10.1016/S0257-8972(99)00340-0 ↗
26. R. Kawase, K. Tanaka, T. Hamamoto, and H. Haraguchi, “Study on elastic constant and residual stress measurements during ceramic coating,” in: Thermal Spray Research and Application: Proc. of the 3th National Thermal Spray Conf. (20–25 May 1990, Long Beach, California), Long Beach (1990), pp. 339–342.
27. D. Zhu and R. A. Miller, “Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions,” J. Thermal Spray Technol., 9, No. 2, 175–180 (2000).10.1361/105996300770349890 ↗
28. B. Siebert, C. Funke, R. Vassen, and D. Stover, “Changes in porosity and Young's modulus due to the sintering of plasma sprayed thermal barrier coatings,” J. Mater. Proces. Technol., 92, No. 93, 217–223 (1999).10.1016/S0924-0136(99)00243-5 ↗
29. C. A. Johnson, J. A. Ruud, R. Bruce, and D. Wortman, “Relationships between residual stress, microstructure and mechanical properties of electron beam physical vapor deposition thermal barrier coatings,” Surf. Coat. Technol., 109, No. 1–3, 80–85 (1998).10.1016/S0257-8972(98)00668-9 ↗
30. J. W. Adams, R. Ruh, and K. S. Mazdiyasni, “Young’s modulus, flexural strength, and fracture of yttrium-stabilized zirconia versus temperature,” J. Am. Ceram. Soc., 80, No. 4, 903–908 (1997).10.1111/j.1151-2916.1997.tb02920.x ↗
31. Z. Wang, A. Kulkarni, S. Deshpande, et al., “Effects of pores and interfaces on effective properties of plasma sprayed zirconia coatings,” Acta Mater., 51, No. 18, 5319–5334 (2003).10.1016/S1359-6454(03)00390-2 ↗