journal article·2012-09

Graded porous titanium scaffolds fabricated using powder metallurgy technique

X. P. Fan, B. Feng, Y. L. Di, J. X. Wang, X. Lu, J. Weng

Powder Metallurgy and Metal Ceramics· Volume 51· Issue 5-6
Publisher page

Abstract

Graded porous titanium scaffolds with a pore size of 300–400 μm are prepared by sintering. Their mechanical properties and porosity are investigated. Compared with common titanium scaffolds, the mechanical properties of graded specimens can be improved by introducing graded structure. The graded porous titanium scaffold consists of inner, middle, and outer layers. When the outer layer porosity of the graded specimen is increased from 67 to 72%, the Young’s modulus of the graded specimen increases from 3.29 to 4.72 GPa, meanwhile the compressive strength increases from 131.9 to 165 MPa, respectively. These results suggest that the graded porous titanium scaffold has potential application for tissue engineering scaffolds under load-bearing conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. S. K. Ghosh and S. Chatterjee, “On the direct diffusion bonding of titanium alloy to stainless steel,” Mater. Manuf. Processes, 25, 1317–1323 (2010).10.1080/10426914.2010.520793 ↗
2. M. M. Verdian, “Fabrication of supersaturated NiTi(Al) alloys by mechanical alloying,” Mater. Manuf. Processes, 25, 1437–1439 (2010).10.1080/10426914.2010.501093 ↗
3. S. Fujibayashi, M. Neo, H. M. Kim, et al., “Osteoinduction of porous bioactive titanium metal,” Biomaterials, 25, 443–450 (2004).10.1016/S0142-9612(03)00551-9 ↗
4. N. Nomura, T. Kohama, I. H. Oh, et al., “Mechanical properties of porous Ti–15Mo–5Zr–3Al compacts prepared by powder sintering,” Sci. Eng. C, 25, 330–335 (2005).10.1016/j.msec.2005.04.001 ↗
5. B. Ye and D. C. Dunand, “Titanium foams produced by solid-state replication of NaCl powders, Mat. Sci. Eng. A, 528, 691–697 (2010).10.1016/j.msea.2010.09.054 ↗
6. Y. J. Chen, B. Feng, Y. P. Zhu, et al., “Fabrication of porous titanium implants with biomechanical compatibility,” Mater. Lett., 63, 2659–2661 (2009).10.1016/j.matlet.2009.09.029 ↗
7. E. L. Zhang and C. M. Zou, “Porous titanium and silicon-substituted hydroxyapatite biomodification prepared by a biomimetic process: Characterization and in vivo evaluation,” Acta Biomater., 5, 1732–1741 (2009).10.1016/j.actbio.2009.01.014 ↗
8. S. L. Zhu, X. J. Yang, M. F. Chen, et al., “Effect of porous NiTi alloy on bone formation: A comparative investigation with bulk NiTi alloy for 15 weeks in vivo,” Mater. Sci. Eng. C, 28, 1271–1275 (2008).10.1016/j.msec.2007.11.010 ↗
9. I. H. Oh, N. Nomura, N. Masahashi, and S. Hanada, “Mechanical properties of porous titanium compacts prepared by powder sintering,” Scripta Mater., 49, 1197–1202 (2003).10.1016/j.scriptamat.2003.08.018 ↗
10. C. E. Wen, M. Mabuchi, Y. Yamada, et al., “Processing of biocompatible porous Ti and Mg,” Scripta Mater., 45, 1147–1153 (2001).10.1016/S1359-6462(01)01132-0 ↗
11. G. E. Ryan, A. S. Pandit, and D. P. Apatsidis, “Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique,” Biomaterials, 29, 3625–3635 (2008).10.1016/j.biomaterials.2008.05.032 ↗
12. B. V. Krishna, S. Bose, and A. Bandyopadhyay, “Low stiffness porous Ti structures for load-bearing implants,” Acta Biomater., 3, 997–1006 (2007).10.1016/j.actbio.2007.03.008 ↗
13. S. W. Yook, B. H. Yoon, H. E. Kim, et al., “Porous titanium (Ti) scaffolds by freezing TiH2/camphene slurries,” Mater. Lett., 62, 4506–4508 (2008).10.1016/j.matlet.2008.08.010 ↗
14. H. Kienapfel, C. Sprey, A. Wilke, and P. Griss, “Implant fixation by bone ingrowth,” J. Arthroplasty, 14, No. 3, 335–368 (1999).10.1016/S0883-5403(99)90063-3 ↗