journal article·2016-01

Vortices in Noncompact Blanks During Twist Extrusion

D. V. Pavlenko, Ya. E. Beygel’zimer

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 9-10
Publisher page

Abstract

The causes and consequences of the formation of multifractal vortices during severe plastic deformation of powder and porous bodies by twist extrusion are analyzed. It is demonstrated that the developed pore space in noncompact blanks leads to the formation of self-similar vortices at different scales. It is established that the multifractal vortices occurring during simple shear in twist extrusion, are responsible for the differences in the mechanisms of hardening of compact and noncompact materials. Being significantly increased (in comparison with the concentric streamlines during deformation of compacted materials), the integral deformation path intensifies the accommodation of particles of a mixture of powder components. In addition, the vortices cause intensive mixing and mass transfer at both micro and macro scales. The intensive mass transfer leads to chemical and structural homogenization and elimination of porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Granular flow and fluidized beds · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. F. Z. Utyashev, “Deformation methods to produce nanostructured materials and their applicability in the aircraft industry and engine engineering,” Avia-Kosm. Tekh. Tekhnol., No. 10 (67), 7–11 (2009).
2. Yu. V. Mil’man, “Mechanical behavior of nanocrystalline and quasi-nanocrystalline materials,” Nanotekhnol.: Nauka Proizv., No. 2 (3), 16–22 (2009).
3. Ya. Beygel’zimer, A. I. Shevelev, and S. G. Synkov, “Possibilities for compacting specimens of aluminum turnings by screw extrusion,” Powder Metall. Met. Ceram., 43, Nos. 11–12, 549–551 (2004).10.1007/s11106-005-0020-7 ↗
4. S. G. Synkov, Ya. Beygel’zimer, and A. I. Shevelev, “Pressing rods of aluminum alloy cuttings,” Met. Lit. Ukrainy, Nos. 9–10, 48–50 (2003).
5. N. M. Rusin, “Study of plastic flow features at the macroscopic level in powder bodies during equalchannel angular pressing,” Perspekt. Mater., No. 4, 83–91 (2007).
6. A. P. Maydanyuk, L. A. Ryabicheva, M. B. Shtern, and G. A. Baglyuk, “Evolution of the density distribution during equal-channel angular pressing of porous blanks,” Visn. Skhidnoukr. Nats. Univ. im. Volodymyra Dalya, Part 1, No. 6 (124), 212–216 (2008).
7. G. A. Baglyuk, “Improving the efficiency of porous blanks by intensification of shear deformation,” in: Academic Notes on Engineering Mechanics [in Ukrainian], Issue 24, Luts’k (2009), pp. 35–48.
8. R. D. Haghighi, A. J. Jahromi, and B. E. Jahromi, “Simulation of aluminum powder in tube compaction using equal channel angular extrusion,” J. Mater. Eng. Perform., 21, No. 2, 143–152 (2011).10.1007/s11665-011-9896-1 ↗
9. A. V. Dobromyslov and R. V. Churbaev, “Synthesis of nanocrystalline and amorphous alloys from elemental powders by intensive plastic deformation under high pressure,” Int. J. Modern Phys. B, 24, Nos. 6–7, 722–729 (2010).10.1142/S0217979210064344 ↗
10. Ya. Beygel’zimer, V. N. Varyukhin, S. G. Synkov, et al., “Vortices and mixing during twist extrusion,” Path to access: hunch.net/~yan/talks/vortex.at.te.ppt.
11. Ya. Beygel’zimer, “Simple shear of metals: what is it?” Fiz. Techn. Vys. Davl., 20, No. 4, 40–52 (2010).
12. Ya. Beygel’zimer and N. M. Lavrinenko, “The stability of structures during simple and pure shear,” in: Academic Notes [in Ukrainian], Issue 39, Luts’k (2011), pp. 8–12.
13. Ya. Beygel’zimer, “Vortices and mixing in metals during severe plastic deformation,” Mater. Sci. Forum, 683, 213–224 (2011).10.4028/www.scientific.net/MSF.683.213 ↗
14. Ya. Beygel’zimer and A. Reshetov, “Twist extrusions plus spread extrusion = spatial uniformity,” in: Proc. Ultrafine Grained Materials IV. TMS 2006 Annual Meeting (San Antonio, TX, USA, March 12–16, 2006) (2006), pp. 119–124.
15. Ya. Beygel’zimer and N. M. Lavrinenko, “Perfect plasticity of metals under simple shear as the result of percolation transition on grain boundaries,” Path to access: arxiv.org/pdf/1206.5055.
16. Ya. Beygel’zimer, V. N. Varyukhin, D. V. Orlov, and S. G. Synkov, Twist Extrusion as a Deformation-Accumulation Process [in Russian], TEAN, Donetsk (2003), p. 87.
17. V. V. Stolyarov, “Deformation methods of structure grinding,” Vest. N.-T. Razv., No. 4 (68), 29–35 (2013).
18. Ya. Beygel’zimer, V. Varyukhin, S. Synkov, and D. Orlov, “Useful properties of twist extrusion,” Mater. Sci. Eng., A 503, 14–17 (2009).10.1016/j.msea.2007.12.055 ↗
19. J. Feder, Fractals, Plenum Press, New York (1988). .10.1007/978-1-4899-2124-6 ↗
20. D. V. Pavlenko, “Material science aspects of resource-saving technology for producing titanium semifinished products,” Tekhnol. Sistemy, No. 4 (65), 21–29 (2013).
21. V. E. Ol’shanetskii, L. P. Stepanova, D. V. Tkach, and D. V. Pavlenko, “On the formation of crystallographic texture in VT1-0 titanium during twist extrusion,” Metalloved. Term. Obrab. Metal., No. 11, 29–33 (2013).
22. H. Gleiter, “Nanostructured materials: basic concepts and microstructure,” Acta Mater., No. 48, 1–29 (2000).