journal article·2018-09

The Properties of Cr–Co–Cu–Fe–Ni Alloy Films Deposited by Magnetron Sputtering

L. R. Shaginyan, V. F. Britun, N. A. Krapivka, S. A. Firstov, A. V. Kotko, V. F. Gorban

Powder Metallurgy and Metal Ceramics· Volume 57· Issue 5-6
Publisher page

Abstract

In spite of great efforts undertaken to produce and examine the properties of new high-entropy alloys (bulk or film alloys), the available information is still insufficient for creating scientific ideas that would connect the properties and process parameters of these alloys. We studied the dependence of the composition and structure of Co–Cr–Cu–Fe–Ni films deposited by magnetron sputtering on the physical parameter such as energy flux delivered to the growing film surface. This parameter is directly related to process parameters such as magnetron discharge current (Id) and substrate bias voltage (Ub). The films have a nanocrystalline microstructure and crystallize as a two-phase fcc and bcc solid solution with the following lattice parameters: a = 0.363 nm for the fcc phase and a = 0.294 nm for the bcc phase. Ion bombardment of the growing film induced by bias voltage Ub varying from 0 to –300 V in the substrate influences the film structure and composition. Thus, the films deposited at ~300 eV are noticeably depleted of copper, while the composition of the films deposited without ion bombardment is the same as that of the target. Greater energy flux delivered to the growth surface (higher Id and/or Ub in the substrate) increases the growth surface temperature, leading to grain coarsening and film texturing. The bcc phase also substantially decreases in volume, vanishing in the films deposited at Ub = –300 V. The films formed by the bombardment of ions with ≈100 eV energy showed the maximum (~19 GPa) microhardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. D. B. Miracle and O. N. Senkov, “A critical review of high entropy alloys and related concepts,” Acta Mater., 122, 448–511 (2017).10.1016/j.actamat.2016.08.081 ↗
2. A. D. Pogrebnyak, A. A. Bagdasaryan, I. V. Yakushchenko, and V. M. Bersenev, “Structure and properties of high-entropy alloys and associated coatings,” Usp. Khim., 83, No. 11, 1027–1061 (2014).10.1070/RCR4407 ↗
3. Yong Zhang, T-T. Zuo, and Zhi Tang, “Microstructures and properties of high-entropy alloys,” Prog. Mater. Sci., 61, 1–93 (2014).10.1016/j.pmatsci.2013.10.001 ↗
4. N. A. Krapivka, A. N. Myslyvchenko, and M. V. Karpets, “Base alloy concept in the development of high-entropy materials,” Powder Metall. Met. Ceram., 56, No. 9–10, 589–598 (2018).10.1007/s11106-018-9932-x ↗
5. C. Li, J. C. Li, M. Zhao, and Q. Jiang, “Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys,” J. Alloys Compd., 475, 752–757 (2009).10.1016/j.jallcom.2008.07.124 ↗
6. L. R. Shaginyan, J. G. Han, and N. V. Britun, “Effect of surface temperature on formation of low-temperature phase in magnetron-sputtered chromium films,” Jpn. J. Appl. Phys., 44, No. 5A, 3200–3204 (2005).10.1143/JJAP.44.3200 ↗
7. L. R. Shaginyan, S. A. Firstov, and I. F. Kopylov, “Condensation surface temperature as a means for studying film formation mechanisms,” Tech. Phys., 63, No. 4, 563–570 (2018).10.1134/S1063784218040187 ↗
8. L. R. Shaginyan, V. F. Gorban, N. A. Krapivka, et al., “Properties of coatings produced from the Al–Co–Cr–Cu–Fe–Ni–V high-entropy alloy by magnetron sputtering,” Sverkhtverd. Mater., No. 1, 33–44 (2016).
9. D. C. Tsai, F. S. Shieu, S. Y. Changet, et al., “Structures and characterizations of Ti–V–Cr and Ti–V–Cr–Zr–Y films deposited by magnetron sputtering under different bias powers,” J. Electrochem. Soc., 157, K52–K58 (2010).10.1149/1.3285047 ↗
10. P. K. Huang and J. W. Yeh, “Effects of substrate bias on structure and mechanical properties of (AlCrNbSiTiV)N coatings,” J. Phys. D: Appl. Phys., 42, 115401–115408 (2009).10.1088/0022-3727/42/11/115401 ↗
11. L. R. Shaginyаn, M. Misina, S. Kadlec, et al., “Mechanism of the film composition formation during magnetron sputtering of WTi,” J. Vac. Sci. Technol., A19, 2554–2560 (2001).10.1116/1.1392401 ↗
12. D. L. Smith, Thin Film Deposition, Second Ed., McGraw-Hill, New York (1997), p. 616.
13. K. S. Fancey, “A coating thickness uniformity model for physical vapor deposition systems,” Surf. Coat. Technol., 71, 16–29 (1995).10.1016/0257-8972(94)02298-5 ↗
14. K. Franzreb, A. Wucher, and H. Oechsner, “Characterization of the fluxes of neutral and positive (Agn and Cun, n ≥ 4) clusters produced by Ar sputtering,” Suppl. Z. Phys. D, 26, 101–103 (1993).10.1007/BF01425631 ↗
15. L. R. Shaginyan and J. G. Han, “Role of composition and type of film-forming species in formation of composition and structure of compound films,” Thin Solid Films, 458, 186–190 (2004).10.1016/j.tsf.2003.12.053 ↗
16. L. Shaginyan, J. G. Han, and H. M. Lee, “Structural nonuniformity and internal stress in chromium films deposited by magnetron sputtering,” Jpn. J. Appl. Phys., 43, No. 5A, 2594–2601 (2004).10.1143/JJAP.43.2594 ↗
17. Y. J. Hsu, W. C. Chiang, and J. K. Wu, “Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution,” Mat. Chem. Phys., 92, 112–117 (2005).10.1016/j.matchemphys.2005.01.001 ↗
18. S. M. Oh and S. I. Hong, “Microstructural stability and mechanical properties of equiatomic CoCrCuFeNi, CrCuFeMnNi, CoCrCuFeMn alloys,” Mat. Chem. Phys., 210, 120–125 (2018).10.1016/j.matchemphys.2017.09.010 ↗
19. U. Dahlborga, J. Cornidea, M. Calvo-Dahlborga, et al., “Crystalline structures of some high entropy alloys obtained by neutron and X-ray diffraction,” Acta Phys. Pol. A, 128, No. 4, 552–556 (2015).10.12693/APhysPolA.128.552 ↗
20. L. R. Shaginyan, S. A. Firstov, N. A. Krapivka, and S. N. Dub, “The reasons for strengthening of film materials,” in: Proc. Int. Conf. Nanomaterials: Applications and Properties, 5, No. 1, 01NTF01–01NTF08 (2016).
21. P. Patsalas, C. Charitidis, and S. Logothetidis, “The effect of substrate temperature and bias on mechanical properties of sputtered TiN films,” Surf. Coat. Technol., 125, 335–340 (2000).10.1016/S0257-8972(99)00606-4 ↗