Study of Al2O3 and SiC Effect on Sintering and Mechanical Properties of Hybrid Al-Based Composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. X.M. Zhu, J.K. Yu, and X.Y. Wang, “Microstructure and properties of Al/Si/SiC composites for electronic packaging,” Trans. Nonferrous Met. Soc. China, 22, 1686–1692 (2012), https://doi.org/10.1016/S1003-6326(11)61374-5.10.1016/S1003-6326(11)61374-5 ↗
2. M. Rahimian, N. Parvin, and N. Ehsani, “The effect of production parameters on microstructure and wear resistance of powder metallurgy Al–Al2O3 composite,” Mater. Des., 32, 1031–1038 (2011), https://doi.org/10.1016/j.matdes.2010.07.016.10.1016/j.matdes.2010.07.016 ↗
3. A. Bhadauria, L.K. Singh, S.K. Nayak, and T. Laha, “Tensile deformation behavior and strengthening mechanism in graphene nanoplatelet reinforced bimodal grained aluminum nanocomposite synthesized by spark plasma sintering and hot rolling,” Mater. Charact., 168, 110568 (2020), https://doi.org/10.1016/j.matchar.2020.110568.10.1016/j.matchar.2020.110568 ↗
4. A. Bhadauria, S. Bajpai, A. Tiwari, S.K. Mishra, A. Nisar, S. Dubey, N. Chavan, A.K. Keshri, and K. Balani, “Bimodal microstructure toughens plasma sprayed Al2O3–8YSZ–CNT coatings,” Ceram. Int., 49, 12348–12359 (2023), https://doi.org/10.1016/j.ceramint.2022.12.092.10.1016/j.ceramint.2022.12.092 ↗
5. H. Alrobei, “Effect of different parameters and aging time on wear resistance and hardness of SiC–B4C reinforced AA6061 alloy,” J. Mech. Sci. Technol., 34, 2027–2034 (2020), https://doi.org/10.1007/s12206-020-0424-9.10.1007/s12206-020-0424-9 ↗
6. V. Mohanavel, K.S.A. Ali, S. Prasath, T. Sathish, and M. Ravichandran, “Microstructural and tribological characteristics of AA6351/Si3N4 composites manufactured by stir casting,” J. Mater. Res. Technol., 9, 14662–14672 (2020), https://doi.org/10.1016/j.jmrt.2020.09.128.10.1016/j.jmrt.2020.09.128 ↗
7. D. Srinivasan, M. Meignanamoorthy, A. Gacem, M. Vinayagam, T. Sathish, M. Ravichandran, S.K. Srinivasan, M.H. Abdellattif, and H.L. Allasi, “Tribological behavior of Al/nanomagnesium/aluminum nitride composite synthesized through liquid metallurgy technique,” J. Nanomater, 1–12 (2022), https://doi.org/10.1155/2022/7840939.10.1155/2022/7840939 ↗
8. Y.A. Kurganova, A.G. Kolmakov, Itszin' Chen', and S.V. Kurganov, “Study of mechanical characteristics of advanced aluminum-matrix composites reinforced with SiC and Al2O3,” Inorg. Mater. Appl. Res., 13, 157–160 (2022), https://doi.org/10.1134/S2075113322010245.10.1134/S2075113322010245 ↗
9. G.B.V. Kumar, C.S.P. Rao, N. Selvaraj, and M.S. Bhagyashekar, “Studies on Al6061-SiC and Al7075–Al2O3 metal matrix composites,” J. Miner. Mater. Charact. Eng., 9, No. 1, 43–55 (2010), https://doi.org/10.4236/jmmce.2010.91004.10.4236/jmmce.2010.91004 ↗
10. P. Ashwath and M.A. Xavior, “Processing methods and property evaluation of Al2O3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys,” J. Mater. Res., 31, 1201–1219 (2016), https://doi.org/10.1557/jmr.2016.131.10.1557/jmr.2016.131 ↗
11. K.M. Shorowordi, T. Laoui, A.S.M.A. Haseeb, J.P. Celis, and L. Froyen, “Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study,” J. Mater. Process. Technol., 142, Issue 3, 738–743 (2003), https://doi.org/10.1016/S0924-0136(03)00815-X.10.1016/S0924-0136(03)00815-X ↗
12. S. Bajpai, P. Setia, A. Bhadauria, T. Venkateswaran, and K. Balani, “Mechanical and high-temperature oxidation behavior of HfB2–ZrB2–SiC–B4C–CNT composites joined with and without Ni interlayer,” Ceram. Int., 48, Issue 21, 31827–31842 (2022), https://doi.org/10.1016/j.ceramint.2022.07.112.10.1016/j.ceramint.2022.07.112 ↗
13. J. Zhang, T. Zhu, S. Sang, Y. Li, L. Pan, N. Liao, X. Liang, Q. Wang, Z. Xie, and J. Dai, “Microstructural evolution and mechanical properties of ZrO2 (3Y)–Al2O3–SiC(w) ceramics under oscillatory pressure sintering,” Mater. Sci. Eng. A, 819, 141445 (2021), https://doi.org/10.1016/j.msea.2021.141445.10.1016/j.msea.2021.141445 ↗
14. M.B.A. Shuvho, M.A. Chowdhury, M. Kchaou, A. Rahman, and M.A. Islam, “Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles,” Chem. Data Collect., 28, 100442 (2020), https://doi.org/10.1016/j.cdc.2020.100442.10.1016/j.cdc.2020.100442 ↗
15. A. Bhadauria, L.K. Singh, and T. Laha, “Combined strengthening effect of nanocrystalline matrix and graphene nanoplatelet reinforcement on the mechanical properties of spark plasma sintered aluminum based nanocomposites,” Mater. Sci. Eng. A, 749, 14–26 (2019), https://doi.org/10.1016/j.msea.2019.02.007.10.1016/j.msea.2019.02.007 ↗
16. L.K. Singh, A. Bhadauria, and T. Laha, “Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix,” Powder Technol., 356, 1059–1076 (2019), https://doi.org/10.1016/j.powtec.2019.09.026.10.1016/j.powtec.2019.09.026 ↗
17. O. Guillon, J.G. Julian, B. Dargatz, T. Kessel, G. Schierning, J. Räthel, and M. Herrmann, “Field-assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments,” Adv. Eng. Mater., 16, 830–849 (2014), https://doi.org/10.1002/adem.201300409.10.1002/adem.201300409 ↗
18. R.S. Maurya, A. Sahu, and T. Laha, “Effect of sintering temperature on phase transformation during consolidation of mechanically alloyed Al86Ni6Y6Co2 amorphous powders by spark plasma sintering,” J. Non. Cryst. Sol., 453, 1–7 (2016), https://doi.org/10.1016/j.jnoncrysol.2016.09.018.10.1016/j.jnoncrysol.2016.09.018 ↗
19. R.S. Maurya, A. Sahu, and T. Laha, “Effect of consolidation pressure on phase evolution during sintering of mechanically alloyed Al86Ni8Y6 amorphous powders via spark plasma sintering,” Mater. Sci. Eng. A, 649, 48–56 (2016), https://doi.org/10.1016/j.msea.2015.09.109.10.1016/j.msea.2015.09.109 ↗
20. G.B. Yadhukulakrishnan, A. Rahman, S. Karumuri, M.M. Stackpoole, A.K. Kalkan, R.P. Singh, and S.P. Harimkar, “Spark plasma sintering of silicon carbide and multiwalled carbon nanotube reinforced zirconium diboride ceramic composite,” Mater. Sci. Eng. A, 552, 125–133 (2012), https://doi.org/10.1016/j.msea.2012.05.020.10.1016/j.msea.2012.05.020 ↗
21. S.S. Deng, D.J. Wang, Q. Luo, Y.J. Huang, and J. Shen, “Spark plasma sintering of gas atomized AlNiYLaCo amorphous powders,” Adv. Powder Technol., 26, 1696–1701 (2015), https://doi.org/10.1016/j.apt.2015.10.009.10.1016/j.apt.2015.10.009 ↗
22. B.L. Madej, D. Garbiec, and M. Madej, “Effect of sintering temperature on microstructure and selected properties of spark plasma sintered Al–SiC composites,” Vacuum. 164, 250–255 (2019), https://doi.org/10.1016/j.vacuum.2019.03.033.10.1016/j.vacuum.2019.03.033 ↗
23. N. Saheb, M. Shahzeb Khan, and A.S. Hakeem, “Effect of processing on mechanically alloyed and spark plasma sintered Al–Al2O3 nanocomposites,” J. Nanomater., 1–13 (2015), https://doi.org/10.1155/2015/609824.10.1155/2015/609824 ↗
24. A. Bhadauria, L.K. Singh, and T. Laha, “Effect of physio-chemically functionalized graphene nanoplatelet reinforcement on tensile properties of aluminum nanocomposite synthesized via spark plasma sintering, J. Alloys Compd., 748, 783–793 (2018), https://doi.org/10.1016/j.jallcom.2018.03.186.10.1016/j.jallcom.2018.03.186 ↗
25. K.K. Sadhu, N. Mandal, and R.R. Sahoo, “SiC/graphene reinforced aluminum metal matrix composites prepared by powder metallurgy: A review,” J. Manuf. Proc., 91, 10–43 (2023), https://doi.org/10.1016/j.jmapro.2023.02.026.10.1016/j.jmapro.2023.02.026 ↗
26. X.P. Li, C.Y. Liu, M.Z. Ma, and R.P. Liu, “Microstructures and mechanical properties of AA6061–SiC composites prepared through spark plasma sintering and hot rolling,” Mater. Sci. Eng. A, 650, 139–144. (2016), https://doi.org/10.1016/j.msea.2015.10.015.10.1016/j.msea.2015.10.015 ↗
27. P. Singh, R. Walia, and C.S. Jawalkar, “A comprehensive review study on aluminum-based hybrid composites with organic and inorganic reinforcements,” Sādhanā, 48, 1–29 (2023), https://doi.org/10.1007/s12046-023-02093-4.10.1007/s12046-023-02093-4 ↗
28. X.P. Li, C.Y. Liu, X.W. Sun, M.Z. Ma, and R.P. Liu, “Hot deformation behavior and processing maps of AA6061–10 vol.% SiC composite prepared by spark plasma sintering,” Sci. China Technol. Sci., 59, 980–988 (2016), https://doi.org/10.1007/s11431-016-6063-9.10.1007/s11431-016-6063-9 ↗
29. F.T.L. Muniz, M.A.R. Miranda, C. Morilla, Dos Santos, and J.M. Sasaki, “The Scherrer equation and the dynamical theory of X-ray diffraction,” Acta Cryst. Sec. A Found Adv., 72, 385–390 (2016), https://doi.org/10.1107/S205327331600365X.10.1107/S205327331600365X ↗
30. G.Z. Voyiadjis and M. Yaghoobi, “Discrete dislocation dynamics,” Size Eff. Plast., 233–273 (2019), https://doi.org/10.1016/B978-0-12-812236-5.00004-9.10.1016/B978-0-12-812236-5.00004-9 ↗
31. A. Sahu, R.S. Maurya, and T. Laha, “Effect of sintering temperature on phase evolution of Al86Ni6Y4.5Co2La1.5 bulk amorphous composites synthesized via mechanical alloying and spark plasma sintering,” Prog. Nat. Sci. Mater. Int., 29, 32–40 (2019), https://doi.org/10.1016/j.pnsc.2019.01.009.10.1016/j.pnsc.2019.01.009 ↗
32. R.M. German, “Coarsening in sintering: grain shape distribution, grain size distribution, and grain growth kinetics in solid-pore systems,” Crit. Rev. Solid State Mater. Sci., 35, 263–305 (2010), https://doi.org/10.1080/10408436.2010.525197.10.1080/10408436.2010.525197 ↗
33. X. Zheng, M. Zhou, Y. Zhang, J. Huang, Y. Li, H. Zhu, S. Tang, D. Li, S. Liang, B. Tian, Y. Liu, X. Li, Y. Jia, and A.A. Volinsky, “Microstructure and electrical contact behavior of Al2O3–Cu/30W3SiC(0.5Y2O3) composites,” J. Mater. Res. Technol., 22, 2158–2173 (2023), https://doi.org/10.1016/j.jmrt.2022.12.071.10.1016/j.jmrt.2022.12.071 ↗
34. A. Prasad, M. Dao, and S. Suresh, “Steady-state frictional sliding contact on surfaces of plastically graded materials,” Acta Mater., 57, 511–524 (2009), https://doi.org/10.1016/j.actamat.2008.09.036.10.1016/j.actamat.2008.09.036 ↗
35. R. AM, M. Kaleemulla, S. Doddamani, and B. KN, “Material characterization of SiC and Al2O3-reinforced hybrid aluminum metal matrix composites on wear behavior,” Adv. Compos. Lett., 28 (2019), https://doi.org/10.1177/0963693519856356.10.1177/0963693519856356 ↗
36. N. Kumar, G. Gautam, R.K. Gautam, A. Mohan, and S. Mohan, “Wear, friction and profilometer studies of in-situ AA5052/ZrB2 composites,” Tribol. Int., 97, 313–326 (2016), https://doi.org/10.1016/j.triboint.2016.01.036.10.1016/j.triboint.2016.01.036 ↗
37. L.J. Yang, “Wear coefficient equation for aluminum-based matrix composites against steel disc,” Wear, 255, 579–592 (2003), https://doi.org/10.1016/S0043-1648(03)00191-1.10.1016/S0043-1648(03)00191-1 ↗
38. G.J. Gore and J.D. Gates, “Effect of hardness on three very different forms of wear,” Wear, 203–204, 544–563 (1997), https://doi.org/10.1016/S0043-1648(96)07414-5.10.1016/S0043-1648(96)07414-5 ↗
39. T. Satish Kumar, T. Thankachan, J. Giri, E. Makki, R. Dhanasekar, and A. Guru, “Microstructural characterization of in-situ MgAl2O4 nanoparticles reinforced Al–2Mg–1Si composite produced using the ultrasonic assisted stir casting process,” J. Mater. Res. Technol., 29, 2458–2467 (2024), https://doi.org/10.1016/j.jmrt.2024.01.254.10.1016/j.jmrt.2024.01.254 ↗
40. G. Manohar, K.M. Pandey, and S.R. Maity, “Effect of variations in microwave processing temperatures on microstructural and mechanical properties of AA7075/SiC/graphite hybrid composite fabricated by powder metallurgy techniques,” Silicon, 14, 7831–7847 (2022), https://doi.org/10.1007/s12633-021-01554-x.10.1007/s12633-021-01554-x ↗
41. C. Suryanarayana, “Synthesis of nanocomposites by mechanical alloying,” J. Alloys Compd., 509, S229–S234 (2011), https://doi.org/10.1016/j.jallcom.2010.09.063.10.1016/j.jallcom.2010.09.063 ↗