Structurization of Composites from Self-Fluxing Alloys with Titanium Diboride Additions
Source abstract
Abstract
The structurization and phase interaction during sintering of the Ni–Cr–B–Si–C–TiB2 composite are studied. X-ray diffraction, scanning electron microscopy, electron microprobe analysis, and metallography are used to examine the effect of 10–40 wt.% titanium diboride additions on the structure and phase composition of the material and powders for thermal spray coatings. It is established that titanium diboride additions lead to the formation of new complex Cr(Me)23C(B)6 phases with microhardness 18–19 GPa and TiC phase. The size and content of these phases can be controlled by changing the amount and size of additions and sintering conditions. The optimum amount of TiB2 promoting high service properties is 20 wt.%. The new phases formed in the composite constitute 30 vol.% and their size is between 1 and 20 μm. It is possible to control the service properties of Ni–Cr–B–Si–C–TiB2 composites and thermal spray coatings by changing the structural and phase composition of the powder material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. V. N. Gadalov, V. V. Samoiloy, and A. I. Lytkin, “Electrospark-deposited coatings from self-fluxing materials with a nickel–chromium matrix on high-speed steel,” Usp. Sovr. Estestvoznan., No. 5, 43–45 (2009).
2. Yu. S. Borisov, I. N. Gorbatov, V. R. Kalinovskii, et al., “Production and structure of flame-sprayed coatings based on Ni–Ci–B–Si alloys,” Powder Metall. Met. Ceram., 24, No. 9, 684–687 (1985).10.1007/BF00792162 ↗
3. Yu. S. Borisov, Yu. A. Kharlamov, S. L. Sidorenko, and E. N. Ardatovskaya, Thermal Spray Coatings from Powder Materials: Handbook [in Russian], Naukova Dumka, Kiev (1987), p. 568.
4. V. V. Kudinov, Thermal Spray Coatings [in Russian], Nauka, Moscow (1977), p. 184.
5. N. A. Klinskaya-Rudenskaya and B. P. Kuz’min, “On effect of refractory additions on the structure and properties of coatings from self-fluxing PG-10K-01 and PGSR-3 alloys,” Fiz. Khim. Obrab. Mater., No. 1, 55–61 (1996).
6. N. A. Yupshskaya-Rudenskaya, V. A. Kopysov, and S. V. Kotsot, “Composite coatings based on Ni–Cr–B–Si alloys. Wear resistance analysis of the coatings,” Fiz. Khim. Obrab. Mater., No. 6, 52–57 (1994).
7. N. A. Klinskaya-Rudenskaya and V. A. Kopysov, “Comparative analysis of composite coatings based on Ni–Cr–B–Si alloys with refractory borides produced by different methods,” Fiz. Khim. Obrab. Mater., No. 11, 63–68 (1995).
8. M. V. Radchenko, Yu. O. Shevtsov, and V. G. Radchenko, “Comprehensive analysis of wear-resistant protective coatings deposited by electron beams in vacuum,” Polzunov. Vest., No. 2, Part 2, 67–71 (2005).
9. N. A. Klinskaya-Rudenskaya and V. A. Kopysov, “Composite coatings based on Ni–Cr–B–Si alloys. Microstructural analysis of the coatings,” Fiz. Khim. Obrab. Mater., No. 1, 69–81 (1995).
10. G. V. Samsonov and I. M. Vinnitskii, Refractory Compounds: Handbook [in Russian], Metallurgiya, Moscow (1976), p. 557.
11. A. E. Terentiev, V. P. Krasovskii, M. S. Storozhenko, et al., “Wetting of zirconium, titanium, and chromium borides and titanium carbide by self-fluxing nickel-based alloy,” Adgez. Raspl. Paika Mater., Issue 45, 79–85 (2012).