journal article·2021-01

Effect of Various Additives on the Hydrolysis Performance of Nanostructured MgH2 Synthesized by High-Energy Ball Milling in Hydrogen

D.S. Korablov, O.V. Bezdorozhev, S. Gierlotka, V.A. Yartys, Yu.M. Solonin

Powder Metallurgy and Metal Ceramics· Volume 59· Issue 9-10
Publisher page

Abstract

Magnesium hydride is a promising material for hydrogen generation via hydrolysis owing to high hydrogen storage capacity, mild reaction conditions, and low cost of magnesium metal. Unfortunately, the hydrolysis reaction of MgH2 is rapidly hindered due to the formation of a passive Mg(OH)2 layer. Various additives can be used to improve the efficiency of the reaction. The present study examines the influence of 5 wt.% EDTA and TiC–2TiB2 additives on the hydrolysis of the nanostructured MgH2 and compares it with the hydrolysis performance of pure MgH2 and MgH2 + 5 wt.% AlCl3 for the first time. MgH2 was synthesized by high-energy ball milling of Mg powder in hydrogen gas, while MgH2-based nanocomposites were prepared either by mixing the obtained MgH2 with 5 wt.% of additives or by milling Mg with 5 wt.% of additive in hydrogen. The synthesized MgH2 is nanosized, containing a mixture of β-MgH2 and high-pressure γ-modification of MgH2. The hydrogen generation performance in terms of MgH2 conversion rate and hydrogen yield was determined volumetrically. It was found that the MgH2 + 5 wt.% EDTA composite displays the lowest reactivity among the tested materials, probably due to the interaction of MgH2 with EDTA during the ball milling. Pure MgH2 and MgH2 + 5 wt.% (TiC–2TiB2) composite demonstrate almost twice as better hydrolysis performance, which is, however, still quite far from application requirements. The maximum hydrogen yield of 557 mL/g MgH2 and conversion rate of 30.3% was observed for MgH2 + 5 wt.% AlCl3 composition after 10 min of hydrolysis, which can be attributed to the destabilization of the Mg(OH)2 layer by chlorine ions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Ammonia Synthesis and Nitrogen Reduction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. M. Hirscher, V.A. Yartys, M. Baricco, J. Bellosta von Colbe, D. Blanchard, R.C. Bowman Jr., D.P. Broom, C.E. Buckley, F. Chang, P. Chen, Y.W. Cho, J.-C. Crivello, F. Cuevas, W.I.F. David, P.E. de Jongh, R.V. Denys, M. Dornheim, M. Felderhoff, Y. Filinchuk, G.E. Froudakis, D.M. Grant, E.A. MacGray, B.C. Hauback, T. He, T.D. Humphries, T.R. Jensen, S. Kim, Y. Kojima, M. Latroche, H.-W. Li, M.V. Lototskyy, J.W. Makepeace, K.T. Møller, L. Naheed, P. Ngene, D. Noreus, M.M. Nygard, S. Orimo, M. Paskevicius, L. Pasquini, D.B. Ravnsbaek, M.V. Sofianos, T.J. Udovic, T. Vegge, G.S. Walker, C.J. Webb, C. Weidenthaler, and C. Zlotea, “Materials for hydrogen-based energy storage – past, recent progress and future outlook. J. Alloys Compd., 827, 1–39 (2020). DOI: https://doi.org/10.1016/j.jallcom.2019.153548.10.1016/j.jallcom.2019.153548 ↗
2. U. Eberle, M. Felderhoff, and F. Schuth, “Chemical and physical solutions for hydrogen storage,” Angew. Chem. Int. Ed., 48, 6608–6630 (2009). DOI: https://doi.org/10.1002/anie.200806293.10.1002/anie.200806293 ↗
3. J. Bellosta von Colbe, J.-R. Ares, J. Barale, M. Baricco, C. Buckley, G. Capurso, N. Gallandat, D.M. Grant, M.N. Guzik, I. Jacob, E.H. Jensen, T. Jensen, J. Jepsen, T. Klassen, M.V. Lototskyy, K. Manickam, A. Montone, J. Puszkiel, S. Sartori, D.A. Sheppard, A. Stuart, G. Walker, C.J. Webb, H. Yang, V. Yartys, A. Züttel, and M. Dornheim, “Application of hydrides in hydrogen storage and compression: Achievements, outlook and perspectives,” Int. J. Hydrogen Energy, 44, Issue 15, 7780–7808 (2019). DOI: https://doi.org/10.1016/j.ijhydene.2019.01.104.10.1016/j.ijhydene.2019.01.104 ↗
4. V.A. Yartys, M.V. Lototskyy, E. Akiba, R. Albert, V.E. Antonov, J.R. Ares, M. Baricco, N. Bourgeois, C.E. Buckley, J.M. Bellosta von Colbe, J.-C. Crivello, F. Cuevas, R.V. Denys, M. Dornheim, M. Felderhoff, D.M. Grant, B.C. Hauback, T.D. Humphries, I. Jacob, T.R. Jensen, P.E. de Jongh, J.-M. Joubert, L. Popilevsky, V.M. Skripnyuk, E. Rabkin, M.V. Sofianos, A. Stuart, G. Walker, H. Wang, C.J. Webb, and M. Zhu, “Magnesium based materials for hydrogen based energy storage: Past, present and future,” Int. J. Hydrogen Energy, 44, Issue 15, 7809–7859 (2019). DOI: https://doi.org/10.1016/j.ijhydene.2018.12.212.10.1016/j.ijhydene.2018.12.212 ↗
5. J.-C. Crivello, B. Dam, R.V. Denys, M. Dornheim, D.M. Grant, J. Huot, T.R. Jensen, P. de Jongh, M. Latroche, C. Milanese, D. Milcius, G.S. Walker, C.J. Webb, C. Zlotea, and V.A. Yartys, “Review of magnesium hydridebased materials: development and optimization,” Appl. Phys. A. 122, No. 97, 1–20 (2016). DOI: https://doi.org/10.1007/s00339-016-9602-0.10.1007/s00339-016-9602-0 ↗
6. T. Sadhasivam, H.-T. Kim, S. Jung, S.-H. Roh, J.-H. Park, and H.-Y. Jung, “Dimensional effects of nanostructured Mg/MgH2 for hydrogen storage applications: A review,” Renewable Sustainable Energy Rev., 27, 523–534 (2017). DOI: https://doi.org/10.1016/j.rser.2017.01.107.10.1016/j.rser.2017.01.107 ↗
7. Y. Wang and Y. Wang, “Recent advances in additive-enhanced magnesium hydride for hydrogen storage. Prog. Nat. Sci.,” 27, Issue 1, 41–49 (2017). DOI: https://doi.org/10.1016/j.pnsc.2016.12.016.10.1016/j.pnsc.2016.12.016 ↗
8. Y. Sun, C. Shen, Q. Lai, W. Liu, D.-W. Wang, and K.-F. Aguey-Zinsou, “Tailoring magnesium based materials for hydrogen storage through synthesis: Current state of the art,” Energy Storage Mater., 10, 168–198 (2018). DOI: https://doi.org/10.1016/j.ensm.2017.01.010.10.1016/j.ensm.2017.01.010 ↗
9. Malka I.E., Czujko T., Bystrzycki J. Catalytic effect of halide additives ball milled with magnesium hydride. Int. J. Hydrogen Energy. 2010. Vol. 35, Issue 4. P. 1706–1712. DOI: https://doi.org/10.1016/j.ijhydene.2009.12.024.10.1016/j.ijhydene.2009.12.024 ↗
10. F.D. Manilevich, Yu.K. Pirskyy, B.I. Danil’tsev, A.V. Kutsyi, and V.A. Yartys, “Studies of the hydrolysis of aluminum activated by additions of Ga–In–Sn eutectic alloy, bismuth, or antimony,” Mater. Sci., 55, No. 4, 536–547 (2020). DOI: https://doi.org/10.1007/s11003-020-00336-x.10.1007/s11003-020-00336-x ↗
11. S.-H. Hong, H.-J. Kim, and M.Y. Song, “Rate enhancement of hydrogen generation through the reaction of magnesium hydride with water by MgO addition and ball milling,” J. Ind. Eng. Chem., 18, Issue 1, 405–408 (2012). DOI: https://doi.org/10.1016/j.jiec.2011.11.104.10.1016/j.jiec.2011.11.104 ↗
12. L. Laversenne, C. Goutaudier, R. Chiriac, C. Sigala, and B. Bonnetot, “Hydrogen storage in borohydrides: Comparison of hydrolysis conditions of LiBH4, NaBH4 and KBH4,” J. Therm. Anal. Calorim., 94, 785–790 DOI: https://doi.org/10.1007/s10973-008-9073-4.10.1007/s10973-008-9073-4 ↗
13. M. Tegel, S. Schone, B. Kieback, and L. Röntzsch, “An efficient hydrolysis of MgH2-based materials,” Int. J. Hydrogen Energy, 42, Issue 4, 2167–2176 (2017). DOI: https://doi.org/10.1016/j.ijhydene.2016.09.084.10.1016/j.ijhydene.2016.09.084 ↗
14. B.H. Liu and Z.P. Li, “A review: Hydrogen generation from borohydride hydrolysis reaction,” J. Power Sources, 187, Issue 2, 527–534 (2009). DOI: https://doi.org/10.1016/j.jpowsour.2008.11.032.10.1016/j.jpowsour.2008.11.032 ↗
15. A.S. Awad, E. El-Asmar, T. Tayeh, F. Mauvy, M. Nakhl, M. Zakhour, and J.L. Bobet, “Effect of carbons (G and CFs), TM (Ni, Fe, and Al) and oxides (Nb2O5 and V2O5) on hydrogen generation from ball milled Mgbased hydrolysis reaction for fuel cell,” Energy, 95, 175–186 (2016). DOI: https://doi.org/10.1016/j.energy.2015.12.004.10.1016/j.energy.2015.12.004 ↗
16. R.C. Ropp, Encyclopedia of the Alkaline Earth Compounds, Elsevier (2013),1216 p.10.1016/B978-0-444-59550-8.00001-6 ↗
17. Yu.V. Verbovytskyy, V.V. Berezovets, A.R. Kytsya, I.Yu. Zavaliy, and V.A. Yartys, “Hydrogen generation by hydrolysis of MgH2,” Physicochem. Mechan. Mater., 56, No. 1, 9–20 (2020).
18. S. Li, D.-Y. Gan, Y.-F. Zhu, Y.-N. Liu, G. Zhang, L.-Q. Li, “Influence of chloride salts on hydrogen generation via hydrolysis of MgH2 prepared by hydriding combustion synthesis and mechanical milling,” Trans. Nonferrous Met. Soc. China,” 27, 562–568 (2017). DOI: https://doi.org/10.1016/S1003-6326(17)60062-1.10.1016/S1003-6326(17)60062-1 ↗
19. T. Tayeh, A.S. Awad, M. Nakhl, M. Zakhour, J.-F. Silvain, and J.-L. Bobet, “Production of hydrogen from magnesium hydrides hydrolysis,” Int. J. Hydrogen Energy, 39, 3109–3117 (2014). DOI: https://doi.org/10.1016/j.ijhydene.2013.12.082.10.1016/j.ijhydene.2013.12.082 ↗
20. M.-H. Grosjean, M. Zidoune, and L. Roue, “Hydrogen production from highly corroding Mg-based materials elaborated by ball milling,” J. Alloys Compd., 404–406, 712–715 (2005). DOI: https://doi.org/10.1016/j.jallcom.2004.10.098.10.1016/j.jallcom.2004.10.098 ↗
21. M.P. Pitt, M. Paskevicius, C.J. Webb, D.A. Sheppard, C.E. Buckley, and E.MacA. Gray, “The synthesis of nanoscopic Ti based alloys and their effects on the MgH2 system compared with the MgH2 + 0.01Nb2O5 benchmark,” Int. J. Hydrogen Energy, 37, 4227–4237 (2012). DOI: https://doi.org/10.1016/j.ijhydene.2011.11.114.10.1016/j.ijhydene.2011.11.114 ↗
22. CRC Handbook of Chemistry and Physics, CRC Press, Boca Raton (1992), 2472 p.