Structure and Properties of Wear-Resistant Spark-Deposited Coatings Produced with a Titanium Carbide Alloy Anode
Source abstract
Abstract
The paper examines the phase and structure formation during hot pressing of titanium carbide electrode materials as well as the structurization and properties of spark-deposited coatings on steel substrates. The influence of the operating current used for erosion processing on the phase composition and hardness of the coatings is established. It is shown that the electrode materials with a certain composition and structure enable the electrospark deposition of 100 μm-thick coatings with hardness to 14 GPa. The mass of the material deposited on a steel substrate is three times higher than that formed using standard titanium carbide alloy TN20. The wear resistance of the coatings in abrasive and dry sliding friction is high, hence they may be recommended for protection of steel parts for severe wear applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Coatings · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. M. A. Teplenko, I. A. Podchernyaeva, A. D. Panasyuk, et al., “Structure and wear resistance of coatings on titanium alloy and steels obtained by electrospark alloying with AlN–ZrB2 material,” Powder Metall. Met. Ceram., 41, No. 3–4, 154–161 (2002).10.1023/A:1019834910526 ↗
2. M. S. Kovalchenko, Yu. G. Tkachenko, V. F. Britun, et al., “Structure, mechanical and erosive properties of AlN–MoSi2 composite materials and their electrospark-deposited coatings,” Powder Metall. Met. Ceram., 47, No. 3–4, 183–190 (2008).10.1007/s11106-008-9003-9 ↗
3. Yu. G. Tkachenko, M. S. Koval’chenko, V. F. Britun, et al., “Production, properties, and erosion characteristics of B4C–Al composite materials,” Powder Metall. Met. Ceram., 48, No. 1–2, 60–65 (2009).10.1007/s11106-009-9095-x ↗
4. G. A. Bovkun, Yu. G. Tkachenko, and D. Z. Yurchenko, “Tungsten-free electrode materials for electrospark alloying of metal surfaces,” Élektron. Obrab. Mater., No. 5, 27–29 (1983).
5. M. S. Koval’chenko, A. V. Paustovskii, S. N. Kirilenko, et al., “Electric-spark alloying of steel with tungsten-free hard metals,” Powder Metall. Met. Ceram., 23, No. 6, 463–465 (1984).10.1007/BF00794669 ↗
6. V. V. Polotai, “Friction and wear testing machines,” Technol. Organiz. Proizv., No. 6, 86–88 (1970).
7. M. M. Khrushchev, “On standardization of an abrasive wear testing method,” in: Wear Testing Methods [in Russian], Izd. Akad. Nauk SSSR, Moscow (1962), pp. 40–47.