Strain hardening of a powder body in pressing
Source abstract
Abstract
The compaction of powders in a press mold is analyzed using the theory of plasticity for porous and powder bodies and a rheological model that includes elastic, viscous, and plastically hardenable elements of the matrix forming a porous deformable body. In cold-pressing conditions, plasticity is the main factor influencing the behavior of the porous body under external pressure. The shear yield stress of the matrix versus its mean-square-root strain is calculated. It is shown that the dependence of the mean relative density of a compactable body on the applied pressure is determined by the variation in the shear yield stress of the matrix due to strain hardening for metal bodies and due to the brittle fracture of particles along with strain hardening during compaction for non-metal powders. An analysis of data on powder compaction under continuous pressure increase by calculating the above dependences shows features of matrix strain hardening and their effect on powder compaction in a press mold.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. R. M. German, Particle Packing Characteristics, Metal Powder Industries Federation, Princeton (1989), p. 443.
2. I. F. Martynova, “Physical features of plastic deformation of porous bodies,” in: Rheological Models and Deformation of Porous Powder and Composite Materials [in Russian], Naukova Dumka, Kiev (1985), pp. 98–105.
3. I. Pokorska, “Experimental identification of yield stress for sintered materials,” Powder Metall. Met. Ceram., 47, No. 7–8, 393–397 (2008).10.1007/s11106-008-9032-4 ↗
4. E. M. Borisovskaya, V. A. Nazarenko, Yu. N. Podrezov, et al., “Mechanical properties of powder titanium at different production stages,” I. Densification curves for titanium powder billets,” Powder Metall. Met. Ceram., 47, No. 7–8, 406–413 (2008).10.1007/s11106-008-9035-1 ↗
5. R. J. Green, “Plasticity theory for porous solids,” Int. J. Mech. Sci., 14, 215–224 (1972).10.1016/0020-7403(72)90063-X ↗
6. S. Shima and M. Oyano, “Plasticity theory for porous metals,” Int. J. Mech. Sci., 18, No. 6, 285–291 (1976).10.1016/0020-7403(76)90030-8 ↗
7. I. F. Martynova and M. B. Shtern, “An equation for the plasticity of a porous solid allowing for true strains of the matrix material,” Powder Metall. Met. Ceram., 17, No. 1, 17–21 (1978).10.1007/BF00795131 ↗
8. A. M. Laptev, “Plasticity criteria for porous metals,” Powder Metall. Met. Ceram., 21, No. 7, 522–526 (1982).10.1007/BF00802566 ↗
9. M. B. Shtern, “Plasticity theory of porous bodies and compactable powders revisited,” in: Rheological Models and Deformation of Porous Powder and Composite Materials [in Russian], Naukova Dumka, Kiev (1985), pp. 12–23.
10. B. A. Druyanov, Applied Plasticity Theory for Porous Bodies [in Russian], Mashinostroenie, Moscow (1989), p. 168.
11. R. Hill, The Mathematical Theory of Plasticity, Oxford University Press, London (1950).
12. J. P. Hirth and J. Lothe, Theory of Dislocations, McGraw-Hill, New York (1968).
13. G. V. Stepanov, Elastoplastic Deformation and Failure of Materials under Impulsive Loading [in Russian], Naukova Dumka, Kiev (1991), p. 288.
14. H. Lamb, Hydrodynamics, Cambridge University Press, Cambridge (1932).
15. L. D. Landau and E. M. Lifshits, Theory of Elasticity, Pergamon Press, New York (1986).
16. V. V. Skorokhod, Rheological Basis of Sintering Theory [in Russian], Naukova Dumka, Kiev (1968), p. 152.
17. V. D. Rud’ and V. Z. Midukov, “Experimental verification of plasticity hypotheses for porous solids,” Powder Metall. Met. Ceram., 21, No. 1, 18–28 (1982).10.1007/BF00791718 ↗
18. J. F. Nye, Physical Properties of Crystals: Their Representation by Tensors and Matrices, Oxford University Press, Oxford (1957).
19. M. B. Shtern, “A model of deformation processes of compressible materials with pore formation taken into account. I. Determining equations and loading surface,” Powder Metall. Met. Ceram., 28, No. 5, 359–364 (1989).10.1007/BF00795037 ↗
20. M. B. Shtern, “A model of the processes of deformation of compressible materials with an allowance made for pore formation. II. Uniaxial tension and compression of porous bodies,” Powder Metall. Met. Ceram., 28, No. 6, 446–451 (1989).10.1007/BF00795298 ↗
21. M. S. Koval’chenko, “Elasticity and viscosity of isotropic porous materials,” Powder Metall. Met. Ceram., 42, No. 1–2, 81–87 (2003).10.1023/A:1023955418754 ↗
22. R. P. Feynman, R. B. Leighton, and M. Sands, Continuum Physics, Vol. 7 of the series The Feynman Lectures on Physics [Russian translation], Mir, Moscow (1966), p. 290.
23. M. S. Koval’chenko, “A rheological model of pressing of powders,” Powder Metall. Met. Ceram., 29, No. 9, 753–756 (1990).10.1007/BF00795589 ↗
24. R. W. K. Honeycomb, The Plastic Deformation of Metals, Edward Arnold, London (1984).
25. A. Cottrell, The Mechanical Properties of Matter, J. Willey, New York–London–Sydney (1964), p. 430.
26. M. S. Koval’chenko, “Dynamics of uniaxial tension of a viscoelastic strain-hardening body in a system with one degree of freedom. Part 1. Prescribed motion,” Strength of Materials, 30, No. 4, 364–373 (1998).10.1007/BF02524710 ↗
27. A. G. Kostornov, Materials Science of Fine and Porous Metals and Alloys [in Russian], Vol. 1, Naukova Dumka, Kiev (2002), p. 572.
28. A. F. Zhornyak and V. E. Oliker, “Pressing behavior of atomized iron powders,” Powder Metall. Met. Ceram., 20, No. 2, 99–104, No. 3, 182–186, No. 5, 323–328 (1981).10.1007/BF00791445 ↗
29. N. F. Kunin and B. D. Yurchenko, “The work of compaction of metal powders,” Powder Metall. Met. Ceram., 3, No. 6, 443–450 (1964).10.1007/BF01194579 ↗