journal article·2018-11

Diffusion Porosity in Films of Impregnated M-Type WBa Thermionic Cathodes and its Influence on Cathode Emission Characteristics

O. I. Hetman, L. M. Kapitanchuk

Powder Metallurgy and Metal Ceramics· Volume 57· Issue 7-8
Publisher page

Abstract

The paper examines how the emission characteristics of impregnated M-type cathodes depend on variation in the film composition and structure in the cathode operation process. Diffusion porosity has been established to appear in the 49.5% Os–49.5% Ir–1% Al and 50% Os–50% W films, and its influence on the emission characteristics of the M-type cathodes has been studied. It is assumed that the diffusion porosity decreases the M-type cathode work function because the total emitting area of the film increases and promotes faster delivery of barium and its compounds to the emitting layer through mass transfer facilitated by both Knudsen flow of atoms through pores and surface diffusion along pore walls. Degradation in the emission characteristic of the M-type cathode is due to the film structural failure. The experiments confirm the existence of three-dimensional barium-containing crystallites on the emitting surface of the M-type WBa cathode film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Ammonia Synthesis and Nitrogen Reduction · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A. D. Smigelskas and E. O. Kirkendall, “Zinc diffusion in alpha brass,” Trans. AIME, 171, 130–142 (1947).
2. Ya. E. Geguzin, Physics of Sintering [in Russian], Nauka, Moscow (1967), p. 360.
3. Ya. E. Geguzin, Diffusion Zone [in Russian], Nauka, Moscow (1979), p. 343.
4. V. V. Skorokhod and S. M. Solonin, Physical Metallurgy Fundamentals of Powder Sintering [in Russian], Metallurgiya, Moscow (1984), p. 159.
5. Ya. E. Geguzin, “Diffusion porosity in metals and alloys,” Usp. Fiz. Nauk, LXI, No. 2, 217–247 (1957).10.3367/UFNr.0061.195702c.0217 ↗
6. L. N. Paritskaya, “Kirkendall effect: dramatic history of discovery and developments,” Defect Diffus. Forum, 249, 73–80 (2006).10.4028/www.scientific.net/DDF.249.73 ↗
7. Ya. E. Geguzin, Yu. I. Boiko, and L. N. Paritskaya, “On experimental separation of the Frenkel and Kirkendall effects,” Dokl. Akad. Nauk SSSR, 173, No. 2, 323–324 (1967).
8. O. I. Get’man and V. V. Skorokhod, “Structural engineering of impregnated dispenser cathodes,” Powder Metall. Met. Ceram., 53, No. 11–12, 701–721 (2015).10.1007/s11106-015-9666-y ↗
9. P.A. Zalm and A.J.A. Van Stratum, “Osmium dispenser cathodes,” Philips Tech. Rev., 27, No. 3–4, 69–75 (1966).
10. R. Cortenraad, A.W. Denier van der Gon, et al., “Surface analysis of thermionic dispenser cathodes,” Appl. Surf. Sci., 191, 153–165 (2002).10.1016/S0169-4332(02)00175-7 ↗
11. Herbert B. Michaelson, “The work function of the elements and its periodicity,” J. Appl. Phys., 48, 4729–4733 (1977).10.1063/1.323539 ↗
12. R. E. Thomas and J.W. Gibson, “Work function variation versus alloy concentration for dispenser cathodes,” Appl. Surf. Sci., 29, 49–66 (1987).10.1016/0169-4332(87)90015-8 ↗
13. A. S. Gilmour Jr., Principles of Traveling Wave Tubes, Artech House, Norwood (1994).
14. Yu. V. Gurkov and A. V. Druzhinin, “Emission parameters of osmium-plated impregnated dispenser thermionic cathode,” Izv. Akad. Nauk SSSR. Ser. Fiz., 43, No. 9, 1850–1854 (1979).
15. A. P. Makarov, O. K. Kultashev, et al., “Performance principles and ageing of osmium-plated dispenser cathode,” Radiotekh. Elektron., 36, No. 11, 2196–2201 (1991).
16. D. Brion, J. C. Tonnerre, and A. M. Shroff, “Auger spectroscopy investigations of various types of impregnated cathodes,” Appl. Surf. Sci., 16, 55–72 (1983).10.1016/0378-5963(83)90059-4 ↗
17. C. S. Fang, W. S. Tse, and C. E. Maloney, “Re/Ir/W and Os/Ir/W alloy coatings on impregnated tungsten cathodes,” Appl. Surf. Sci., 33–34, 1189–1199 (1988).10.1016/0169-4332(88)90434-5 ↗
18. S. S. Brenner, “The thermal rearrangement of field-evaporated iridium surfaces,” Surf. Sci., 2, 496–508 (1964).10.1016/0039-6028(64)90092-5 ↗
19. G. Antczak, M. Blaszczyszyn, and R. Blaszczyszyn, “Surface self-diffusion of iridium: field electron emission study,” Acta Phys. Pol. A, 98, No. 4, 383–388 (2000).10.12693/APhysPolA.98.383 ↗
20. D. W. Bassett and M. J. Parsley, “Field ion microscope studies of transition metal adatom diffusion on (110), (211) and (321) tungsten surfaces,” J. Phys. D: Appl. Phys., 3, No. 5, 707–719 (1970).10.1088/0022-3727/3/5/309 ↗
21. P. D. Swartzentruber, T. J. Balk, et al., “Direct work function measurement of activated M-type dispenser cathodes,” in: Proc. Vacuum Electronics Conference, IEEE International (2014), pp. 135–136.
22. P. Swartzentruber, T. J. Balk, and S. Roberts, “Influence of Os–Ru coating on closed-space diode tests of M-type dispenser cathodes,” in: Proc. Vacuum Electronics Conference (IVEC), IEEE International (2011), pp. 401–402.
23. P. D. Swartzentruber, Wen-Chung Li, et al., “Optimizing osmium–ruthenium films to inhibit tungsten interdiffusion,” in: Proc. Vacuum Electronics Conference (IVEC), IEEE International (2010), pp. 73–74.
24. P. D. Swartzentruber, T. J. Balk, et al., “Microstructural influence of OsRu thin films on dispenser cathodes,” in: Proc. Vacuum Electronics Conference (IVEC), IEEE International (2012), pp. 163–164.
25. P. D. Swartzentruber, “Microstructure and work function of dispenser cathode coatings: effects on thermionic emission,” in: Theses and Dissertations—Chemical and Materials Engineering, https://uknowledge.uky.edu/cme_etds/41 (2014).
26. Yu. V. Gurkov, A. V. Druzhinin, T. A. Kupriyanova, et al., “Emission microscopy and electron microprobe analysis of the dispenser cathode surface,” Izv. Akad. Nauk SSSR. Ser. Fiz. 38, No. 11, 2270–2274 (1974).
27. B. Ch. Dyubua, A. G. Mikhalchenkov, et al., “Effect of the surface structure of dispenser cathodes on their emission properties,” Elektron. Tekh. Ser. 1. Elektron. SVCh, No. 1, 25–34 (2010).