Determination of the physical and mechanical properties of iron-based powder materials produced by microwave sintering
Source abstract
Abstract
Microwave energy is highly efficient for heating and processing different materials. In recent years, this type of heat transfer has been used in sintering process. Rapid and highly efficient heating, time and energy saving, and improved properties of sintered materials are advantages of microwave sintering. In this paper, Fe and Fe-Cu powder compact samples (cylindrical and bone shapes) are sintered both in microwave and electrical tube furnaces. The microwave generator has 2.45 GHz frequency and 1 KW power. Times are selected in the range of 5–25 min for microwave sintering and 5–40 min for electrical heating. The sintering temperature is set at 1120°C. Samples are sintered in the reducing atmosphere of 95% N2 + 5% H2 mixture. The density, hardness, and tensile strength of the samples are measured. The results are compared. The results show that the microwave-sintered materials have a finer microstructure. The microwave-sintered materials have 6–8% higher density, 5–10 HV5 higher hardness, and about 10% higher tensile strength than conventionally sintered materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. J. Cheng et al., “Continuous microwave sintering of alumina abrasive grits,” J. Mat. Proc. Tech., 108, 26–29 (2000).10.1016/S0924-0136(00)00653-1 ↗
2. I.-Nan Lin et al., “On the microwave sintering technology for improving the properties of semiconducting electronic ceramics,” J. Europ. Ceramic Soc., 21, 2085–2088 (2001).10.1016/S0955-2219(01)00177-7 ↗
3. M. Penneerselvam, A. Agrawal, and K. J. Rao, “Microwave sintering of MoSi2-SiC composites,” Mat. Sci. Eng. A., 356, 267–273 (2003).10.1016/S0921-5093(03)00140-0 ↗
4. Chien-Yih Tsay, Kuo-Shung Liu, and I.-Nan Lin, “Co-firing process using conventional and microwave sintering technologies for MnZn-and NiZn-ferrites,” J. Europ. Ceram. Soc., 21, 1937–1940 (2001).10.1016/S0955-2219(01)00146-7 ↗
5. M. Mizuno et al., “Sintering of alumina by 2.45 GHz microwave heating,” J. Europ. Ceram. Soc., 24, 387–391 (2004).10.1016/S0955-2219(03)00217-6 ↗
6. E. Breval et al., “Comparison between microwave and conventional sintering of WC/Co composites,” Mat. Sci. Eng. A, 391, 285–295 (2005).10.1016/j.msea.2004.08.085 ↗
7. M. Willert-Porada and H. S. Park, “Heating and sintering of steel powders with microwaves at 2.45 GHz frequency related between heating behavior and electrical conductivity,” in: Microwave Theory and Application in Materials Processing V, Second World Congress on Microwave and Radio Frequency Processing (April 2000), Orlando, Florida (2000), pp. 459–470.
8. R. M. Anklekar, D. K. Agrawal, and R. Roy, “Microwave sintering and mechanical properties of PM copper steel,” Powder Metallurgy, 44, No. 4, 355–362 (2001).10.1179/pom.2001.44.4.355 ↗