Dry Sliding Wear Behaviour and Microstructure of the W–Ni–Fe and W–Ni–Cu Heavy Alloys Produced by Powder Metallurgy Technique
Source abstract
Abstract
The effects of Fe and Cu on the wear behaviour of W–Ni alloys is investigated. W–Ni–Fe and W–Ni–Cu alloys are produced with six different compositions by the powder metallurgy technique. The microstructure is examined after shaping and sintering. Electron microscopy (SEM+EDS) and X-ray diffraction (XRD) are used to characterize the density, hardness, and grain size of W–Ni–Fe and W–Ni–Cu alloys produced by powder metallurgy technique. A pin-on-disc apparatus is used for the wear tests. All of the samples are tested under loads of 20 and 30 N, at a rate of 1 m/s and for five different sliding distances. It is found that, in Fe and Cu alloys, an increase in the W amount results in an increase in density and hardness. Furthermore, an increase in the W amount leads to a decrease in the amount of the binding phase for W–Ni–Fe and W–Ni–Cu alloys with a W content of 90, 93, and 97%, and resultes in reduced weight loss for W–Ni–Fe alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. C. L. Chen and C. L. Huang, “Milling media and alloying effects on synthesis and characteristics of mechanically alloyed ODS heavy tungsten alloys,” Int. J. Refract. Met. Hard Mater., 44, 19–26 (2014).10.1016/j.ijrmhm.2014.01.007 ↗
2. Y. Jin, S. Cao, J. Zhu, et al., “Gradient structure induced by molybdenum in 90W–Ni–Fe heavy alloy,” Int. J. Refract. Met. Hard Mater., 43, 141–146 (2014).10.1016/j.ijrmhm.2013.11.017 ↗
3. H. J. Ryu, S. H. Hong, and W. H. Baek, “Microstructure and mechanical properties of mechanically alloyed and solid state sintered tungsten heavy alloys,” Mater. Sci. Eng. A, 291, 91–96 (2000).10.1016/S0921-5093(00)00968-0 ↗
4. S. G. Caldwell, “Heat Tteatment of tungsten alloys, Int. Powder Metall., 39, No. 7, 43–51 (2003).
5. S. J. Park, J. L. Johnson, Y. Wu, et al., “Analysis of the effect of solubility on the densification behaviour of tungsten heavy alloys using the master sintering curve approach,” Int. J. Refract. Met. Hard Mater., 37, 52–59 (2013).10.1016/j.ijrmhm.2012.10.016 ↗
6. L. Ding, D. P. Xiang, Y. Y. Li, et al., “Effects of sintering temperature on fine-grained tungsten heavy alloy produced by high-energy ball milling assisted spark plasma sintering,” Int. J. Refract. Met. Hard Mater., 33, 65–69 (2012).10.1016/j.ijrmhm.2012.02.017 ↗
7. H. Ibrahim, A. Aziz, and A. Rahmat, “Enhanced liquid-phase sintering of W–Cu composites by liquid infiltration,” Int. J. Refract. Met. Hard Mater., 43, 222–226 (2014).10.1016/j.ijrmhm.2013.12.004 ↗
8. H. Liu, S. Cao, J. Zhu, et al., “Densification, microstructure and mechanical properties of 90W–4Ni–6Mn heavy alloy,” Int. J. Refract. Met. Hard Mater., 37, 121–126 (2013).10.1016/j.ijrmhm.2012.11.006 ↗
9. J. Zhu, S. Cao, and H. Liu, “Fabrication of W-Ni-Fe alloys gradient structures”, Int. J. Refract. Met. Hard Mater., 36, 72–75 (2013).10.1016/j.ijrmhm.2012.03.017 ↗
10. N. K. Caliskan, N. Durlu, and S. Bor, “Swaging of liquid phase sintered 90W–7Ni–3Fe tungsten heavy alloy,” Int. J. Refract. Met. Hard Mater., 36, 260–264 (2013).10.1016/j.ijrmhm.2012.10.001 ↗
11. J. W. Noh, E. P. Kim, H. S. Song, et al., “Matrix penetration of W–W grain-baundaries and its effect on mechanical properties of 93W–5.6Ni–1.4Fe heavy alloys,” Metall. Trans. A, 24, No. 11, 2411–2416 (1993).10.1007/BF02646520 ↗
12. J. J. Dunkley, Powder Metallurgy, Metal Handbook, ASM International Publ., 7, No. 9, 111–112 (1998).
13. A. Upadhyaya, “Processing strategy for consolidation tungsten heavy alloys for ordnance applications,” Mater. Chem. Phys., 67, 101–110 (2001).10.1016/S0254-0584(00)00426-0 ↗
14. S. H. Hong and H. D. Ryu, “Combination of mechanical alloying and two-stage sintering of 93W–5.6Ni–1.4Fe tungsten heavy alloy,” Mater. Sci. Eng. A, 344, 253–260 (2003).10.1016/S0921-5093(02)00410-0 ↗
15. J. Liu and R. M. German, “Rearrangement densification in liquid-phase sintering,” Metall. Mater. Trans. A, 32, 3125–3131 (2001).10.1007/s11661-001-0187-6 ↗
16. A. Mondal, A. Upadhyaya, D. Agrawalc, “Effect of heating mode and sintering temperature on the consalidation of 90W–7Ni–3Fe alloys,” J. Alloy Compd., 509, 301–310 (2011).10.1016/j.jallcom.2010.09.008 ↗
17. R. M. German, Sintering Theory and Practice, John Wiley and Sons, Inc., New York (1996), pp. 169–170.
18. M. Kilic, An Investigation of the Effects of Cu and Fe Addition on Wear Behaviour of Tungsten Alloys, M.Sc. Thesis, Karabuk Univ. (2013).
19. R. M. German, S. C. Farooq, and M. Kipphut, “Kinetics of liquid phase sintering,” Mater. Sci. Eng. A, 105/106, 215–224 (1998).10.1016/0025-5416(88)90499-5 ↗
20. S. H. Islam, F. Akhtar, S. J. Askari, et al., “Tensile behavior change depending on the varying tungsten content of W–Ni–Fe alloys,” Int. J. Refract. Met. Hard Mater., 25, 380–385 (2007).10.1016/j.ijrmhm.2006.12.003 ↗
21. A. Belhadjhamida and R. M. German, “Tungsten and tungsten alloys by powder metallurgy,” (Annual Meeting and Exhibition of the Minerals, Metals, and Materials Society (TMS); New Orleans, LA (United States); 17–21 Feb., 1991), TMS, Warrandale, USA (1991), pp. 3–19.
22. D. Özyürek, M. Yildirim, I. Ciftci, “The tribological properties of A356–SiCp metal-matrix composites fabricated by thixomoulding technique,” Sci. Eng. Compos. Mater., 19, No. 4, 351–356 (2012).10.1515/secm-2012-0012 ↗
23. D. Özyürek and I. Ciftci, “An Investigation into wear behaviour of TiB2 particle reinforced aluminum composites produced by mechanical alloying,” Sci. Eng. Compos. Mater., 18, No. 1–2, 5–12 (2011).10.1515/secm.2011.003 ↗
24. D. Özyürek, S. Tekeli, A. Güral, et al., “Effect of Al2O3 amount on microstructure and wear properties of Al–Al2O3 metal matrix composites prepared using mechanical alloying method,” Powder Metall. Met. Ceramics, 49, Nos. 5–6, 289–294 (2010).10.1007/s11106-010-9235-3 ↗
25. A. Güral, S. Tekeli, D. Özyürek, and M. Gürü, “Effect of repeated quenching heat treatment on microstructure and dry sliding wear behavior of low carbon PM steel,” Mater. Sci. Forum, 534–536, 673–676 (2007).10.4028/www.scientific.net/MSF.534-536.673 ↗
26. D. Özyürek, S. Tekeli, T. Tuncay, and R. Yilmaz, “Exchange of experience the effect of synthesis time on the wear behavior of Al–8%Ti alloy produced by mechanical alloying,” Powder Metall. Met. Ceramics, 51, Nos. 7–8, 481–495 (2012).