Structural Features and Solid-Solution Hardening of High-Entropy CrMnFeCoNi Alloy
Source abstract
Abstract
The phase composition, microstructure, and mechanical properties of the single-phase CrMnFeCoNi high-entropy alloy with fcc lattice produced by argon-arc vacuum melting are studied. The alloy solid-solution hardening mechanism is analyzed. The abnormally high athermic solid-solution hardening of the alloy is due to variation in the Burgers vector along the dislocation line and a vector component perpendicular to the slip plane. The activation energy of dislocation movement and activation volume are calculated. The activation energy of dislocation movement is close to the activation energy of pure metals with fcc lattices, and the activation volume is significantly lower compared to that of pure metals because picosized distortions grow in the crystal lattice of the multicomponent alloy. The ratio of hardness and yield stress for this alloy is examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. B. Cantor, I. T. H. Chang, P. Knight, and A. J. B. Vincent, “Microstructural development in equiatomic multicomponent alloys,” Mater. Sci. Eng. A, 375–377, 213–218 (2004).10.1016/j.msea.2003.10.257 ↗
2. S. Ranganathan, “Alloyed pleasures: multimetallic cocktails,” Curr. Sci., 85, No. 5, 1404–1406 (2003).
3. J. W. Yeh, Y. L. Chen, S. J. Lin, et al., “High-entropy alloys—a new era of exploitation,” Mater. Sci. Forum, 560, 1–9 (2007).10.4028/www.scientific.net/MSF.560.1 ↗
4. Tsai Ming Hung, “Physical properties of high entropy alloys,” Entropy, 15, 5338–5345 (2013).10.3390/e15125338 ↗
5. S. A. Firstov, V. F. Gorban’, N. I. Danilenko, et al., “Tribotechnical characteristics of high-entropy alloys,” Nanostrukt. Materialoved., No. 2, 63–70 (2013).
6. M. V. Karpets, E. S. Makarenko, A. N. Myslivchenko, et al., “High-temperature diffraction study of FeCoNiMnCr alloy oxidation,” Metallofiz. Noveish. Tekhnol., 36, No. 6, 829–840 (2014).10.15407/mfint.36.06.0829 ↗
7. B. Cantor, “Multicomponent and high entropy alloys,” Entropy, 16, 4749–4768 (2014).10.3390/e16094749 ↗
8. J. W. Yeh, S. K. Chen, S. G. Lin, et al., “Nanostructured high entropy alloys with multiple principal elements: novel alloy design concepts and outcomes,” Adv. Eng. Mater., 6, 299−303 (2004).10.1002/adem.200300567 ↗
9. Y. F. Ye, Q. Wang, J. Lu, et al., “Design of high entropy alloys: a single-parameter thermodynamic rule,” Scripta Mater., 104, 53–55 (2015).10.1016/j.scriptamat.2015.03.023 ↗
10. O. N. Senkov, G. B. Wilks, J. M. Scott, and D. B. Miracle, “Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys,” Intermetallics, 19, 698–706 (2011).10.1016/j.intermet.2011.01.004 ↗
11. O. N. Senkov, G. B. Wilks, D. B. Miracl, et al., “Refractory high-entropy alloys,” Intermetallics, 18, 1758–1765 (2010).10.1016/j.intermet.2010.05.014 ↗
12. O. N. Senkov, J. M. Scott, S. V. Senkova, et al., “Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy,” J. Alloys Compd., 509, No. 20, 6043–6048 (2011).10.1016/j.jallcom.2011.02.171 ↗
13. S. A. Firstov, T. G. Rogul’, N. A. Krapivka, et al., “Solid-solution hardening of high-entropy AlTiVCrNbMo alloy,” Deform. Razrush. Mater., No. 2, 9–16 (2013).
14. S. A. Firstov, V. F. Gorban’, N. A. Krapivka, et al., “Hardening and mechanical properties of as-cast highentropy alloys,” Kompoz. Nanostruct., No. 2, 5–20 (2011).
15. S. A. Firstov, V. F. Gorban’, N. A. Krapivka, et al., “Distribution of elements in as-cast multicomponent high-entropy single-phase bcc alloys,” Kompoz. Nanostruct., No. 3, 48–65 (2012).
16. R. L. Fleischer, “Substitutional solution hardening,” Acta Metall., 11, 203–209 (1963).10.1016/0001-6160(63)90213-X ↗
17. N. T. Gudtsov and I. G. Lozinskii, “Studying the ageing of metals and alloys by hardness measurement during vacuum heating,” Zh. Tekh. Fiz., 22, No. 8, 1249–1254 (1952).
18. Yu. V. Mil’man, O. E. Sklyarov, A. P. Udovenko, et al., “Studies on microhardness measurement,” in: Proc. Inst. Metrolog. SSSR [in Russian], Izdatel’stvo Standartov, Moscow–Leningrad (1967), Issue 91, pp. 167–169.
19. L. Vegard, “The constitution of the mixed crystals and the filling of space of the atoms,” Zeitschrift Phys., 5, No. 1, 17–26 (1921).10.1007/BF01349680 ↗
20. Explore Key Information about the Chemical Elements through This Periodic Table [Electronic resource]: http://www.webelements.com .
21. Atomic Radii of the Elements [Electronic resource]: http://en.wikipedia.org/wiki/Atomic_radii_of_the_elements .
22. O. M. Barabash and Yu. N. Koval’, Structure and Properties of Metals and Alloys: Handbook [in Russian], Nakova Dumka, Kyiv (1986), p. 598.
23. V. V. Burdin V. N. Gridnes, and V. N. Minakov, “Phase transformations in iron and carbon steels,” Metallofizika, No. 55, 3–8 (1974).
24. G. A. Salishchev, M. A. Tikhonovsky, D. G. Shaysultanov, et al., “Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system,” J. Alloys Compd., No. 591, 11–21 (2014).
25. N. F. Mott and F. R. N. Nabarro, “Dislocation theory and transient creep,” in: Rep. Conf. on Strength of Solids (July 7–9, 1947, London), University of Bristol, London (1948), pp. 1–19.
26. D. McLean, Mechanical Properties of Metals, Wiley, New York (1962).
27. P. K. Huang, J. W. Yeh, T. T. Shun, et al., “Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating,” Adv. Eng. Mater., 6, 74–78 (2004).10.1002/adem.200300507 ↗
28. Technical Literature Library [in Russian] [Electronic resource]: http://delta-grup.ru/bibliot/18/18.htm .
29. F. Otto, A. Dlouhy, Ch. Somsen, et al., “The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy,” Acta Mater., 61, 5743–5755 (2013).10.1016/j.actamat.2013.06.018 ↗
30. N. Stepanov, M. Tikhonovsky, N. Yurchenko, et al., “Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy,” Intermetallics, 59, 8–17 (2015).10.1016/j.intermet.2014.12.004 ↗
31. V. F. Moiseev, “Effective indicator of metal strain hardening,” Metallofiz. Noveish. Tekhnol., 23, 387–389 (2001).
32. R. J. Asaro, P. Krysl, and B. Kad, “Deformation mechanism transitions in nanoscale fcc metals,” Philos. Mag. Lett., 83, 733–743 (2003).10.1080/09500830310001614540 ↗
33. M. A. Baranov and V. M. Shcherbakov, “Correlation of mechanical properties of austenitic steels and alloys with crystal lattice parameters,” Élektron. Fiz. Tekh. Zh., 5, 1–6 (2010).
34. AK Steel Corporation. 304/304L Stainless Steel. Product Data Bulletin [Electronic resource]: www.aksteel.com .
35. H. G. Van Buren, Imperfections in Crystals, Interscience Publishers, New York (1960).
36. D. Tabor, “Indentation hardness: fifty years on. A personal view,” Philos. Mag. A, 74, No. 5, 1207–1212 (1996).10.1080/01418619608239720 ↗
37. K. L. Johnson, Contact Mechanics, Cambridge University Press, Cambridge (1985).10.1017/CBO9781139171731 ↗
38. D. M. Marsh, “Plastic flow and fracture of glass,” in: Proc. Roy. Soc. London, Vol. 279A, London (1964).10.1098/rspa.1964.0210 ↗
39. A. Kelly, Strong Solids, Clarendon Press, Oxford (1973).
40. L. Chen, Y. Zhao, and X. Qin, “Some aspects of high manganese twinning-induced plasticity (TWIP) steel, a review,” Acta Metall. Sin. (Eng. Lett.), 26, No. 1, 1–15 (2013).10.1007/s40195-012-0501-x ↗
41. A. M. Zhilkashinova, M. K. Skakov, and N. A. Popova, “Relation between strain hardening and plastic strain coefficients for Hadfield austenitic steel,” Vest. Nauki Sib., No. 1, 686–689 (2011).
42. Yu. V. Mil’an, G. G. Kurdyumova, and I. V. Goncharova, “Study of plastic strain mechanism in twinning bcc Cr–Mn alloys,” Deform. Razrush. Mater., No. 12, 31–38 (2005).
43. Yu. N. Podrezov, “Structural sensitivity of hardening parameters,” Fiz. Tekh. Vys. Davl., 20, No. 4, 21–39 (2010).
44. V. A. Krokha, Hardening Curves for Metal Cold Working [in Russian], Mashinostroenie, Moscow (1968), p. 131.
45. Yu. V. Mil’man and V. I. Trefilov, “On the physical nature of yield stress temperature dependence,” in: Metal Fracture Mechanism [in Russian], Naukova Dumka, Kyiv (1966), p. 59.