Multicriterion Assessment of Wear Resistance of Fe–Mn–C–B Eutectic Coatings Alloyed with Si, Ni, and Cr
Source abstract
Abstract
The results of tribological studies on Fe–Mn–C–B eutectic coatings alloyed with Si, Ni, and Cr are presented. The coatings are produced by gas metal arc welding with use of powder wires (2.4 mm in diameter). Multicriterion assessment is used to analyze the tribological properties of the coatings and determine the most wear-resistant one. This assessment involves first a search of Pareto optimum solutions and then compromise solutions with use of the Chebyshev norm. This approach allows choosing the coating that shows the highest abrasive wear resistance among the six eutectic materials under study at a specific load varying from 3 to 15 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. E. Badisch, C. Katsich, H. Winkelmann, et al., “Wear behavior of hardfaced Fe–Cr–C alloy and austenitic steel under 2-body and 3-body conditions at elevated temperature,” Tribol. Int., 43, No. 7, 1234–1244 (2010).10.1016/j.triboint.2010.01.008 ↗
2. M. I. Pashechko, “Wear resistance of eutectic coatings of the Fe–Mn–C–B system alloyed with Si, Ni, and Cr,” Mater. Sci., 46, No. 5, 695–701 (2011).10.1007/s11003-011-9342-4 ↗
3. M. V. Kindrachuk, “Thermodynamics of oxidation and tribological analysis of eutectic coatings,” Mater. Sci., 31, No. 2, 273–277 (1996).10.1007/BF00558650 ↗
4. M. I. Pashechko, G. S. Ershov, K. Lenik, et al., “Eutectic-gradient wear resistance in materials,” Powder Metall. Met. Ceram., 38, No. 7–8, 340–343 (1999).10.1007/BF02676166 ↗
5. G. S. Fox-Rabinovich and G. E. Totten, Self-organization during Friction, Advance Surface Engineered Materials and Systems Design, CRC Taylor and Francis Group, Boca Raton (2006), p. 458.10.1201/9781420017861 ↗
6. G. S. Fox-Rabinovich, A. I. Kovalev, L. Sh. Shuster, et al., “On characteristic features of alloying HSS-based deformed compound powder materials with consideration for tool self-organization at cutting. II. Cutting tool friction control due to the alloying of the HSS-based deformed compound powder material,” Wear, 214, 279–286 (1998).10.1016/S0043-1648(97)00157-9 ↗
7. V. G. Novytskyi, V. P. Havryliuk, and D. D. Panasenko, “Effect of tin on the wear resistance and secondary structure of cast composites of the Fe–Cr–Cu–Ti–C system under sliding friction,” Met. Sci. Heat Treat., No. 49, 346–353 (2007).10.1007/s11041-007-0063-0 ↗
8. M. Pashechko and K. Lenik, “Segregation of atoms of the eutectic alloy Fe–Mn–C–B–Si–Ni–Cr at friction wear,” Wear, 267, Nos. 5–8, 1301–1304 (2009).10.1016/j.wear.2009.03.010 ↗
9. M. I. Pashechko, K. Dziedzic, and M. Barszcz, “Study of the structure and properties of wear-resistant eutectic Fe–Mn–C–B–Si–Ni–Cr coatings,” Powder Metall. Met. Ceram., 52, No. 7–8, 469–476 (2013).10.1007/s11106-013-9549-z ↗
10. A. Klimpel, Surfacing and Thermal Spraying [in Polish], Wydawnictwo Naukowo-Techniczne, Warsaw (2000), p. 470.
11. M. I. Pashechko and J. Montusiewicz, “Evaluation of the wear resistance of eutectic coatings of the Fe–Mn–C–B system alloyed by Si, Ni, and Cr using multi-criterion analysis,” Mater. Sci., 47, No. 6, 813–821 (2012).10.1007/s11003-012-9460-7 ↗