Hydrogen-sorption properties of (Ti, Zr)Mn2–x intermetallic alloy
Source abstract
Abstract
The microstructure and phase composition of 15.4 at.% Ti–30.2 at.% Zr–54.4 at.% Mn as-cast alloy as well as the phase composition of hydrogenation and desorption products are studied with optical microscopy and X-ray diffraction. It is found that the alloy under study is able to rapidly absorb hydrogen (up to H/Me ≈ 1.5) at room temperature and 0.6 MPa pressure without preliminary activation. It is shown that released hydrogen restores oxide films formed on the material during hydrogenation ensuring surface self-purification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. C. A. McAuliffe, Hydrogen and Energy, London (1980), p. 147.10.1007/978-1-349-02635-7 ↗
2. T. Yamashita, T. Gamo, Y. Moriwaki, et al., “Ti–Mn alloys as hydrogen storage materials,” Nippon Kinzoku Gakkaishi, 41, 148–150 (1977).
3. S. Samboshi, N. Masahashi, and S. Hanada, “Effect of composition on hydrogen absorbing properties in binary TiMn2 based alloys,” J. Alloys Compd., 352, 210–217 (2003).10.1016/S0925-8388(02)01125-8 ↗
4. S. Semboshi, N. Masahashi, and S. Hanada, “Degradation of hydrogen absorbing capacity in hydrogenated TiMn2,” Acta Mater., 49, 927–935 (2001).10.1016/S1359-6454(00)00371-2 ↗
5. B. K. Singh, A. K. Singh, A. M. Imam, et al., “On the structural characteristics and hydrogenation behavior of TiMn1.5 hydrogen storage material,” Int. J. Hydrogen Energy, 26, No. 8, 817–821 (2001).10.1016/S0360-3199(01)00012-X ↗
6. M. J. Choi, H. S. Hong, and K. S. Lee, “Electrochemical characteristics of the composite metal hydride of TiFe and TiMn2 synthesized by mechanical alloying,” J. Alloys Compd., 358, No. 1–2, 306–311 (2003).10.1016/S0925-8388(03)00077-X ↗
7. T. Gamo, Y. Moriwaki, N. Yanagihara, et al., “Life properties of Ti–Mn alloy hydrides and their hydrogen purification effect,” J. Less-Comm. Met., 89, 495–499 (1983).10.1016/0022-5088(83)90361-2 ↗
8. X. Y. Song, Y. Chen, Z. Zhang, et al., “Microstructure and electrochemical properties of Ti-containing AB2 type hydrogen storage electrode alloy,” Int. J. Hydrogen Energy, 25, 649–656 (2000).10.1016/S0360-3199(99)00080-4 ↗
9. B. H. Liu, D. M. Kim, K. Y. Lee, et al., “Hydrogen storage properties of TiMn2-based alloys,” J. Alloys Compd., 240, No. 1–2, 214–218 (1996).
10. J. G. Park, H. Y. Jang, S. C. Han, et al., “Hydrogen storage properties of TiMn2-based alloys for metal hydride heat pump,” Mater. Sci. Eng., 329–331, 351–355 (2002).10.1016/S0921-5093(01)01598-2 ↗
11. A. Ming, F. Pourarian, S. G. Sankar, et al., “TiMn2-based alloys as high hydrogen storage materials,” Mater. Sci. Eng., 33, 53–57 (1995).10.1016/0921-5107(94)01212-1 ↗
12. M. Yoshida and E. Akiba, “Hydrogen absorbing–desorbing properties and crystal structure of the Zr–Ti– Ni–Mn–V AB2 Laves-phase alloys,” J. Alloys Compd., 224, No. 1, 121–126 (1995).10.1016/0925-8388(95)01518-3 ↗
13. H. Oesterreicher and H. Bittner, “Studies of hydride formation in Ti1–x Zr x Mn2,” Mater. Res. Bull., 13, 83–88 (1978).10.1016/0025-5408(78)90031-4 ↗
14. I. Jacob, A. Stern, A. Moran, et al., “Hydrogen absorption in (Zr x Ti1–x )B2 (B ≡ Cr, Mn) and the phenomenological model for the absorption capacity in pseudo-binary Laves-phase compounds,” J. Less-Comm. Met., 73, 369–376 (1980).10.1016/0022-5088(80)90331-8 ↗
15. J. L. Bobet, B. Chevalier, and T. B. Darrie, “Crystallographic and hydrogen sorption properties of TiMn2 based alloys,” Intermetallics, 8, 359–363 (2000).10.1016/S0966-9795(99)00092-8 ↗
16. H. Taizhong, W. Zhu, Y. Xuebin, et al., “Hydrogen absorption–desorption behavior of zirconium-substituting Ti–Mn based hydrogen storage alloys,” Intermetallics, 12, No. 1, 91–96 (2004).10.1016/j.intermet.2003.08.005 ↗
17. V. A. Dekhtyarenko, “Phase equilibria in the Ti–Zr–Mn system,” Metaloznav. Obrob. Met., No. 3, 48–51 (2011).
18. V. Ivanchenko, V. Gavrylenko, V. Pogorelaya, et al., “Phase equilibria in the Ti–TiMn2–ZrMn2–Zr partial system,” Chem. Met. Alloys, 1, No. 1, 67–72 (2008).10.30970/cma1.0004 ↗
19. V. Ivanchenko, T. Preadko, V. Dekhtyarenko, et al., “Hydrogen absorbing properties of a Ti–Zr–Mn eutectic alloy,” Chem. Met. Alloys, 1, No. 2, 133–136 (2008).10.30970/cma1.0044 ↗
20. V. N. Svechnikov, Yu. A. Boiko, G. F. Kobzenko, et al., “Laboratory equipment for study of refractory and chemically active metals,” in: Application of Vacuum in Metallurgy [in Russian], Izd. Akad. Nauk SSSR, Moscow (1963), pp. 185–194.
21. G. G. Kobzenko and A. A. Shkola, “Reactor apparatus for studying the physicochemical processes of gas saturation,” Zavod. Lab., No. 7, 41–45 (1990).
22. O. M. Ivasishin, V. T. Cherepin, V. N. Kolesnik, et al., “Automated dilatometric system,” Prib. Tekh. Éksp., No. 3, 147–151 (2010).
23. T. B. Massalski, J. L. Murray, L. H. Bennett, and H. Baker, Binary Alloy Phase Diagrams, Am. Society Met., Ohio (1986), p. 2224.
24. O. M. Ivasihin, O. B. Bondarchuk, M. M. Gumenyuk, et al., “Surface phenomena during heating of titanium hydride powder,” Fiz. Khim. Tverd. Tela, 12, No. 4, 900–907 (2011).