Study of Processing and Microstructure of Copper Composite Reinforced with Graphene Nanosheet by Powder Metallurgy Technique
Source abstract
Abstract
Copper (Cu) composite reinforced with graphene nanosheet (GNS) is obtained by powder metallurgy technique. The microstructure and mechanical properties were investigated based on the Cu composite reinforced with various GNS content (0, 1, and 2 wt.%). The characterization is carried out through Raman spectra (RS), Fourier transform infrared (FTIR), X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), and transmission electron microscopy (TEM). The results show that GNS is uniformly dispersed in the Cu particle. Raman spectra and FTIR demonstrate the reduction of GNS from Graphene oxide (GO) oxide in GNS after heat treatment at 550 and 650°C. The TEM analysis confirms GNS to be 3–5 nm in size. During compression tests, the Cu–2 wt.% GNS composite demonstrates 9% higher compressive stress compared to pure Cu.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. I. A. Ibrahim, F. A. Mohamed, and E. J. Lavernia, “Particulate reinforced metal matrix composites—a review,” J. Mater. Sci., 26, No. 5, 1137–1156 (1991).10.1007/BF00544448 ↗
2. S. C. Tjong, “Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and GNSs,” Mater. Sci. Eng.: R: Reports, 74, No. 10, 281–350 (2013).10.1016/j.mser.2013.08.001 ↗
3. N. Leema, P. Radha, S. C. Vettivel, and H. K. Nehemiah, “Characterization, pore size measurement and wear model of a sintered Cu–W nanocomposite using radial basis functional neural network,” Mater. Design., 68, 195–206 (2015).10.1016/j.matdes.2014.11.035 ↗
4. S. C. Vettivel, N. Selvakumar, N. Leema, and A. N. Lenin, “Electrical resistivity, wear map and modeling of extruded tungsten reinforced copper composite,” Mater. Design., 56, 791–806 (2014).10.1016/j.matdes.2013.11.070 ↗
5. S. F. Moustafa, S. A. El-Badry, A. M. Sanad, and B. Kieback, “Friction and wear of copper–graphite composites made with Cu-coated and uncoated graphite powders,” Wear, 253, No. 7, 699–710 (2002).10.1016/S0043-1648(02)00038-8 ↗
6. X. C. Ma, G. Q. He, D. H. He, et al., “Sliding wear behavior of copper–graphite composite material for use in maglev transportation system,” Wear, 265, No. 7, 1087–1092 (2008).10.1016/j.wear.2008.02.015 ↗
7. A. Baradeswaran, S. C. Vettivel, A. E. Perumal, et al., “Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminum hybrid composites,” Mater. Design., 63, 620–632 (2014).10.1016/j.matdes.2014.06.054 ↗
8. S. P. Rawal, “Metal-matrix composites for space applications,” JOM, 53, No. 4, 14–17 (2001).10.1007/s11837-001-0139-z ↗
9. J. N. Wei, D. Y. Wang, W. J. Xie, et al., “Effects of macroscopic graphite particulates on the damping behavior of Zn–Al eutectoid alloy,” Phys. Letters A., 366, No. 1, 134–136 (2007).10.1016/j.physleta.2007.01.061 ↗
10. J. Zhang, R. J. Perez, C. R. Wong, and E. J. Lavernia, “Effects of secondary phases on the damping behaviour of metals, alloys and metal matrix composites,” Mater. Sci. Eng.: R: Reports, 13, No. 8, 325–389 (1994).10.1016/0927-796X(94)90010-8 ↗
11. N. V. Ponraj, A. Azhagurajan, and S. C. Vettivel, “Microstructure, consolidation and mechanical behaviour of Mg/n-TiC composite,” Alex. Eng. J., 55, No. 3, 2077–2086 (2016).10.1016/j.aej.2016.06.033 ↗
12. L. Y. Chen, H. Konishi, A. Fehrenbacher, et al., “Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites,” Scripta Mater., 67, No. 1, 29–32 (2012).10.1016/j.scriptamat.2012.03.013 ↗
13. N. P. Kim and J. P. Huang, Graphene Nanoplatelet Metal Matrix, U.S. Patent No. US8263843 B2, Appl. Nov. 6, 2009, Publ. September 11, 2012.
14. C. Lee, X. Wei, J. W. Kysar, and J. Hone, “Measurement of the elastic properties and intrinsic strength of monolayer graphene,” Science, 321, No. 5887, 385–388 (2008).10.1126/science.1157996 ↗
15. A. A. Balandin, S. Ghosh, W. Bao, et al., “Superior thermal conductivity of single-layer graphene,” Nano Letters, 8, No. 3, 902–907 (2008).10.1021/nl0731872 ↗
16. W. J. Kim, T. J. Lee, and S. H. Han, “Multi-layer graphene/copper composites: Preparation using high-ratio differential speed rolling, microstructure and mechanical properties,” Carbon. 69, 55–65 (2014).10.1016/j.carbon.2013.11.058 ↗
17. Y. J. Dappe, M. A. Basanta, F. Flores, and J. Ortega, “Weak chemical interaction and van der Waals forces between graphene layers: A combined density functional and intermolecular perturbation theory approach,” Phys. Rev. B., 74, No. 20, ID: 205434 (2006).
18. D. Wei, L. Xie, K. K. Lee, et al., “Controllable unzipping for intramolecular junctions of graphene nanoribbons and single-walled carbon nanotubes,” Nature Comm., 4, No. 1374 (2013).10.1038/ncomms2366 ↗
19. F. V. Tikhonenko, A. A. Kozikov, A. K. Savchenko, and R. V. Gorbachev, “Transition between electron localization and antilocalization in graphene,” Phys. Rev. Letters., 103, No. 22, ID: 226801 (2012).10.1103/PhysRevLett.103.226801 ↗
20. Y. Feng, X. Zhang, Y. Shen, at al., “A mechanically strong, flexible and conductive film based on bacterial cellulose/graphene nanocomposite,” Carb. Polymers, 87, No. 1, 644–649 (2012).
21. H. Chen, M. B. Müller, K. J. Gilmore, and G. G. Wallace, “Mechanically strong, electrically conductive, and biocompatible graphene paper,” Adv. Mater., 20, No. 18, 3557–3561 (2008).10.1002/adma.200800757 ↗
22. D. Li, M. B. Mueller, S. Gilje, and R. B. Kaner, “Processable aqueous dispersions of GNSs,” Nat. Nanotechnol., 3, No. 2, 101–105 (2008).10.1038/nnano.2007.451 ↗
23. J. Liu, U. Khan, J. Coleman, et al., “Graphene oxide and GNS reinforced aluminum matrix composites: Powder synthesis and prepared composite characteristics,” Mater. Design, 94, 87–94 (2016).10.1016/j.matdes.2016.01.031 ↗
24. X. Liu, D. Wei, L. Zhuang, et al., “Fabrication of high-strength GNSs/Cu composites by accumulative roll bonding,” Mater. Sci. Eng.: A, 642, 1–6 (2015).10.1016/j.msea.2015.06.032 ↗
25. X. J. Long, B. Li, L. Wang, et al., “Shock response of Cu/graphene nanolayered composites,” Carbon, 103, 457–463 (2016).10.1016/j.carbon.2016.03.039 ↗
26. B. W. Wei, D. Qu, C. F. Hu, et al., “Synthesis and physical properties of GNSs reinforced copper composites,” Adv. Mater. Research., 833, 310–314 (2014).10.4028/www.scientific.net/AMR.833.310 ↗
27. J. Wang, Z. Li, G. Fan, et al., “Reinforcement with GNSs in aluminum matrix composites,” Scr. Mater., 66, No. 8, 594–597 (2012).10.1016/j.scriptamat.2012.01.012 ↗
28. S. F. Bartolucci, J. Paras, M. A. Rafiee, et al., “Graphene–aluminum nanocomposites,” Mater. Sci. Eng.: A, 528, No. 27, 7933–7937 (2011).10.1016/j.msea.2011.07.043 ↗
29. S. M. Uddin, T. Mahmud, C. Wolf, et al., “Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites,” Comp. Sci. Technol., 70, No. 16, 2253–2257 (2010).10.1016/j.compscitech.2010.07.012 ↗
30. W. S. Hummers Jr., and R. E. Offeman, “Preparation of graphitic oxide,” J. Amer. Chem. Soc., 80, No. 6, 1339–1349 (1958).10.1021/ja01539a017 ↗
31. L. Jiang, G. Fan, Z. Li, et al., “An approach to the uniform dispersion of a high-volume fraction of carbon nanotubes in aluminum powder,” Carbon, 49, No. 6, 1965–1971 (2011).10.1016/j.carbon.2011.01.021 ↗
32. T. Yamaoka, Y. Tabata, and Y. Ikada, “Comparison of body distribution of poly (vinyl alcohol) with other watersoluble polymers after intravenous administration,” J. Pharm. Pharmacol., 47, No. 6, 479–486 (1995).10.1111/j.2042-7158.1995.tb05835.x ↗
33. N. V. Ponraj, et al., “Effect of milling on dispersion of graphene nanosheet reinforcement in different morphology copper powder matrix,” Surf. Inter., 9, 260–265 (2017).
34. D. J. Shanefield, Organic Additives and Ceramic Processing: with Applications in Powder Metallurgy, Ink, and Paint, Springer Science + Business Media, New York (2013), p. 311.
35. L. Jiang, G. Fan, Z. Li, et al., “An approach to the uniform dispersion of a high-volume fraction of carbon nanotubes in aluminum powder,” Carbon, 49, No. 6, 1965–1971 (2011).10.1016/j.carbon.2011.01.021 ↗
36. J. Liang, Y. Huang, L. Zhang, et al., “Molecular-level dispersion of graphene into poly (vinyl alcohol) and effective reinforcement of their nanocomposites,” Adv. Func. Mater., 19, No. 14, 2297–2302 (2009).10.1002/adfm.200801776 ↗
37. M. M. Gudarzi and F. Sharif, “Molecular level dispersion of graphene in polymer matrices using colloidal polymer and graphene,” J. Col. Inter. Sci., 366, No. 1, 44–50 (2012).10.1016/j.jcis.2011.09.086 ↗
38. R. A. Bowling, “A theoretical review of particle adhesion,” in: Particles on Surfaces, Springer Nature, New York (1988), pp. 129–142.10.1007/978-1-4615-9531-1_10 ↗
39. H. C. Schniepp, J. L. Li, M. J. McAllister, et al., “Functionalized single graphene sheets derived from splitting graphite oxide,” J. Phys. Chem. B, 110, No. 17, 8535–8539 (2006).10.1021/jp060936f ↗
40. K. H. Liao, A. Mittal, S. Bose, et al., “Aqueous only route toward graphene from graphite oxide,” Acs. Nano, 5, No. 2, 1253–1258 (2011).10.1021/nn1028967 ↗
41. J. Hwang, T. Yoon, S. H. Jin, et al., “Enhanced mechanical properties of graphene/copper nanocomposites using a molecularlevel mixing process,” Adv. Mater., 25, No. 46, 6724–6729 (2013).10.1002/adma.201302495 ↗
42. S. I. Cha, K. T. Kim, S. N. Arshad, et al., “Extraordinary strengthening effect of carbon nanotubes in metalmatrix nanocomposites processed by molecular-level mixing,” Adv. Mater., 17, No. 11, 1377–1381 (2005).10.1002/adma.200401933 ↗
43. M. Li, H. Che, X. Liu, et al., “Highly enhanced mechanical properties in Cu matrix composites reinforced with graphene decorated metallic nanoparticles,” J. Mater. Sci., 49, No. 10, 3725–3731 (2014).10.1007/s10853-014-8082-x ↗
44. Y. Tang, X. Yang, R. Wang, and M. Li, “Enhancement of the mechanical properties of graphene–copper composites with graphene–nickel hybrids,” Mater. Sci. Eng.: A, 599, 247–254 (2014).10.1016/j.msea.2014.01.061 ↗
45. N. V. Ponraj, “Graphene nanosheet as reinforcement agent in copper matrix composite by using powder metallurgy method,” Surf. Inter., 6, 190–196 (2017).
46. B. Wang, W. Lou, X. Wang, and J. Hao, “A gel–sol transition phenomenon of oxidation multi-walled carbon nanotubes–glycerol nanofluids induced by polyvinyl alcohol,” New J. Chem., 36, No. 5, 1273–1279 (2012).10.1039/c2nj20977b ↗
47. J. N. Ding, Y. Fan, C. X. Zhao, et al., “Electrical conductivity of waterborne polyurethane/graphene composites prepared by solution mixing,” J. Comp. Mater., 46, No. 6, 747–752 (2012).10.1177/0021998311413835 ↗
48. S. Park, J. An, R. D. Piner, et al., “Aqueous suspension and characterization of chemically modified graphene sheets,” Chem. Mater., 20, No. 21, 6592–6594 (2008).10.1021/cm801932u ↗
49. B. Das, K. E. Prasad, U. Ramamurty, and C. N. R. Rao, “Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene,” Nanotechnology, 20, No. 12, ID: 125705 (2009).10.1088/0957-4484/20/12/125705 ↗
50. H. Hu, X. Wang, F. Liu, et al., “Rapid microwave-assisted synthesis of GNSs–zinc sulfide nanocomposites: optical and photocatalytic properties,” Synth. Metals, 161, No. 5, 404–410 (2011).10.1016/j.synthmet.2010.12.018 ↗
51. A. Jung, R. Graupner, L. Ley, and A. Hirsch, “Quantitative determination of oxidative defects on single walled carbon nanotubes,” Basic Solid State Physics, 243, No. 13, 3217–3220 (2006).10.1002/pssb.200669128 ↗
52. S. H. Huh, “Thermal reduction of graphene oxide,” in: Physics and Applications of Graphene – Experiments, INTECH Open Access Publisher (2011), pp. 73–90.
53. M. J. McAllister, J. L. Li, D. H. Adamson, et al., “Single sheet functionalized graphene by oxidation and thermal expansion of graphite,” Chem. Mater., 19, No. 18, 4396–4404 (2007).10.1021/cm0630800 ↗
54. W. Wei and X. Qu, “Extraordinary physical properties of functionalized graphene,” Small., 8, No. 14, 2138–2151 (2012).10.1002/smll.201200104 ↗
55. C. Xu, X. Wang, and J. Zhu, “Graphene–metal particle nanocomposites,” J. Phys. Chem.: C, 112, No. 50, 19841–19845 (2008).10.1021/jp807676n ↗
56. S. T. Shipman, P. C. Douglass, H. S. Yoo, et al., “Vibrational dynamics of carboxylic acid dimers in gas and dilute solution,” Phys. Chem. Chem. Physics, 9, No. 32, 4572–4586 (2007).10.1039/b704900e ↗
57. C. Zhang, D. M. Dabbs, L. M. Liu, et al., “Combined effects of functional groups, lattice defects, and edges in the infrared spectra of graphene oxide,” J. Phys. Chem.: C, 119, No. 32, 18167–18176 (2015).
58. S. C. Vettivel, N. Selvakumar, and N. V. Ponraj, “Tribological behavior of Cu–5W sintered powder composite,” Adv. Mater. Research, 622, 1300–1304 (2013).
59. S. C. Vettivel, N. Selvakumar, and N. V. Ponraj, “Mechanical behavior of sintered Cu–5% W nano powder composite,” Proc. Eng., 38, 2874–2880 (2012).10.1016/j.proeng.2012.06.336 ↗
60. Y. Liu and P. Wu, “Graphene quantum dot hybrids as efficient metal-free electrocatalyst for the oxygen reduction reaction,” ACS Appl. Mater. Int., 5, No. 8, 3362–3369 (2013).10.1021/am400415t ↗
61. Y. Fan, L. Wang, J. Li, et al., “Preparation and electrical properties of GNS/Al2O3 composites,” Carbon, 48, No. 6, 1743–1749 (2010).10.1016/j.carbon.2010.01.017 ↗
62. N. H. Alrasheedi, “Facile Synthesis and characterization of Aluminum/Graphene nanosheets composites,” Arab. J. Sci. Eng., 41, No. 11, 4391–4395 (2016).10.1007/s13369-015-1894-4 ↗
63. D. B. Butrymowicz, J. R. Manning, and M. E. Read, “Diffusion in copper and copper alloys. Part I: Volume and surface self-diffusion in copper,” J. Phys. Chem. Ref. Data, 2, No. 3, 643–656 (1973).10.1063/1.3253129 ↗