Investigation of the Electroless Nickel Plated Sic Particles in Sac305 Solder Matrix
Source abstract
Abstract
In the present study, an electroless nickel (EN) plating method is applied for the coating of silicon carbide (SiC) particles. The particles of SiC(Ni) were added to the Sn–3.0Ag–0.5Cu matrix for the production of SAC305/SiC(Ni) composite by the powder metallurgy route. SAC305/xSi(Ni) composite was prepared by a planetary ball milling of the starting powder, followed by compacting and sintering. Nickel-coated silicon carbide particles and the lead-free solder matrix react together, forming different phases during sintering at temperature 200°C for 3 h. The microstructure, mechanical (compressive strength, microhardness, wettability, and porosity) and physical properties (density) of lead-free solder composite SAC305/SiC(Ni) were studied. The current research shows the successful application of electroless nickel (EN) plating method, and how nickel-coated SiC particles subsequently improve the mechanical properties and microstructure of lead-free solder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Z.P. Yang and W. Zhou, “Effects of Ni-coated carbon nanotubes addition on the electromigration of Sn–Ag–Cu solder joints,” J. Alloys Compd., 581,202–205 (2013).10.1016/j.jallcom.2013.07.058 ↗
2. Z. Yang, W. Zhou, and P. Wu, “Effects of Ni-coated carbon nanotubes addition on the micro-structure and mechanical properties of Sn–Ag–Cu solder alloys,” Mater. Sci. Eng. A., 590, 295–300 (2014).10.1016/j.msea.2013.10.008 ↗
3. X.D. Liu, Y.D. Han, H.Y. Jing, J. Wei, and L.Y. Xu, “Effect of graphene nanosheets reinforcement on the performance of Sn–Ag–Cu lead-free solder,” Mater. Sci. Eng. A., 562, 25–32 (2013).10.1016/j.msea.2012.10.079 ↗
4. L. Gao, S. Xue, L. Zhang, Z. Sheng, F. Ji, W. Dai, S.L. Yu, and G. Zeng, “Effect of alloying elements on properties and micro-structures of SnAgCu solders,” Microelectron. Eng., 87, 2025–2034 (2010).10.1016/j.mee.2010.04.007 ↗
5. A.A. El-Daly, A. Fawzy, S.F. Mansour, and M.J. Younis, “Novel SiC nanoparticles-containing Sn–1.0Ag–0.5Cu solder with good drop impact performance,“ Mater. Sci. Eng. A., 578, 62–71 (2013).
6. A.A. El-Daly, G.S. Al-Ganainy, A. Fawzy, and M.J. Younis, “Structural characterization and creep resistance of nano-silicon carbide reinforced Sn–1.0Ag–0.5Cu lead-free solder alloy,” Mater. Des., 55, 837–845 (2014).10.1016/j.matdes.2013.10.043 ↗
7. K.M. Kumar, V. Kripesh, and A.A.O. Tay, “Single-wall carbon nanotube (SWCNT) functionalized Sn–Ag–Cu lead-free composite solders,” J. Alloys Compd., 450, 229–237 (2008).10.1016/j.jallcom.2006.10.123 ↗
8. X. Hu, Y.C. Chan, K. Zhang, and K.C. Yung, “Effect of graphene doping on microstructural and mechanical properties of Sn–8Zn–3Bi solder joints together with electromigration analysis,” J. Alloys Compd., 580, 162–171 (2013).10.1016/j.jallcom.2013.05.124 ↗
9. J. Liu, C. Andersson, Y. Gao, and Q. Zhai, “Recent development of nano-solder paste for electronics interconnect applications johan,”in: 10th Electronics Packaging Technology Conference (Singapore, 9–12 December, 2008), IEEE (2008), pp. 84–93.
10. A.A. El-Daly, W.M. Desoky, T.A. Elmosalami, M.G. El-Shaarawy, and A.M. Abdraboh, “Microstructural modifications and properties of SiC nanoparticles-reinforced Sn–3.0Ag–0.5Cu solder alloy,” Mater. Des.65, 1196–1204 (2015).10.1016/j.matdes.2014.08.058 ↗
11. G. Chen, F. Wu, C. Liu, V.V. Silberschmidt, and Y.C. Chan, “Micro-structures and properties of new Sn–Ag– Cu lead-free solder reinforced with Ni-coated graphene nanosheets,” J. Alloys Compd., 656, 500–509 (2016).10.1016/j.jallcom.2015.09.178 ↗
12. O. Mokhtari, A. Roshanghias, R. Ashayer, H.R. Kotadia, F. Khomamizadeh, A.H. Kokabi, M.P. Clode, M. Miodownik, and S.H. Mannan, “Disabling of nanoparticle effects at increased temperature in nanocomposite solders,” J. Electron. Mater., 41,1907–1914 (2012).10.1007/s11664-012-1976-y ↗
13. I. Yahya, N. Asikin, A. Ghani, M. Arif, A. Mohd, “Intermetallic evolution between Sn–3.5Ag–1.0Cu–xZn lead free solder and copper substrate under long time thermal aging (x: 0, 0.1, 0.4, 0.7),” in: 35th IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT) (Ipoh, Malaysia, 6–8 November, 2012), IEEE (2012), pp. 1–6.
14. X. Wang, Y.C. Liu, C. Wei, H.X. Gao, P. Jiang, and L.M. Yu, “Strengthening mechanism of SiCparticulate reinforced Sn–3.7Ag–0.9Zn lead-free solder,” J. Alloys Compd., 480, 662–665 (2009).10.1016/j.jallcom.2009.02.002 ↗
15. A.A. El-Daly and A.M. El-Taher, “Improved strength of Ni and Zn–doped Sn–2.0Ag–0.5Cu lead-free solder alloys under controlled processing parameters,” Mater. Des., 47, 607–614 (2013).10.1016/j.matdes.2012.12.081 ↗
16. A. Kumar, Y.C. Chan, and W.K.C. Yung, “Effect of nano Ni additions on the structure and properties of Sn–9Zn and Sn–Zn–3Bi solders in Au/Ni/Cu ball grid array packages,” Mater. Sci. Eng. B., 162, 92–98 (2009).10.1016/j.mseb.2009.03.010 ↗
17. A.A. El-Daly, A.E. Hammad, A. Fawzy, and D.A. Nasrallh, “Micro-structure, mechanical properties and deformation behavior of Sn–1.0Ag–0.5Cu solder after Ni and Sb additions,” J. Mater., 43, 40–49 (2013).10.1016/j.matdes.2012.06.058 ↗
18. M.R. Vaezi, S.K. Sadrnezhaad, and L. Nikzad, “Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics,” Coll. Surf. A., 315, 176–182 (2008).10.1016/j.colsurfa.2007.07.027 ↗
19. E.A. Pavlatou, M. Stroumbouli, P. Gyftou, and N. Spyrellis, “Hardening effect induced by incorporation of SiC particles in Ni electrodeposits,” J. Appl. Electrochem., 36, 385–394 (2006).10.1007/s10800-005-9082-y ↗
20. A.F. Zimmerman, G. Palumbo, K.T. Aust, and U. Erb, “Mechanical properties of nickel silicon carbide nanocomposites,” Mater. Sci. Eng. A., 328, 137–146 (2002).10.1016/S0921-5093(01)01692-6 ↗
21. Zaki Ahmad, Coatings. Principles of Corrosion Engineering and Corrosion Control, Elsevier (2006), pp. 382–487, https://doi.org/10.1016/B978-075065924-6/50008-8.10.1016/B978-075065924-6/50008-8 ↗
22. Z. Fathian, A. Maleki, and B. Niroumand, “Niroumand Synthesis and characterization of ceramic nanoparticles reinforced lead-free solder,” Ceram. Int., 43, 5302–5310 (2017).10.1016/j.ceramint.2017.01.067 ↗
23. S. Nai, J. Wei, M. Gupta, “Improving the performance of lead-free solder reinforced with multi-walled carbon nanotubes,” Mater. Sci. Eng. A., 423, 166–169 (2006).10.1016/j.msea.2005.10.072 ↗
24. X.L. Zhong, M. Gupta, “Development of lead–free Sn–0.7Cu/Al2O3 nanocomposite solders with superior strength,” J. Physics D: Applied Physics,41, 1–7 (2008).
25. L. Zhang and K.N. Tu, “Structure and properties of lead-free solders bearing micro and nano particles,” Mater. Sci. Eng. R., 82, 1–32 (2014).10.1016/j.mser.2014.06.001 ↗
26. M. Hasegawa, K. Sugawara, R. Suto, S. Sambonsuge, Y. Teraoka, A. Yoshigoe, S. Filimonov, H. Fukidome, and M. Suemitsu, “In situ SR-XPS observation of Ni-assisted low-temperature formation of epitaxial graphene on 3C-SiC/Si,” Nanoscale Research Lett., 10, 421–426 (2015).10.1186/s11671-015-1131-9 ↗
27. R.M. Said, M.A.A. Mohd Salleh, M.I.I. Ramli, and N. Saud, “Effect of silicon (Si) particles addition on melting temperature, intermetallic compound formation and solderability of Sn–Cu–Ni composite solder paste,” in: Advanced Materials Engineering and Technology V: International Conference on Advanced Material Engineering and Technology (Kaohsiung, Taiwan, 8–9 December, 2016), AIP Conference Proceedings, 1835, No. 1, 020028 (2016).
28. K.N. Tu and K. Zeng, “Tin ± lead (SnPb) solder reaction in flip chip technology,” Mater. Sci. Eng. R., 34, 1–58 (2001).10.1016/S0927-796X(01)00029-8 ↗