Simulation of residual thermal stresses in high-porous fibrous silicon nitride ceramics
Source abstract
Abstract
The residual thermal stresses induced in high-porous fibrous silicon nitride ceramics with fine reinforcement inclusions have been computed within numerical experiment. The computations have been performed employing a coupled transient linear thermoelastic problem. The initial state characterized by zero internal stresses is observed when the material is synthesized at high temperatures. Three-dimensional representative fragments of fibrous structures generated with stochastic algorithms accounting for the set microstructural parameters have been used for the simulation. The effect of the volume content and size of reinforcement as silicon carbide spherical inclusions on residual thermal stresses has been demonstrated. The simulations show that the residual stresses are commonly higher than the ultimate strength of the porous materials under study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Z. Krstic and V.D. Krstic, “Silicon nitride: the engineering material of the future,” J. Mater. Sci., 47, 535–552 (2012).10.1007/s10853-011-5942-5 ↗
2. S. Somiya, Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties, Salt Lake City, USA (2013), URL: https://www.researchgate.net/ publication/291156581_Handbook_of Advanced Ceramics: Materials, Applications, Processing, and Properties.
3. S.J. Rodrigues, R.P. Chartoff, D.A. Klosterman, M. Agarwala, and N. Hecht, “Solid freeform fabrication of functional silicon nitride ceramics by laminated object manufacturing,” in: Proc. Solid Freeform Fabrication (SFF) Symposium, Texas, USA (2000), pp. 1–8.
4. H.-C. Liu, S. Lee, S. Kang, C.F. Edwards, and F.B. Prinz, “RP of SiN burner arrays via assembly mould SDM,” Rapid Prototyping J., 10, No. 4, 239–246 (2004).10.1108/13552540410551360 ↗
5. S. Iyer, J. McIntosh, A. Bandyopadhyay, N. Langrana, A. Safari, S.C. Danforth, and P.J. Whalen, “Microstructural characterization and mechanical properties of Si3N4 formed by fused deposition of ceramics,” Int. J. Appl. Ceram. Technol., 5, No. 2, 127–137 (2008).10.1111/j.1744-7402.2008.02193.x ↗
6. B. Cappi, E. Özkol, J. Ebert, and R. Telle, “Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure,” J. Eur. Ceram. Soc., 28, No. 13, 2625–2628 (2008).10.1016/j.jeurceramsoc.2008.03.004 ↗
7. B. Cappi, J. Ebert, and R. Telle, “Rheological properties of aqueous Si3N4 and MoSi2 suspensions tailormade for direct inkjet printing,” J. Amer. Ceram. Soc., 94, No. 1, 111–116 (2011).10.1111/j.1551-2916.2010.04052.x ↗
8. X. Li, L. Zhang, and X. Yin, “Effect of chemical vapor infiltration of Si3N4 on the mechanical and dielectric properties of porous Si3N4 ceramic fabricated by a technique combining 3D printing and pressureless sintering,” Scripta Mater., 67, No. 4, 380–383 (2012).10.1016/j.scriptamat.2012.05.030 ↗
9. X. Li, L. Zhang, and X. Yin, “Microstructure and mechanical properties of three porous Si3N4 ceramics fabricated by different techniques,” Mater. Sci. Eng. A, 549, 43–49 (2012).10.1016/j.msea.2012.03.114 ↗
10. W. Duan, X. Yin, F. Cao, F. Jia, Y. Xie, P. Greil, and N. Travitzky, “Absorption properties of twinned SiC nanowires reinforced Si3N4 composites fabricated by 3d-printing,” Mater. Lett., 159, 257–260 (2015).10.1016/j.matlet.2015.06.106 ↗
11. S. Liu, F. Ye, L. Liu, and Q. Liu, “Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing,” Mater. Des., 66, 331–335 (2015).10.1016/j.matdes.2014.10.079 ↗
12. L. Rabinskiy, “Fabrication of porous silicon nitride ceramics using binder jetting technology,” Inst. Phys. (IOP) Conf. Ser.: Mater. Sci. Eng., 140, No. 1, 012–023 (2016).
13. I. Gibson, D. Rosen, and B. Stucker, “Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing: 2nd ed.,” Johnson Matthey Technol. Rev., 59, No. 3, 193–198 (2015).10.1595/205651315X688406 ↗
14. Q. Liu, Z. Lu, Z. Hu, and J. Li, “Finite element analysis on tensile behavior of 3D random fibrous materials: Model description and meso-level approach,” Mater. Sci. Eng., 587, 36–45 (2013).10.1016/j.msea.2013.07.087 ↗
15. Z. Lu, Q. Liu, H. Han, and D. Zhang, “Experiment and modeling on the compressive behaviors for porous silicon nitride ceramics,” Mater. Sci. Eng., 559, 201–209 (2013).10.1016/j.msea.2012.08.081 ↗
16. W.W. Sampson, Modelling Stochastic Fibrous Materials with Mathematica, Chemical Vapor Deposition, London (2009), p. 277.
17. S.G. Advani, “The use of tensors to describe and predict fiber orientation in short fiber composites,” J. Rheol., 31, No. 8, 751–784 (1987).10.1122/1.549945 ↗
18. S. Lurie, D. Volkov-Bogorodskiy, Y. Solyaev, R. Rizahanov, and L. Agureev, “Multiscale modelling of aluminum-based metal–matrix composites with oxide nanoinclusions,” Comput. Mater. Sci., 116, 62–73 (2016).10.1016/j.commatsci.2015.12.034 ↗
19. T.A. Alexandrova, D.V. Gorlenkov, and N.A. Romanova, “Researching of influence of tungsten, silicon and impurities oxidation on electrolytic dissolution of Cu–Zn and Fe–Ni–Co anodes,” Periódico Tchê Química, 14, No. 28, 9–18 (2017).10.52571/PTQ.v14.n28.2017.9_Periodico28_pgs_9_17.pdf ↗
20. L. Rabinskiy, Y. Solyaev, S.A. Sitnikov, and E.L. Kuznetsova, “Numerical modeling of residual thermal stresses in Si3N4 based high-porous fibrous ceramics,” Int. J. Pure Appl. Math., 111, No. 2, 319–330 (2016).