journal article·2024-09

Advanced Approaches for Producing Nanocrystalline and Fine-Grained ZrO2-Based Powders(Review) I. Mechanical, Physical, and Chemical Methods (Excluding ‘Wet’ Chemistry)

O. V. Dudnik, S. M. Lakiza, I. O. Marek, V. P. Red’ko, A. O. Makudera, O. K. Ruban

Powder Metallurgy and Metal Ceramics· Volume 63· Issue 5-6
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. J. Chevalier, Al. Liens, H. Reveron, F. Zhang, P. Reynaud, Th. Douillard, L. Preiss, V. Sergo, V. Lughi, M. Swain, and N. Courtois, “Forty years after the promise of ‘ceramic steel’: zirconia-based composites with a metal-like mechanical behavior,” J. Am. Ceram. Soc., 103, 1482–1513 (2020), https://doi.org/10.1111/jace.16903.10.1111/jace.16903 ↗
2. R.H.J. Hannink, M.K. Patrick, and C.M. Barry, “Transformation toughening in zirconia-containing ceramics,” J. Am. Ceram. Soc., 83, No. 3, 461–487 (2000).10.1111/j.1151-2916.2000.tb01221.x ↗
3. A.V. Shevchenko, A.K. Ruban, and E.V. Dudnik, “High-technology zirconium dioxide ceramics,” Ogneup. Tekh. Keram., No. 9, 2–8 (2000).
4. Patrick M. Kelly and L.R. Francis Rose, “The martensitic transformation in ceramics—its role in transformation toughening,” Prog. Mater. Sci., 47, 463–557 (2002).10.1016/S0079-6425(00)00005-0 ↗
5. O. Vasylkiv, Y. Sakka, and V.V. Skorokhod, “Low-temperature processing and mechanical properties of zirconia and zirconia–alumina nanoceramics,” J. Am. Ceram. Soc., 86, No. 2, 299–304 (2003).10.1111/j.1151-2916.2003.tb00015.x ↗
6. M.K.G. Abbas, S. Ramesh, S.F.H. Tasfy, and K.Y. Sara Lee, “A state-of-the-art review on alumina toughened zirconia ceramic composites,” Mater. Today Commun., 37, 106964 (2023), https://doi.org/10.1016/j.mtcomm.2023.106964.10.1016/j.mtcomm.2023.106964 ↗
7. J. Chevalier and L. Gremillard, “Ceramics for medical applications: A picture for the next 20 years,” J. Eur. Ceram. Soc., 29, Issue 7, 1245−1255 (2009), https://doi.org/10.1016/j.jeurceramsoc. 2008.08.025.10.1016/j.jeurceramsoc.2008.08.025 ↗
8. A.B. Dresch, J. Venturini, S. Arcaro, O.R.K. Montedo, and C.P. Bergmann, “Ballistic ceramics and analysis of their mechanical properties for armour applications: A review,” Ceram. Int., 47, 8743–8761 (2021), https://doi.org/10.1016/j.ceramint.2020.12.095.10.1016/j.ceramint.2020.12.095 ↗
9. S.Zh.D. Ibrahim, A. Arab, M.J. Juliewatty, and Z.A. Arifin, “Effects of additives additions and sintering techniques on the microstructure and mechanical properties of Zirconia Toughened Alumina (ZTA): A review,” Int. J. Refract. Met. Hard Mater., 106, 105870 (2022), https://doi.org/10.1016/j.ijrmhm.2022.105870.10.1016/j.ijrmhm.2022.105870 ↗
10. E.M. Brodnikovskyi, “Anode of a ceramic fuel cell (Overview),” in: Electron Microscopy and Strength of Materials: Collected Scientific Papers [in Russian], IPM NAN Ukrainy, Kyiv (2013), Issue 19, pp. 145–149.
11. I.V. Brodnikovska, Y.M. Brodnikovskyi, M.M. Brychevskyi, and O.D. Vasylyev, “Joint impedance spectroscopy analysis of 10Sc1CeSZ and 8YSZ solid electrolytes for SOFC,” Powder Metall. Met. Ceram., 57, 723–730 (2019), https://doi.org/10.1007/s11106-019-00037-4.10.1007/s11106-019-00037-4 ↗
12. Y.M. Brodnikovskyi, V.Y. Podhurska, N.O. Lysunenko, D.M. Brodnikovskyi, I.O. Polishko, O.V. Bezdorozhev, A.A. Kyrysha, and O.D. Vasylyev, “The influence of the anode structure on the electrical properties of a solid oxide fuel cell,” Mater Sci., 59, 443–450 (2023), https://doi.org/10.1007/s11003-024-00796-5.10.1007/s11003-024-00796-5 ↗
13. E.V. Dudnik, S.N. Lakiza, I.N. Hrechanyuk, A.K. Ruban, V.P. Redko, I.O. Marek, V.B. Shmibelsky, A.A. Makudera, and N.I. Hrechanyuk, “Thermal barrier coatings based on ZrO2 solid solutions,” Powder Metall. Met. Ceram., 59, No. 3–4, 179–200 (2020).10.1007/s11106-020-00151-8 ↗
14. V.V. Skorokhod, “Hierarchy of structural levels and structural engineering of inorganic materials,” Neorg. Materialoved., Naukova Dumka, Kyiv (2008), Vol. 1, pp. 339–357.
15. V.V. Skorokhod, I.V. Uvarova, and A.V. Ragulya, Physicochemical Kinetics in Nanostructured Systems [in Ukrainian], Akademperiodika, Kyiv (2001), p. 180.
16. T.E. Konstantinova, I.A. Danilenko, and V.V. Tokiy, “Zirconium dioxide nanopowders: production, study, and application,” Nanosyst. Nanomater. Nanotekhnol., 2, Issue 2, 609–632 (2004).
17. E. Kontonasaki, P. Giasimakopoulos, and A.E. Rigos, “Strength and aging resistance of monolithic zirconia: an update to current knowledge. Review article,” Jpn. Dental Sci. Rev., 56, 1–23 (2020).10.1016/j.jdsr.2019.09.002 ↗
18. A.K. Chitoria, M. Arshid, and M.A. Shah, “A review of ZrO2 nanoparticles applications and recent advancements. Review article,” Ceram. Int., 49, 32343–32358 (2023), https://doi.org/10.1016/j.ceramint.2023.06.296.10.1016/j.ceramint.2023.06.296 ↗
19. A.M. El-Khawaga, A. Zidanc, and A.I.A. Abd El-Mageed, “Preparation methods of different nanomaterials for various potential applications: A review,” J. Mol. Struct., 1281, 135148 (2023), https://doi.org/10.1016/j.molstruc.2023.135148.10.1016/j.molstruc.2023.135148 ↗
20. E.V. Dudnik and A.V. Shevchenko, “Variation in properties of ZrO2–Y2O3–CeO2–Al2O3 powders during thermal treatment at 400 to 1300°C,” Powder Metal. Met. Ceram., 49, No. 3–4, 125–134 (2010).10.1007/s11106-010-9211-y ↗
21. M. Mosavari, A. Khajehhaghverdi, and R.M. Aghdam, “Nano-ZrO2: A review on synthesis methodologies,” Inorg. Chem. Commun., 157, 111293 (2023), https://doi.org/10.1016/j.inoche.2023.111293.10.1016/j.inoche.2023.111293 ↗
22. N.A. Shabanova, V.V. Popov, and P.L. Sarkisov, Chemistry and Technology of Nanosized Oxides [in Russian], IKTs Akademkniga, Moscow (2006), p. 309.
23. E.V. Dudnik, Z.A. Zaitseva, A.V. Shevchenko, and L.M. Lopato, “Methods for preparing fine powders based on zirconium dioxide,” Powder Metall. Met. Ceram., 32, No. 7, 581–586 (1993).10.1007/BF00559941 ↗
24. M. Zakeri, M. Razavi, M.R. Rahimipour, and B.J. Abbasi, “Effect of ball to powder ratio on the ZrO2 phase transformations during milling,” Physica B, 444, 49–53 (2014), https://doi.org/10.1016/j.physb.2014.03.010.10.1016/j.physb.2014.03.010 ↗
25. R.K. Goyal, S.P. Deshpande, and S.S. Singare, “Synthesis of ZrO2 nanopowder using high energy ball mill and characterization,” J. Mater. Sci. Surf. Eng., 4, No. 2, 360–363 (2016).
26. S. Bid and S.K. Pradhan, “Preparation and microstructure characterization of ball-milled ZrO2 powder by the Rietveld method: monoclinic to cubic phase transformation without any additive,” J. Appl. Cryst., 35, 517–525 (2002).10.1107/S0021889802008725 ↗
27. M. Zakeri, M.R. Rahimipour, and J.B. Abbasi, “Synthesis of nanostructure tetragonal ZrO2 by high energy ball milling,” Mater. Technol., 28, No. 4, 181–186 (2013).10.1179/1753555712Y.0000000044 ↗
28. Z. Yanqiong, L. Jiajia, H. Weiwei, G. Lei, Z. Fan, O. Mamdouh, and C. Guo, “Ball milling assisted preparation of nano La–Y/ZrO2 powder ternary oxide system: Influence of doping amounts,” Ceram. Int., 49, 10375–10383 (2023), 10.1016 /j.ceramint.2022.11.218.10.1016/j.ceramint.2022.11.218 ↗
29. C. Duran, K. Sato, Y. Hotta, H. Göçmez, and K. Watari, “Ball milling assisted hydrothermal synthesis of ZrO2 nanopowders,” Ceram. Int., 41, Issue 4, 5588–5593 (2015), https://doi.org/10.1016/j.ceramint.2014.12.138.10.1016/j.ceramint.2014.12.138 ↗
30. Zh. Yunfeng, W. Kaijun, and J. Hu, “Effect of ball milling on the properties of zirconia powder prepared by alcohol-aqueous coprecipitation method,” Key Eng. Mater., 544, 34–37 (2013), https://doi.org/10.4028/www.scientific.net/KEM.544.34.10.4028/www.scientific.net/KEM.544.34 ↗
31. G.A. Bagliuk, A.A. Khomenko, and D.A. Goncharuk, “New designs of high-energy devices for fine grinding of powder materials,” Visn. NTU KhPI, No. 57, 1030 (2013).
32. M. Bahamirian, S.M.M. Hadavi, M.R. Rahimipour, M. Farvizi, and A. Keyvani, “Synthesis and characterization of yttria-stabilized zirconia nanoparticles doped with ytterbium and gadolinium: ZrO2 9.5Y2O3 5.6Yb2O3 5.2Gd2O3,” Metall. Mater. Trans., 49, 2523–2532 (2018), https://doi.org/10.1007/s11661-018-4555-x.10.1007/s11661-018-4555-x ↗
33. Y. Tan, Y. Wang, H. Liu, X. Xiong, and H. Cheng, “Synthesis and high-temperature phase transformation behavior of Dy2O3–Sc2O3 co-stabilized ZrO2 powders prepared by cocurrent chemical coprecipitation,” Ceram. Int., 50, 22395–22404 (2024), https://doi.org/10.1016/j.ceramint.2024.03.340.10.1016/j.ceramint.2024.03.340 ↗
34. S. Jayakumar, P.V. Ananthapadmanabhan, K. Perumal, T.K. Thiyagarajan, S.C. Mishra, L.T. Su, A.I.Y. Tok, and J. Guo, “Characterization of nano-crystalline ZrO2 synthesized via reactive plasma processing,” Mater. Sci. Eng., 176, 894–899 (2011), https://doi.org/10.1016/j.mseb.2011.05.013.10.1016/j.mseb.2011.05.013 ↗
35. V. Monu, Ch. Ramesh, and K.G. Vinod, “ZrO2 nanoparticles: A good decontaminating agent for 2-choloro ethyl ethyl sulphide and dimethyl methyl phosphonate,” J. Environ. Chem. Eng., 4, No. 1, 256 (2015), https://doi.org/10.1016/j.jece.2015.11.016.10.1016/j.jece.2015.11.016 ↗
36. V. Monu, K. Vinod, and K. Akash, “Synthesis of ZrO2 nanoparticles using reactive magnetron sputtering and their structural, morphological and thermal studies,” Mater. Chem. Phys., 212, 268–273 (2018), https://doi.org/10.1016/j.matchemphys.2018.03.049.10.1016/j.matchemphys.2018.03.049 ↗
37. M.K. Baek, S.J. Park, and D.J. Choi, “Synthesis of zirconia (ZrO2) nanowires via chemical vapor deposition,” J. Cryst. Growth, 459, 198–202 (2017), 10. 1016/j.jcrysgro.2016.12.033.10.1016/j.jcrysgro.2016.12.033 ↗
38. T.E. Konstantinova, I.A. Danilenko, V.V. Tokiy, and V.A. Glazunova, “Production of nanosized zirconium dioxide powders. From innovation to innovation,” Nauka Innov., 1, No. 3, 76–87 (2005).10.15407/scin1.03.076 ↗
39. L. Li and W. Wang, “Synthesis and characterization of monoclinic ZrO2 nanorods by a novel and simple precursor thermal decomposition approach,” Solid State Commun., 127, 639–643 (2003).10.1016/S0038-1098(03)00521-0 ↗
40. Ch. Fengxi, Zh. Kewu, H. Lin, Ch. Yuxiang, and K. Fethi, “Preparation of rodlike t-ZrO2 nanoparticles by two-step calcination of 1,12-diaminododecane–zirconia mesostructured composites,” Mater. Res. Bull., 41, 10–18 (2006), https://doi.org/10.1016/j.materresbull. 2005.07.041.10.1016/j.materresbull.2005.07.041 ↗
41. L. Xuefeng, Zh. Quan, L. Jianmin, T. Wang, X. Yanqiao, J. Lian, F. Jiang, G. Feng, and J. Weihui, “Partially stabilized tetragonal ZrO2 whiskers with preferred [001] direction derived from CaF2,” J. Materiomics, 7, 879–885 (2021), https://doi.org/10.1016/j.jmat.2020.12.004.10.1016/j.jmat.2020.12.004 ↗
42. L. Wang, K.F. Cai, Y.Y. Wang, J.L. Yin, H. Li, and C.W. Zhou, “Preparation and characterization of tetragonal-ZrO2 nanopowders by a molten hydroxides method,” Ceram. Int., 35, 2499–2501 (2009), https://doi.org/10.1016/j.ceramint.2008.11.034.10.1016/j.ceramint.2008.11.034 ↗
43. U.N. Fedenko, T.A. Dontsova, and I.M. Astrelin, “Structure and morphology of zirconium oxide (IV) powders synthesized by the thermal method from different precursors,” Nauk. Visti NTUU KPI, 3, 133–136 (2012).
44. G. Chenyi, H. Peng, Y. Lingjie, and Y. Fangli, “Synthesis and characterization of ZrO2 hollow spheres,” Mater. Lett., 63, 1013–1015 (2009), https://doi.org/10.1016/j.matlet.2008.12.053.10.1016/j.matlet.2008.12.053 ↗
45. S.-N. Masoud, D. Mahnaz, and D. Fatemeh, “Pure cubic ZrO2 nanoparticles by thermolysis of a new precursor,” Polyhedron, 28, 3005–3009 (2009), https://doi.org/10.1016/j.poly.2009.06.032.10.1016/j.poly.2009.06.032 ↗
46. W. Taiheng, Sh. Qian, G. Shengsong, Zh. Wenli, and L. Qingyun, “Influence of molecular weight of chitosan on the microstructures and photocatalytic property of ZrO2 prepared by chitosan templates method,” Mater. Res. Bull., 83, 657–663 (2016), 10. 1016/j.materresbull.2016.07.021.10.1016/j.materresbull.2016.07.021 ↗
47. P. Gibota, L. Vidal, L. Laffont, and J. Mory, “Zirconia nanopowder synthesis via detonation of trinitrotoluene,” Ceram. Int., 46, Issue 17, 27057–27062 (2020), https://doi.org/10.1016/j.ceramint.2020.07.182.10.1016/j.ceramint.2020.07.182 ↗
48. S. Specchia, C. Galletti, and V. Specchia, “Solution combustion synthesis as intriguing technique to quickly produce performing catalysts for specific applications,” Stud. Surf. Sci. Catal., 175, 59–67 (2010), https://doi.org/10.1016/S0167-2991(10)75008-4 .10.1016/S0167-2991(10)75008-4 ↗
49. A. Varma, A.S. Mukasyan, A.S. Rogachev, and K.V. Manukyan, “Solution combustion synthesis of nanoscale materials,” Chem. Rev., 116, Issue 23, 14493–14586 (2016), https://doi.org/10.1021/acs.chemrev.6b00279.10.1021/acs.chemrev.6b00279 ↗
50. Y. Ziyang, L. Si, L. Xiang, S. Wuyang, L. Wei, G. Zhengxia, T. Mengya, M. Chengliang, and L. Yuan, “A review on the synthesis of metal oxide nanomaterials by microwave induced solution combustion,” RSC Adv., 13, No. 5, 3265–3277 (2023), https://doi.org/10.1039/d2ra07936d.10.1039/d2ra07936d ↗
51. C.R. Jagadish, K.P. Ranjan, and P. Pramanik, “Chemical synthesis and structural characterization of nanocrystalline powders of pure zirconia and yttria stabilized zirconia (YSZ),” J. Eur. Ceram. Soc., 20, 1289–1295 (2000), https://doi.org/10.1016/S0955-2219(99)00293-9.10.1016/S0955-2219(99)00293-9 ↗
52. J.C. Ray, P. Pramanik, and S. Ram, “Formation of Cr3+ stabilized ZrO2 nanocrystals in a single cubic metastable phase by a novel chemical route with a sucrose–polyvinyl alcohol polymer matrix,” Mater. Lett., 48, 281–291 (2001), https://doi.org/10.1016/S0167-577X(00)00316-5.10.1016/S0167-577X(00)00316-5 ↗
53. J.C. Ray, C.R. Saha, and P. Pramanik, “Stabilized nanoparticles of metastable ZrO2 with Cr3+/Cr4+ cations: preparation from a polymer precursor and the study of the thermal and structural properties,” J. Eur. Ceram. Soc., 22, 851–862 (2002), PII: S0955-2219(01)00404-6.10.1016/S0955-2219(01)00404-6 ↗
54. G.E. Lascalea, D.G. Lamas, L. Pérez, E.D. Cabanillas, and N.E. Walsöe de Reca, “Synthesis of ZrO2–15 mol% CeO2 nanopowders by a pH-controlled nitrate–glycine process,” Mater. Lett., 58, 2456–2460 (2004), https://doi.org/10.1016/j.matlet.2004.02.036.10.1016/j.matlet.2004.02.036 ↗
55. S. Vivekanandhan, M. Venkateswarlu, H.R. Rawls, and N. Satyanarayana, “Acrylamide assisted polymeric citrate route for the synthesis of nanocrystalline ZrO2 powder,” Mater. Chem. Phys., 120, 148–154 (2010), https://doi.org/10.1016/j.matchemphys.2009.10.038.10.1016/j.matchemphys.2009.10.038 ↗
56. M. Ramachandra, A. Abhishek, P. Siddeshwar, and V. Bharathi, “Hardness and wear resistance of ZrO2 nano particle reinforced Al nanocomposites produced by powder metallurgy,” Proc. Mater. Sci., 10, 212–219 (2015), https://doi.org/10.1016/j.mspro.2015.06.043.10.1016/j.mspro.2015.06.043 ↗
57. L. Renuka, K.S. Anantharaju, Y.S. Vidya, H.P. Nagaswarupa, S.C. Prashantha, S.C. Sharmac, H. Nagabhushana, and G.P. Darshan, “A simple combustion method for the synthesis of multi-functional ZrO2/CuO nanocomposites: Excellent performance as Sunlight photocatalysts and enhanced latent finger print detection,” Appl. Catal. B: Environ., 210, No. 5, 97–115 (2017), https://doi.org/10.1016/j.apcatb.2017.03.055.10.1016/j.apcatb.2017.03.055 ↗
58. I.A. Yashchishyna, A.M. Korduban, T.E. Konstantinova, I.A. Danilenko, G.K. Volkova, V.A. Glazunovaa, and V.O. Kandyba, “Structure and surface characterization of ZrO2–Y2O3–Cr2O3 system,” Appl. Surf. Sci., 256, 7175–7177 (2010), https://doi.org/10.1016/j.apsusc.2010. 05.046.10.1016/j.apsusc.2010.05.046 ↗
59. C.A. Silva, N.F.P. Ribeiro, and M.V.M. Souza, “Effect of the fuel type on the synthesis of yttria stabilized zirconia by combustion method,” Ceram. Int., 35, 3441–3446 (2009), https://doi.org/10.1016/j.ceramint.2009.06.005.10.1016/j.ceramint.2009.06.005 ↗
60. H.C. Madhusudhana, S.N. Shobhadevi, B.M. Nagabhushana, B.V. Chaluvaraju, M.V. Murugendrappa, R.K. Hari, H. Nagabhushana, and N.R. Radeep, “Effect of fuels on conductivity, dielectric and humidity sensing properties of ZrO2 nanocrystals prepared by low temperature solution combustion method,” J. Asian Ceram. Soc., 4, 309–318 (2016), https://doi.org/10.1016/j.jascer.2016.05.009.10.1016/j.jascer.2016.05.009 ↗
61. Y.S. Vidya, K.S. Anantharaju, H. Nagabhushana, S.C. Sharma, H.P. Nagaswarupa, S.C. Prashantha, and C.D. Shivakumara, “Combustion synthesized tetragonal ZrO2: Eu3+ nanophosphors: Structural and photoluminescence studies,” Spectrochim. Acta Part A: Mol. Biomol. Spectrosc., 135, 241–251 (2015),https://doi.org/10.1016/j.saa.2014.06.15110.1016/j.saa.2014.06.151 ↗
62. L. Renuka, K.S. Anantharaju, K. Gurushantha, H. Nagabhushana, Y.S. Vidya, C. Suresh, and M. Sennappan, “Phase-transformation synthesis of Li codoped ZrO2: Eu3+ nanomaterials: Characterization, photocatalytic, luminescent behavior and latent fingerprint development,” Ceram. Int., 47, Issue 7, Part B, 10332–10345 (2021), https://doi.org/10.1016/j.ceramint.2020.11.152.10.1016/j.ceramint.2020.11.152 ↗
63. D. Prakashbabu, H.B. Ramalingam, R. Hari Krishna, B.M. Nagabhushana, C. Shivakumara, K. Munirathnam, and S. Ponkumar, “A potential white light emitting cubic ZrO2: Dy3+, Li+ nano phosphors for solid state lighting applications,” J. Lumin., 192, 496–503 (2017), https://doi.org/10.1016/j.jlumin.2017.07.015.10.1016/j.jlumin.2017.07.015 ↗
64. E.D. Sherly, J.J. Vijaya, S.S. Clament, and L.J. Kennedy, “Microwave assisted combustion synthesis of coupled ZnO–ZrO2 nanoparticles and their role in the photocatalytic degradation of 2,4-dichlorophenol,” Ceram. Int., 40, 5681–5691 (2014), https://doi.org/10.1016/j.ceramint.2013.11.006.10.1016/j.ceramint.2013.11.006 ↗
65. S. Manjunatha and M.S. Dharmaprakash, “Microwave assisted synthesis of cubic Zirconia nanoparticles and study of optical and photoluminescence properties,” J. Lumin., 180, 20–24 (2016), https://doi.org/10.1016/j.jlumin.2016.07.055.10.1016/j.jlumin.2016.07.055 ↗
66. S. Ponkumar, D. Prakashbabu, K. Parasuraman, R. Uthrakumar, and K. Kaviyarasu, “Synthesis, characterization, and enhanced photoluminescence of ZrO2: Dy3+ phosphors by incorporating Li+, Na+ and K+ ions for LED applications,” Ceram. Int., 50, 13219–13229 (2024), https://doi.org/10.1016/j.ceramint.2024.01.233.10.1016/j.ceramint.2024.01.233 ↗
67. S. Głowniak, B. Szczęśniak, J. Choma, and M. Jaroniec, “Recent developments in sonochemical synthesis of nanoporous materials,” Molecules, 28, 2639 (2023), https://doi.org/10.3390/molecules28062639.10.3390/molecules28062639 ↗
68. A. Gedanken, “Using sonochemistry for the fabrication of nanomaterials,” Ultrason. Sonochem., 11, 47–55 (2004), https://doi.org/10.1016/j.ultsonch.2004.01.037.10.1016/j.ultsonch.2004.01.037 ↗
69. H. Xu, B.W. Zeiger, and K.S. Suslick, “Sonochemical synthesis of nanomaterials,” Chem. Soc. Rev., Issue 7 (2013), https://doi.org/10.1039/c2cs35282f.10.1039/c2cs35282f ↗
70. S. Zinatloo-Ajabshir and M. Salavati-Niasari, “Synthesis of pure nanocrystalline ZrO2 via a simple sonochemical assisted route,” J. Ind. Eng. Chem., 20, 3313–3319 (2014), https://doi.org/10.1016/j.jiec.2013.12.013.10.1016/j.jiec.2013.12.013 ↗
71. S. Mallakpour and E. Shafiee, “A simple method for the sonochemical synthesis of PVA/ZrO2-vitamin B1 nanocomposites: Morphology, mechanical, thermal and wettability investigations,” Ultrason. Sonochem., 40, 881–889 (2018), https://doi.org/10.1016/j.ultsonch. 2017.08.039.10.1016/j.ultsonch.2017.08.039 ↗
72. P.J. Jodłowski, D.K. Chlebda, R.J. Jędrzejczyk, A. Dziedzicka, Ł. Kuterasiński, and M. Sitarz, “Characterisation of well-adhered ZrO2 layers produced on structured reactors using the sonochemical sol–gel method,” Appl. Surf. Sci., 427, 563–574 (2018), https://doi.org/10.1016/j.apsusc.2017.08.057.10.1016/j.apsusc.2017.08.057 ↗
73. T.B.O. Nunes, L.X. Lovisa, M.D. Teodoro, M.R.D. Bomio, and F.V. Motta, “Nanoparticles of ZrO2: xSr2+ produced by the sonochemical method: Structural, morphological, and photoluminescent characterization for optoelectronic applications,” Ceram. Int., 50, 25202–25209 (2024), https://doi.org/10.1016/j.ceramint.2024.04.249.10.1016/j.ceramint.2024.04.249 ↗