journal article·2017-05

A New Method of Mixing Quality Assessment for Friction Material Constituents Toward Better Mechanical Properties

Fatma Makni, Mohamed Kchaou, Anne-Lise Cristol, Riadh Elleuch, Yannick Desplanques

Powder Metallurgy and Metal Ceramics· Volume 56· Issue 1-2
Publisher page

Abstract

Friction materials used for brake lining are highly heterogeneous composites for which the link between formulation, the resulting material properties, and performances is not well understood. Their heterogeneity is induced by the variety of ingredients (morphology, size, properties etc.) and the manufacturing process which includes a succession of steps: mixing, preforming, hot molding, and post-curing. Among these steps, mixing have a great impact on the material microstructure in terms of ingredient distribution and, therefore, on its mechanical properties. However, mastering the mixing process is very difficult, since it is still based on the empirical experience of manufacturers. In this study, a new method and methodology of mixing state evaluation of friction material constituents was developed. First, it consists on studying constituents’ physical properties permitting to facilitate the investigation of mixing state evolution. This investigation includes two steps: binary and multi-constituent mixture study. This work suggests a non-time-consuming image analysis method using two statistical coefficients to evaluate the mixing state, which are Kurtosis and Coefficient of Variation (C.V). The latter enable to describe the mixing quality and state evolution at the surface of the mixing volume as well as to evaluate the mixing time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Granular flow and fluidized beds · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. R. Pfeffer, R. N. Dave, W. Dongguang, and M. Ramlakhan, “Synthesis of engineered particulates with tailored properties using dry particle coating,” Powder Technol., 117, 40–67 (2001).10.1016/S0032-5910(01)00314-X ↗
2. P. M. C. Lacey, “Developments in the theory of particle mixing,” J. Appl. Chem., 4, 257–268 (1954).10.1002/jctb.5010040504 ↗
3. R. Hogg, “Mixing and segregation in powders: evaluation, mechanisms, and processes,” Kona Powder Part. J., 27, 3–17 (2009).10.14356/kona.2009005 ↗
4. Van NhaPhuong Le, Thesis: Influence des propriétés physicochimiques du principe actif et du transporteur sur la performance aerodynamique des mélanges de poudre pour inhalation, University of Lille (2011).
5. N. Ehrhardt, M. Montagne, H. Berthiaux, et al., “Assessing the homogeneity of powder mixtures by on-line electrical capacitance,” Chem. Eng. Process. Process Intensif., 44, 303–313 (2005).10.1016/j.cep.2004.03.016 ↗
6. C.-Y. Yang and X.-Y. Fu, “Development and validation of a material-labeling method for powder process characterization using X-ray computed tomography,” Powder Technol., 146, 10–19 (2004).10.1016/j.powtec.2004.06.011 ↗
7. D. R. Van Puyvelde, “Comparison of discrete elemental modelling to experimental data regarding mixing of solids in the transverse direction of a rotating kiln,” Chem. Eng. Sci., 61, 4462–4465 (2006).10.1016/j.ces.2006.02.013 ↗
8. G. Van de Wower, P. Scheunders, and D. Van Dyck, “Statistical texture characterization from discrete wavelet representations,” IEEE Trans. Image Process., 8, 592–598 (1998).10.1109/83.753747 ↗
9. F. Tomita and S. Tsuji, Computer Analysis of Visual Textures, Kluwer Academic Publishing, Massachusetts (1990).10.1007/978-1-4613-1553-7 ↗
10. B. Daumann and H. Nirschl, “Assessment of the mixing efficiency of solid mixtures by means of image analysis,” Powder Technol., 182, 415–423 (2008).10.1016/j.powtec.2007.07.006 ↗
11. E. M. Alander, M. S. Uusi-Penttila, and A. C. Rasmuson, “Characterization of paracetamol agglomerates by image analysis and strength measurement,” Powder Technol., 130, 298–306 (2003).10.1016/S0032-5910(02)00208-5 ↗
12. H. H. Berthiaux, V. Mosorov, L. Tomczak, et al., “Principal component analysis for characterizing homogeneity in powder mixing using image processing techniques,” Chem. Eng. Process., 45, 397–403 (2006).10.1016/j.cep.2005.10.005 ↗
13. S. R. Luke, C. Joao, V. F. Mark, and K. Kevin, “Aerodynamic characteristics of a wing-and-flap configuration in ground effect and yaw,” Proc. Inst. Mech. Eng. Part D: J. Automob. Eng., 230, 841–854 (2016).10.1177/0954407015596274 ↗
14. A. Realpe and C. Velázquez, “Image processing and analysis for determination of concentrations of powder mixtures,” Powder Technol., 134, 193–200 (2003).10.1016/S0032-5910(03)00138-4 ↗
15. C. Long, B. Mingyuan, L. Yugong, and L. Keqiang, “Real-time identification of the tire–road friction coefficient using an unscented Kalman filter and mean-square-error-weighted fusion,” Proc. Inst. Mech. Eng., Part D: J. Automob. Eng., 230, 788–802 (2016).10.1177/0954407015595725 ↗
16. N. Lepré, F. Robbe-Valloire, D. Alleaume, and G. Bouquet, “Recherche et caractérisation d’une garniture de frein à tambour,” in: Actes des Journées Européennes de Freinage (12–13 December, 1995), Lille, pp. 301–310.
17. J. Bridgwater, “Mixing of powders and granular materials by mechanical means-a perspective,” Particuology, 10, 397–427 (2012).10.1016/j.partic.2012.06.002 ↗
18. D. R. Van Puyvelde, B. R. Young, M. A. Wilson, and S. J. Schmidt, “Experimental determination of transverse mixing kinetics in a rolling drum by image analysis,” Powder Technol., 106, 183–191 (1999).10.1016/S0032-5910(99)00074-1 ↗
19. M. A. I. Schutyser, J. T. Padding, F. J. Weber, et al., “Discrete particle simulation predicting mixing behavior of solid substrate particles in a rotating drum fermenter,” Biotechnol. Bioeng., 75, 666–675 (2001).10.1002/bit.1192 ↗
20. C. E. Honeycutt and R. Plotnick, “Image analysis techniques and gray level co-occurrence matrices (GLCM) for calculating bioturbation indices and charactering biogenic sedimentary structures,” Comput. Geosci., 34, 1461–1472 (2008).10.1016/j.cageo.2008.01.006 ↗
21. R. Gosselin, C. Duchesne, and D. Rodrigue, “On the characterization of polymer powders mixing dynamics by texture analysis,” Powder Technol., 18, 177–188 (2008).10.1016/j.powtec.2007.07.021 ↗
22. B. Daumann, A. Fath, H. Anlauf, and H. Nirschl, “Determination of the mixing time in a discontinuous powder mixer by using image analysis,” Chem. Eng. Sci., 64, 2320–2331 (2009).10.1016/j.ces.2009.01.032 ↗
23. M. Baklouti, R. Elleuch, A.-L. Cristol, et al., “Relationships between the heterogeneous microstructure, the mechanical properties and the braking behavior of an organic brake lining material,” Proc. Inst. Mech. Eng., Part D: J. Automob. Eng., 227, 549–560 (2013).10.1177/0954407012461751 ↗
24. R. L. Carr, “Evaluating flow properties of solids,” Chem. Eng., 72, 163–16 (1965).
25. European Pharmacopoeia 7.0, Chapter 2.9.36, Powder Fow (2010), p. 308.
26. M. Leturia, M. Benali, S. Lagarde, et al., “Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods,” Powder Technol., 253, 406–423 (2014).10.1016/j.powtec.2013.11.045 ↗
27. V. Ganesan, K. A. Rosentrater, and K. Muthukumarappan, “Flowability and handling characteristics of bulk solids and powders—a review with implications for DDGS,” Biosyst. Eng., 101, 425–435 (2008).10.1016/j.biosystemseng.2008.09.008 ↗
28. D. J. Craik and B. F. Miller, “The flow properties of powders under humid conditions,” J. Pharm. Pharmacol., 10, 136T–144T (1958).10.1111/j.2042-7158.1958.tb10392.x ↗
29. G. Lumay, F. Boschini, K. Traina, et al., “Measuring the flowing properties of powders and grains,” Powder Technol., 224, 19–27 (2012).10.1016/j.powtec.2012.02.015 ↗
30. H. Hausner, “Friction conditions in a mass of metal powder,” Int. J. Powder Metall., 3, 7–13 (1967).
31. H. J. Venables and J. I. Wells, “Powder mixing,” Drug Dev. Ind. Pharm., 27, No. 7, 599–612 (2001).10.1081/DDC-100107316 ↗
32. P. W. Cleary, “Particulate mixing in a plough share mixer using DEM with realistic shaped particles,” Powder Technol., 248, 103–120 (2013).10.1016/j.powtec.2013.06.010 ↗
33. A. AitAissa, C. Duchesne, and D. Rodrigue, “Polymer powders mixing part I: Mixing characterization in rotating cylinders,” Chem. Eng. Sci., 65, 786–795 (2010).10.1016/j.ces.2009.09.031 ↗
34. J. O. Johansson, “Measuring homogeneity of planar point-patterns by using kurtosis,” Pattern Recognit. Lett., 21, 1149–1156 (2000).10.1016/S0167-8655(00)00076-3 ↗
35. V. Swaminathan and D. O. Kildsig, “Polydisperse powder mixtures: effect of particle size and shape on mixture stability,” Drug Dev. Ind. Pharm., 28, No. 1, 41–8 (2002).10.1081/DDC-120001484 ↗
36. S. Massol-Chaudeur, H. Berthiaux, and J. A. Dodds, “Experimental study of the mixing kinetics of binary pharmaceutical powder mixtures in a laboratory hoop mixer,” Chem. Eng. Sci., 57, 4053–4065 (2002).10.1016/S0009-2509(02)00262-2 ↗
37. A. K. Bledzki, M. Letma, A. Viksne, and L. Rence, “A comparison of compounding processes and wood type for wood fiber—PP composites,” Composites Part A, 36, 789–797 (2005).10.1016/j.compositesa.2004.10.029 ↗