journal article·2011-07

Field assisted sintering of nanocrystalline titanium nitride powder

V. G. Kolesnichenko, V. P. Popov, O. B. Zgalat-Lozinskii, L. A. Klochkov, T. F. Lobunets, A. I. Raichenko, A. V. Ragulya

Powder Metallurgy and Metal Ceramics· Volume 50· Issue 3-4
Publisher page

Abstract

The effect of field assisted sintering (FAS) on the compaction of TiN ceramics is examined using a nanosized TiN powder. Microstructural evolution at different stages of FAS is evaluated using electron microscopy. Coarse spherical particles (1–5 μm) are found at 700°C. These particles apparently result from excessive heat release on interparticle contacts when an electrical current passes through agglomerates at certain stages. The specific surface area and pore size distribution in sintered samples are examined with static volumetric absorption. The compaction and microstructural evolution are discussed in terms of electric field effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M. A. Meyers, A. Mishra, and D. J. Benson, “Mechanical properties of nanocrystalline materials,” Progr. Mat. Sci., 51, 427–556 (2006).10.1016/j.pmatsci.2005.08.003 ↗
2. V. V. Skorokhod, I. V. Uvarova, and A. V. Ragulya, Physicochemical Kinetics in Nanostructured Systems [in Ukrainian], Akademperiodika, Kiev (2001), p. 180.
3. V. Viswanathan, T. Laha, K. Balani, et al., “Challenges and advances in nanocomposite processing techniques,” Mater. Sci. Eng. R, 54, 121–285 (2006).10.1016/j.mser.2006.11.002 ↗
4. A. V. Ragulya, Science of Controlled Nonisothermal Synthesis and Sintering of Nanostructured Materials [in Russian], Author’s Abstract of ScD Thesis, Inst. Probl. Materialoved. NAN Ukrainy, Kiev (2002).
5. J. R. Groza and A. Zavaliangos, “Sintering activation by external electrical field,” Mater. Sci. Eng. A, 287, 171–177 (2000).10.1016/S0921-5093(00)00771-1 ↗
6. P. Angerer, L. G. Yu, K. A. Khorb, and G. Krumpel, “Spark-plasma sintering (SPS) of nanostructured and submicron titanium oxide powders,” Mater. Sci. Eng. A, 381, 16–19 (2004).10.1016/j.msea.2004.02.009 ↗
7. R. Orru, R. Licheri, A. M. Locci, et al., “Consolidation/synthesis of materials by electric current activated/assisted sintering,” Mater. Sci. Eng. R, 63, 127–287 (2009).10.1016/j.mser.2008.09.003 ↗
8. J. R. Groza, M. Garcia, and J. A. Schneider, “Surface effects in field-assisted sintering,” J. Mater. Res., 16, No. 1, 286–292 (2001).10.1557/JMR.2001.0043 ↗
9. A. V. Ragulya and V. V. Skorokhod, Consolidated Nanostructured Materials [in Russian], Naukova Dumka, Kiev (2007), p. 374.
10. J. H. Won, K. H. Kim, J. H. Chae, and K. B. Shim, “Sintering of attrition-milled TiN powders using a spark plasma sintering technique,” J. Ceram. Proc. Res., 3, No. 3, 166–170 (2002).
11. J. R. Groza, J. D. Curtis, and M. Kramer, “Field-assisted sintering of nanocrystalline titanium nitride,” J. Am. Ceram. Soc., 83, No. 5, 1281–283 (2000).10.1111/j.1151-2916.2000.tb01369.x ↗
12. S. Kawano, J. Takahashi, and S. Shimada, “Spark plasma sintering of nanosized TiN prepared from TiO2 by controlled hydrolysis of TiCl4 and Ti(O-i-C3H7)4 solution,” J. Am. Ceram. Soc., 86, No. 9, 1609–1611 (2003).10.1111/j.1151-2916.2003.tb03524.x ↗
13. O. B. Zgalat-Lozinskii, Structurization and Properties of Nanocomposites Based on Refractory Titanium, Aluminum, and Silicon Nitrides under Sintering at a Controlled Densification Rate [in Ukrainian], Inst. Probl. Materialoved. NAN Ukrainy, Kiev (2002).
14. ASTM Diffraction Data Card File, Joint Committee for Powder Diffraction Standards, Philadelphia (1977).
15. S. J. Gregg and K. S. W. Sing, Adsorption, Surface Area, and Porosity, 2nd ed., Academic Press, London (1982).
16. N. V. Kel’tsev, Bases of Adsorption Technique, Khimiya, Moscow (1984), p. 592.
17. T. G. Plachenov and S. D. Kolosentsev, Porometry, Khimiya, Leningrad (1988), p. 176.
18. S. I. Alyamovskii, Yu. G. Zainulin, and G. P. Shveikin, Oxycarbides and Oxynitrides of IVA and VA Subgroup Metals [in Russian], Nauka, Moscow (1981), p. 144.
19. J. R. Groza, “Field assisted sintering,” in: ASM Handbook, Vol. 7, Powder Metal Technologies and Applications, ASM International (1998), pp. 583–589.
20. V. Y. Kodash, J. R. Groza, K. C. Cho, et al., “Field-assisted sintering of Ni nanopowders,” Mater. Sci. Eng. A, 385, 367–371 (2004).10.1016/S0921-5093(04)00926-8 ↗
21. M. Omori, “Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS),” Mater. Sci. Eng. A, 287, 183–188 (2000).10.1016/S0921-5093(00)00773-5 ↗
22. R. Chaim, “Densification mechanisms in spark plasma sintering of nanocrystalline ceramics,” Mater. Sci. Eng. A, 443, 25–32 (2007).10.1016/j.msea.2006.07.092 ↗
23. K. Vanmeensel, A. Laptev, J. Hennicke, et al., “Modeling of the temperature distribution during field assisted sintering,” Acta Mater., 53, 4379–4388 (2005).10.1016/j.actamat.2005.05.042 ↗
24. D. M. Hulbert, A. Anders, D. V. Dudina, et al., “The absence of plasma in spark plasma sintering,” J. Appl. Phys., 104, 33305-1–33305-7 (2008).10.1063/1.2963701 ↗
25. A. I. Raichenko, Fundamentals of Powder Sintering with Electric Current [in Russian], Metallurgiya, Moscow (1987), p. 128.
26. X. Song, X. Liu, and J. Zhang, “Neck formation and self-adjusting mechanism of neck growth of conducting powders in spark plasma sintering,” J. Am. Ceram. Soc., 89, No. 2, 494–500 (2006).10.1111/j.1551-2916.2005.00777.x ↗