journal article·2004-11

Mechanical properties of green compacts. II. Effect of powder relative bulk density on the strength of compacts with different forming temperature conditions

A. K. Radchenko

Powder Metallurgy and Metal Ceramics· Volume 43· Issue 11-12
Publisher page

Abstract

Mechanisms of strength for green compacts made from powders of iron, nickel and its alloys, copper, tin, and zinc are analyzed. The strength of green compacts prepared from metal powders of medium fineness with a relative bulk density (RBD) from 0.119 to 0.568 by two-way compaction in rigid dies with homologous temperatures from 0.15 to 0.59 (pressure from 200 to 800 MPa, powder deformation rate 10−2–10−3 m/sec) is studied. Compact strength is determined by diametric compression of cylindrical compacts. The dependence of strength on compact porosity is studied by the Bal’shin equation. The possibility is demonstrated of using this relationship in order to describe hot compaction and formally describe cold compaction of powders with RBD up to 0.40. The effect of homologous temperature and powder RBD on compact strength is determined. The homologous temperature for transition from warm to hot compaction and the effect of compact density (degree of deformation) on this temperature is studied. It is shown that linear approximation is possible for the dependence of compact strength on powder RBD according to the equation σ f.c = 87–217⋅RBD.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A. K. Radchenko, ?Mechanical properties of green compacts. I. Analysis of phenomenological dependences describing the strength of green compacts,? Poroshk. Metall., Nos. 9?10, 12?27 (2004).
2. �. S. Karakozov, Pressure Welding of Metals [in Russian], Mashinostroenie, Moscow (1986).
3. M. Yu. Bal?shin, Powder Metallurgy [in Russia], Metallurgizdat, Moscow (1948).
4. M. Yu. Bal?shin, Scientific Bases of Powder Metallurgy and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).
5. M. Yu. Bal?shin, ?Control of sintered ductile material properties,? Poroshk. Metall., No. 9, 36?44 (1979).
6. I. M. Stroiman, Cold Welding of Metals [in Russian], Mashinostroenie, Leningrad (1985).
7. V. V. Prokropivnyi and V. V. Skorokhod, ?Cohesion (adhesion, seizure, joining, welding) of interparticle surfaces and formation of grain boundaries during sintering, recovery, recrystallization, superplasticity, friction, and failure,? Preprint No. 95-2, Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev (1995).
8. V. V. Skorokhod, ?Theory of solid phase sintering of cermet articles,? in: Modern Materials, Inst. of Nuclear Sci., Vincha, Yugoslavia (1967).
9. V. V. Skorokhod, ?The main trends in study and quantitative description of sintering processes,? in: Science of Sintering, D. P. Uskokovic, H. Palmour III, R. M. Spriggs (eds.), Pl. Press, Beograd, Yugoslavia (1989).
10. Yu. L. Krasulin, S. M. Barinov, V. S. Ivanov, and F. R. Karelin, ?Joining of powders during thermal deformation,? Dokl. Akad. Nauk SSSR, 291, No.6, 1355?1358 (1986).
11. Yu. L. Krasulin, Interaction of Metal with Semiconductor in the Solid Phase [in Russian], Nauka, Moscow (1971).
12. A. K. Radchenko, ?Choice of powder particle shape criterion applied to its formability,? in: Modern Problems of Physical Metallurgy [in Russian], Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev (2002).
13. V. V. Skorokhod, ?Physicomechanical properties of porous materials,? Poroshkovaya Metallurgiya?77 [in Russian], Nauk. Dumka, Kiev (1977).
14. M. M. Ristich, V. I. Trefilov, Yu. V. Mil?man, et al., Structure and Mechanical Properties of Sintered Materials, Serb. Acad. Sci. and Art, Belgrade (1992).
15. V. A. Evstratov, Theory of Treating Metals under Pressure [in Russian] Vyssh. Shkola, Kharkov (1981).
16. L. N. Larikov, ?Recrystallization,? in: Encyclopaedia of Inorganic Materials, in 2 vols., Vol. 2 [in Russian], UR�, Kiev (1977).
17. A. K. Radchenko and O. A. Katrus, ?Formability and strength of rolled products made from powder,? Poroshk. Metall., No. 7, 11?18 (1987).10.1007/BF01156549 ↗
18. E. B. Lozhechnikov, Rolling Powder Metallurgy [in Russian], Metallurgiya, Moscow (1987).
19. I. D. Radomysel?skii and G. A. Vinogradov, Compaction and Rolling of Metal Powders [in Russian], Mashgiz, Moscow; Kiev (1963).
20. O. A. Katrus and V. K. Gribkov, ?Parameters of the aggregate structure in the noncoherent zone during rolling,? Poroshk. Metall., No. 7, 23?32 (1979).
21. G. A. Vinogradov and V. P. Katashinskii, Theory of Sheet Rolling for Metal Powders and Granules [in Russian], Metalllurgiya, Moscow (1979).
22. A. I. Otrok, ?Energy indices and material fragmentation mechanism during deformation,? Tekhnologicheskie Sistemy, No. 3, 101?107 (2002).
23. L. V. Tikhonov, V. A. Kononenko, G. I. Prokopenko, and V. A. Rafalovskii (eds.), ?Mechanical properties of metals and alloys,? in: Structure and Properties of Metal and Alloys: Handbook [in Russian], Nauk. Dumka, Kiev (1986).
24. GOST 25280-82, Powder Metallurgy. Methods of Determining Compactability and Formability, Intr. 01.01.83.
25. V. G. Osipov, ?Determination of the strength of compacts made from metal powders,? Zavod. Lab., 26, No.1, 122?125 (1960).
26. K. G. Rego, Metrological Treatment of the Results of Technical Measurements: Handbook [in Russian], Tekhnika, Kiev (1987).
27. R. U. Kahn and P. Haazen (eds.), ?Physicomechanical properties of metals and alloys,? in: Physical Metallurgy, Vol. 3 [Russian translation], Metallurgiya, Moscow (1987).
28. G. V. Samsonov and M. S. Koval?chenko, Hot Compaction [in Russian], Gos. Idz. Nauch.-Tekhn. Lit. UkrSSR, Kiev (1962).
29. R. Ya. Popil?skii and F. V. Kondrashev, Compaction of Ceramic Powders [in Russian], Metallurgiya, Moscow (1968).
30. O. A. Katrus and A. I. Otrok, ?Study of the formability of metal powders during rolling,? Poroshk. Metall., No. 8, 36?40 (1971).10.1007/BF00804385 ↗
31. L. A. Poznyak, K. A. Gogaev, V. A. Shtakun, and V. N. Ul?shin, ?Formation and solid-phase sintering of high-speed steel powders,? Poroshk. Metall., No. 4, 52?55 (1990).10.1007/BF00797231 ↗
32. A. M. Dmitriev, ?Cold compaction of articles made from iron powders,? Kuzn.-Shtamp. Proizv., No. 4, 17?19 (1985).
33. V. N. Subich, ?Technological efficiency of forming by combined loading,? in: Intense Technology for Metal Forming [in Russian], Mashinostroenie, Moscow (1986).
34. G. A. Baglyuk, ?Improved process for deforming powder materials on the basis of controlling contact friction forces,? Poroshk. Metall., Nos. 1?2, 19?25 (2002).
35. V. I. Kornilov and I. V. Shepel?skii, ?Effect of surface contact restoration for granules on coalescence strength,? Tekhnologiya Legkikh Splavov, No. 2, 22?25 (1985).
36. A. Noiman and E. Richter (eds.), Welding, Soldering, Gluing, and Cutting of Metals and Plastics: Handbook [Russian translation], Metallurgya, Moscow (1985).
37. R. L. Herwitt, W. Wallace, and M. C. Malherbe, ?Plastic deformation in metal powder compaction,? Powder Metal., 17, No.33, 1?12 (1974).10.1179/pom.1974.17.33.001 ↗
38. �. L. Ter-Grigoryan, ?Sintering of metal powders at low temperature,? Proc. Second Sci.-Tech. Session on Powder Metallurgy [in Russian], Izd. Akad. Nauk UkrSSR, Kiev (1955).
39. E. I. Gutmanas, Y. Schefer, and D. Zak, ?Mechanical properties and microstructure of cold sintered ferrous alloys and composites,? Int. Conf. on Powder Metallurgy (June 20?25, Milano, Florence, 1982), Milano (1982).
40. E. I. Gutmanas, ?High pressure compaction and cold sintering of stainless steel powders,? Powder Met. Int., 12, No.4, 378?382 (1980).
41. P. Kasiraj, T. Vreeland, R. B. Schwaz, Jr, and T. J. Ahrens, ?Shock consolidation of rapidly solidified steel powder,? Acta Met., 32, No.8, 1235?1241 (1984).10.1016/0001-6160(84)90130-5 ↗
42. R. A. Andrievskii, Introduction to Powder Metallurgy [in Russian], Ilim, Frunze (1968).
43. E. I. Andrianov, Methods for Determining Structural-Mechanical Characteristics of Powder Materials [in Russian], Khimiya, Moscow (1982).
44. A. Guo, J. K. Baddow, and A. F. Vetter, ?Simple relationship between particle shape effects and density, flow rate and Hausner ratio,? Powder Technol., 43, No.3, 279?294 (1985).10.1016/0032-5910(85)80009-7 ↗
45. Y. Balasubramanian, P. N. Singh, and P. Ramakrishnan, ?Effect of some particle characteristics on the bulk properties of powders,? Powder Metal Int., 16, No.2, 56?59 (1984).
46. H�gan�s. Iron and Steel Powder for Sintered Articles, H�gan�s, Sweden (1990).
47. L. A. Poznyak, K. A. Gogaev, and V. A. Shtakun, ?Compactability of high-speed steel powders atomized with high-pressure water,? Poroshk. Metall., No. 6, 15?18 (1988).10.1007/BF00798845 ↗
48. N. Pioro, E. Pioro, Yu. Lipuchin, and S. Solonin, ?Bistructural iron powder,? 1998 PM World Cong., Powder production (May 31?June 4, 1998, Barcelona, Spain), Barcelona (1998), pp. 97?101.
49. A. P. Karnaukhov, ?Globular model of porous bodies with corpuscular structure,? Kinetika i Kataliz, 12, No.4, 1025?1033 (1971).