Processing and properties of highly porous 17-4 PH stainless steel
Source abstract
Abstract
Highly porous 17-4 PH stainless steel having porosities in the range of 39–82% with an average pore size of around 700 μm was successfully fabricated using space holder technique in powder metallurgy. Irregular carbamide particles were used as a space holder material. The final porosity was directly related to the added fraction of carbamide. The specimens were sintered at either 1300°C or 1350°C for times of 60 and 90 min in hydrogen atmosphere. In this porosity range, Young’s modulus and compressive strength of the specimens before aging treatment found to be in the range of 0.17–5.34 GPa and 24–290 MPa, respectively and decreased with increasing porosity. 0.5 wt.% boron addition to the 17-4 PH steel powders lowered the sintering temperature and time. The relationship between the mechanical properties and the relative density of porous 17-4 PH steel was found to obey the power law relation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. M. F. Ashby, A. Evans, N. A. Fleck, et al., Metal Foams: A Design Guide, Elsevier Science, Boston, MA (2000).
2. M. Bram, C. Stiller, H. P. Buckramed, et al., “High-porosity titanium, stainless steel, and superalloy parts,” Advanced Engineering Materials, 2, No. 4, 196–199 (2000).10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO;2-K ↗
3. J. Banhart, “Manufacture, characterisation and application of cellular metals and metal foams,” Progress in Materials Science, Vol. 46, No. 6, 559–632 (2001).10.1016/S0079-6425(00)00002-5 ↗
4. H. P. Degisher, B. Kriszt, Handbook of Cellular Metals, Wiley-VCH, Weinheim (2002), p. 313.10.1002/3527600558 ↗
5. W. Niu, C. Bai, G. Qiu, Q. Wang, “Processing and properties of porous titanium using space holder technique,” Materials Science and Engineering A, No. 506, 148–151 (2009).
6. H. I. Bakan, “A Novel water leaching and sintering process for manufacturing highly porous stainless steel,” Scripta Materialia, 55, 203–206 (2006).10.1016/j.scriptamat.2006.03.039 ↗
7. A. Laptev, M. Bram, H. P. Buchkremer, D. Stover, “Study of production route for titanium parts combining very high porosity and complex shape,” Powder Metallurgy, 47, 85–92 (2004).10.1179/003258904225015536 ↗
8. D. C. Dunand, “Adv. Eng. Mater.,” No. 6, 369 (2004).
9. C. E. Wen, M. Mabuchi, Y. Yamada, “Processing of biocompatible porous Ti and Mg,” Scripta Materialia, 45, 1147–1153 (2001).10.1016/S1359-6462(01)01132-0 ↗
10. N. Tuncer, G. Arslan, “Designing compressive properties of titanium foams,” J. Mater Sci., 44, 1477–1484 (2009).10.1007/s10853-008-3167-z ↗
11. H. O. Gulsoy, R. M. German, “Sintered foams from precipitation hardened stainless steel powder,” Powder Metallurgy, 51, No. 4 (2008).10.1179/174329008X286703 ↗
12. H. O. Gulsoy, S. Salman, S. Ozbek, F. Findik, “Sintering of a Boron-doped injection moulded 17-4 PH stanless steel,” J. Mater Sci., 40, 4101–4104 (2005).10.1007/s10853-005-0777-6 ↗
13. H. I. Bakan, D. Heaney, R. M. German, “Effect of Nickel Boride and Boron additions on sintering characteristics of injection moulded 316L powder using water soluble binder system,” Powder Metallurgy, 44, No. 3, 235–242, (2001).10.1179/003258901666392 ↗
14. L. J. Gibson, M. F. Ashby, Cellular Solids–Structures and Properties, University Press, Cambridge (1997).10.1017/CBO9781139878326 ↗