journal article·2007-05

Temperature effect on bending strength of hot-pressed boron carbide materials

Yu. G. Tkachenko, D. Z. Yurchenko, V. K. Sul’zhenko, G. S. Oleinik, V. M. Vereshchaka

Powder Metallurgy and Metal Ceramics· Volume 46· Issue 5-6
Publisher page

Abstract

The paper examines three groups of samples based on B4C and B13C2 powders (with additions of Al and Al2O3 in the amount of 2 and 5 wt.%, respectively). It is established that the maximal strength (445 MPa) is characteristic of the material B13C2 over the whole temperature range. It does not change up to 1600°C. The increase in strength of B4C-based samples is revealed over the range of 1200 to 1600°C, mainly for high-porous materials (10–12%). Presumably, this is due to the higher relaxation properties of porous material microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Boron and Carbon Nanomaterials Research · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. O. N. Grigor’ev, Yu. G. Tkachenko, V. V. Koval’chuk, et al., “Structure, strength, and wear resistance of materials of the B4C-Al2O3 system,” Powder Metall. Met. Ceram., 28, No. 6, 498–503 (1989).10.1007/BF00795310 ↗
2. A. D. Osipov, I. T. Ostapenko, V. V. Slezov, et al., “Effect of porosity and grain size on the mechanical properties of hot-pressed boron carbide,” Powder Metall. Met. Ceram., 21, No. 1, 55–58 (1982).10.1007/BF00791728 ↗
3. S. Torquato, C. L. Y. Yeong, M. D. Rintoul, et al., “Elastic properties and structure of interpenetrating boron carbide/aluminum multiphase composites,” J. Am. Ceram. Soc., 82, No. 5, 1263–1268 (1999).10.1111/j.1151-2916.1999.tb01905.x ↗
4. G. De With, “High temperature fracture of boron carbide: experiments and simple theoretical models”. J. Mater. Sci., 19, No. 2, 457–466 (1984).10.1007/BF02403232 ↗
5. K. Niihara, “Mechanical properties of chemically vapor deposits nonoxide ceramics,” Am. Ceram. Soc. Bull., 63, No. 9, 1160–1164 (1984).
6. R. J. Stokes, “Microscopic aspects of fracture in ceramics,” in: H. Liebowitz (ed.), Fracture. An Advanced Treatise, Vol. 7, Academic Press, New York (1972), pp. 157–241.
7. V. K. Sul’zhenko, M. A. Kuzenkova, and G. S. Oleinik, “Temperature effect on the strength of aluminum nitride,” in: High-Temperature Nitrides and Their Derivative Materials, Inst. Probl. Materialoved. AN USSR, Kiev (1985), pp. 80–85.
8. G. De With, “Note on the temperature dependence of the hardness of boron carbide,” J. Less. Common Met., 95, 133–138 (1983).10.1016/0022-5088(83)90392-2 ↗
9. R. W. Rice, “Effects of thermal expansion mismatch stresses on the room-temperature fracture of boron carbide,” J. Am. Ceram. Soc., 73, No. 10, 3116–3118 (1990).10.1111/j.1151-2916.1990.tb06731.x ↗
10. S. Prochazka, S. L. Dole, and C. I. Hejna, “Abnormal grain growth and microcracking in boron carbide,” J. Am. Ceram. Soc., 68, No. 9, 235–236 (1985).10.1111/j.1151-2916.1985.tb15796.x ↗
11. H. Lee and R. F. Speyer, “Hardness and fracture toughness of pressureless-sintered boron carbide, ” J. Am. Ceram. Soc., 85, No. 5, 1291–1293 (2002).10.1111/j.1151-2916.2002.tb00260.x ↗
12. D. R. Mackinnen, T. Aselage, and S. B. Van Deusen, “High resolution imaging of B4C and B12C2 microstructures,” Int. Conf. Boron-rich Solids (Albuquerque, New Mexico, July 29–August 3, 1985), N.J. (1986), pp. 114–120.
13. A. G. Evans and T. G. Langdon, Structural Ceramics, Pergamon Press, Oxford (1976).
14. B. Ram, “Method for producing ceramic articles of increased fracture toughness,” USA Patent 4707312, Publ. November 17 (1987).
15. Y. Kazuo, M. Masahito, and M. Masashi, J. Ceram. Soc. Jap., 106, No. 1240, 1178–1183 (1998).10.2109/jcersj.106.1178 ↗
16. C. H. Lee and C. H. Kim, “Pressureless sintering and related reaction phenomena of Al2O3-doped B4C,” J. Mater. Sci., 27, 6335–6340 (1992).10.1007/BF00576282 ↗
17. J. Liu and P. D. Ownby, “Boron carbide reinforced alumina composites,” J. Ceram. Soc., 74, No. 3, 674–677 (1991).10.1111/j.1151-2916.1991.tb04081.x ↗
18. D. C. Halverson, A. J. Pyzik, I. A. Aksay, and W. E. Showden, “Processing of boron carbide-aluminum composites,” J. Ceram. Soc., 72, 775 (1989).10.1111/j.1151-2916.1989.tb06216.x ↗