journal article·2013-11

Powder Metallurgy Production of Ti–5.4 wt.% Si Alloy. I. Simulating the Formation of Powder Particles by Centrifugal Atomization

D. N. Brodnikovskii, N. I. Lugovoi, N. P. Brodnikovskii, V. N. Slyunyaev, L. D. Kulak, A. D. Vasil’ev, S. A. Firstov

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 7-8
Publisher page

Abstract

The powder-metallurgy production of porous Ti–5.4 wt.% Si material used in solid oxide fuel cells is examined. The cooling rate of powder particles, as the main factor influencing their structure in the centrifugal atomization process, is estimated by simulation. It is shown that the cooling rate is mainly dependent on the particle size rather than on the speed of the electrode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. C. Leyens and M. Peters, Titanium and Titanium Alloys: Fundamentals and Applications, Wiley–VCH, Weinheim, Germany (2003).10.1002/3527602119 ↗
2. V. I. Mazur, Y. N. Taran, S. V. Kapustnikova, et al., Titanium Matrix Composites, US Patent 5366.570, publ. November 22 (1994).
3. G. Luetjering, J. C. Williams, and A. Gysler, “Microstructure and mechanical properties of titanium alloys,” in: J. C. M. Li (ed.), Microstructure and Properties of Materials, World Scientific, Singapore (2000), pp. 1–25.10.1142/9789812793959_0001 ↗
4. S. Rangarajan, P. B. Aswath, and W. O. Soboyejo, “Microstructure development and fracture of in-situ reinforced Ti–8.5Al–1B–1S,” Scripta Mater., 35, 239–245 (1996).10.1016/1359-6462(96)00116-9 ↗
5. S. Ya. Golub, A. V. Kotko, N. N. Kuz’menko, et al., “Phase formation in titanium alloys quenched from the liquid state,” Fiz. Met. Metalloved., 73, 94–102 (1992).
6. S. M. L. Sastry, P. J. Meschter, and J. E. O’Neal, “Structure and properties of rapidly solidified dispersionstrengthened titanium alloys. Part I. Characterization of dispersoid distribution, structure and chemistry,” Met. Trans. A, 15, 1451–1463 (1984).10.1007/BF02648575 ↗
7. V. A. Glebov, B. V. Safronov, and Yu. D. Yagodkin, “Studying the centrifugal atomization of Nd–Fe–B alloys in Tsentr-type units,” Metalloved. Term. Obrab. Met., No. 2, 26–28 (2004).
8. V. N. Antsiferov, G. V. Bobrov, L. K. Druzhinin, et al., Powder Metallurgy and Spray Coatings: University Textbook [in Russian], Metallurgiya, Moscow (1987), p. 792.
9. W. E. Ranz and W. R. Marshall, Jr., “Evaporation from drops. Part I,” Chem. Eng. Prog., 48, 141–146 (1952).
10. W. E. Ranz and W. R. Marshall, Jr., “Evaporation from drops. Part II,” Chem. Eng. Prog., 48, 173–179 (1952).
11. M. Zdujic, M. Sokic, V. Petrovic, et al., “The study of properties and cooling rates of steel powders obtained by rotating electrode process,” Powder Metall. Int., 18, 325–329 (1986).
12. C. E. Lapple and C. B. Shepherd, “Calculation of particle trajectories,” Ind. Eng. Chem., 32, 605–617 (1940).10.1021/ie50365a007 ↗
13. J. Szekely, Fluid Flow Phenomena in Metals Processing, Academic Press, New York (1979).
14. R. Clift, J. R. Grace, and M. E. Weber, Bubbles, Drops and Particles, Academic Press, New York (1978).
15. H. Chen, B. Hu, Y. Zhang, et al., “Numerical analysis on solidification process and heat transfer of FGH95 superalloy droplets during PREP,” J. Univ. Sci. Technol., Beijing, 10, 53–58 (2003).
16. S. A. Firstov, S. V. Tkachenko, and N. N. Kuz’menko, “Titanium ‘irons’ and titanium ‘steels’,” Met. Sci. Heat Treat., 51, 12–18 (2009).10.1007/s11041-009-9119-7 ↗
17. I. I. Burke and V. Weiss (eds.), Powder Metallurgy for High-Performance Applications, Syracuse University Press, New York (1972).