journal article·2014-07

Effect of the Chemical Composition of Electrode Materials and Deposition Conditions on the Properties of Spark-Deposited Coatings. II. Coating Hardness and Wear Resistance

V. P. Konoval, O. P. Umanskii, O. D. Kostenko, I. S. Martsenyuk

Powder Metallurgy and Metal Ceramics· Volume 53· Issue 3-4
Publisher page

Abstract

Cermet coatings based on Ni–Al alloys and titanium–chromium diboride are electrospark-deposited onto 40Kh steel. It is analyzed how the metal-to-refractory phase ratio in the electrode material and the deposition conditions influence the mechanical and tribotechnical characteristics of the coatings. The wear resistance and friction coefficients of the electrospark-deposited coatings are shown to depend on the friction speed and loading. The cermet coatings show high tribotechnical characteristics (I = 1–5 μm/km, f = 0.2–0.25) at speeds to 12 m/sec and loads to 4 MPa in dry friction conditions. These characteristics can be controlled by varying electrode chemical composition and deposition conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Coatings · Metal Alloys Wear and Properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. V. P. Konoval, O. P. Umanskii, A. D. Panasyuk, and O. F. Lukyanchuk, “Effect of the chemical composition of electrode materials and deposition parameters on the properties of electrospark-deposited coatings. I. Mass transfer rate and coating composition”, Powder Metall. Met. Ceram., 53, No. 1–2, 31–39 (2014).10.1007/s11106-014-9584-4 ↗
2. A. V. Paustovskii, V. I. Novikova, A. I. Yuga, and F. F. Egorov, “Tribotechnical characteristics of electrospark-deposited coatings from TiN composites,” Fiz. Khim. Mekh. Mater., No. 2, 105–106 (1999).
3. E. V. Ivashchenko, G. G. Lobachova, and V. F. Mazanko, “Layerwise electrospark deposition of strengthened surface iron layers,” Probl. Tertya Znosh., Issue 52, 210–215 (2009).
4. K. M. Khranovska, E. V. Ivashchenko, and G. G. Lobachova, “Electrospark deposition of multilayer coatings on iron in carbon-containing environments,” Metalloznav. Obrob. Met., No. 1, 30–32 (2011).
5. V. D. Belik, R. V. Litvin, M. S. Kovalchenko, and A. A. Rogozinskaya, “Effect of pulse duration and size of interelectrode interval on electric-spark spraying. II. Effect of pulse duration and size of interelectrode interval on composition and mechanical properties of coatings,” Powder Metall. Met. Ceram., 46, No. 1–2, 95–99 (2007).10.1007/s11106-007-0015-7 ↗
6. A. V. Paustovskii, G. A. Frolov, V. I. Novikova, et al., “Changes of structure and physicochemical properties of spark coatings based on TiN and TiB2 after treatment with concentrated solar radiation,” Powder Metall. Met. Ceram., 44, No. 7–8, 358–362 (2005).10.1007/s11106-005-0103-5 ↗
7. A. D. Verkhoturov, I. A. Podchernyaeva, L. F. Pryadko, and F. F. Egorov, Electrode Materials for Electrospark Deposition [in Russian], Nauka, Moscow (1988), p. 224.
8. A. D. Verkhoturov, I. A. Podchernyaeva, N. S. Stolyarova, et al., Electrospark-Deposited Coatings from New Heterophase Materials [in Russian], Inst. Gorn. Dela DVO AN SSSR, Vladivostok (1987), p. 60.
9. V. P. Konoval, O. P. Umanskii, A. D. Panasyuk, et al., “Electrospark deposition of coatings from titanium–chromium carbide and diboride composites,” Sverkhtverd. Mater., No. 4, 84–91 (2009).
10. V. P. Konoval, V. Zh. Shemet, B. Grushko, et al., “Structure and properties of titanium–chromium diboride composites,” Powder Metall. Met. Ceram., 51, No. 7–8, 429–436 (2012).10.1007/s11106-012-9452-z ↗
11. A. D. Verkhoturov and I. M. Mukha, Technology of Electrospark Alloying of Metallic Surfaces [in Russian], Tekhnika, Kiev (1982), p. 181.
12. V. Derflinger, H. Brandle, and H. Zimmermann, “New hard/lubricant coating for dry machining,” Surf. Coat. Technol., 113, 286–292 (1999).10.1016/S0257-8972(99)00004-3 ↗
13. A. A. Voevodin, C. Rebholz, J. M. Schneider, et al., “Wear resistant composite coatings deposited by electron enhanced closed field unbalanced magnetron sputtering,” Surf. Coat. Technol., 73, 185–197 (1995).10.1016/0257-8972(94)02381-6 ↗
14. K. J. Wahl and W. G. Sawyer, “Observing interfacial sliding processes in solid–solid contacts,” MRS Bull., 33, 1159–1167 (2008).10.1557/mrs2008.246 ↗