journal article·2000-09

Processing, Microstructure, and Mechanical Properties of B4C ― TiB2 Particulate Sintered Composites. Part II. Fracture and Mechanical Properties

Vladislav V. Skorokhod

Powder Metallurgy and Metal Ceramics· Volume 39· Issue 9-10
Publisher page

Abstract

The fracture response of pressureless sintered boron carbide ceramics containing 5-25 vol.% TiB2 phase produced via the in-situ chemical reaction between B4C, TiO2 and elemental carbon was studied. Both strength and fracture toughness depend on TiB2 volume fraction, reaching their maximum values of 500 MPa and 4.6 MPa·m1/2, respectively, at 15 vol.% TiB2. The observed increase in strength and fracture toughness was ascribed to the interaction between the propagating crack front and local thermal mismatch stress associated with TiB2 particles. Induced circumferencial microcracking and crack impedance are discussed as the major toughening mechanisms. Spontaneous circumferencial microcracking due to thermal mismatch stress in TiB2 particles was found to occur when the particle size exceeds its critical value. The theoretical interpretation of spontaneous circumferencial microcracking, toughening via induced microcracking, and crack impedance was justified experimentally.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. K. Niihara, A. Nakahira, and T. Hirai, “The effect of stoichiometry on mechanical properties of boron carbide,” J.Amer.Ceram.Soc., 67, C13-C14 (1984).10.1111/j.1151-2916.1984.tb19158.x ↗
2. F. Thevenot, “Boron carbide: Comprehensive review,” J.Eur.Ceram.Soc., 6, 205-225 (1990).10.1016/0955-2219(90)90048-K ↗
3. H. Hoffmann and G. Petzow, “Structure and properties of reaction HIP B4C — TiB2 — W2B5 materials,” J.Less Common Met., 117, 121-127 (1986).10.1016/0022-5088(86)90020-2 ↗
4. D.K. Kim and C.H. Kim, “Pressureless sintering and microstructural development of B4C — TiB2 composites,” Adv.Ceram.Mater., 3, 52-55 (1988).10.1111/j.1551-2916.1988.tb00169.x ↗
5. L.S. Sigl and H.J. Kleebe, “Microcracking in B4C — TiB2 composites,” J.Amer.Ceram.Soc., 78, 2374-2380 (1955).10.1111/j.1151-2916.1995.tb08671.x ↗
6. S. Dole, S. Prochazka, and R.H. Doremus, “Microstructural coarsening during sintering of boron carbide,” J.Amer.Ceram.Soc., 72, 958-966 (1989).10.1111/j.1151-2916.1989.tb06252.x ↗
7. V. Skorokhod, M.D. Vlajic, and V.D. Krstic, “Mechanical properties of pressureless sintered boron carbide containing TiB2 phase,” J.Mater.Sci.Lett., 15, 1337-1339 (1996).10.1007/BF00240800 ↗
8. V. Skorokhod, M.D. Vlajic, and V.D. Krstic, “Pressureless sintering of B4C — TiB2 ceramic composites,” in: Proceeding of the Second Yugoslav Conference on Advanced Materials (Herceg-Novi, Yugoslavia, September 15-19, 1997), Trans.Tech.Publications, Switzerland; Germany (1998), pp.219-224.
9. Vl.V. Skorokhod and V.D. Krstic, “Processing, microstructure and mechanical properties of B4C — TiB2 particulate sintered composites.I.Pressureless sintering and microstructure evolution,” Poroshk.Metall., Nos.7-8, 111-121 (2000).
10. J. Selsing, “Internal stresses in ceramics,” J.Amer.Ceram.Soc., 44, 419 (1961).10.1111/j.1151-2916.1961.tb15475.x ↗
11. D.L. Weyl, “Influence of internal strains on the texture and mechanical strength of porcelains,” Ber.Deut.Keram.Ges., 36, 319-324 (1959).
12. D.P.H. Hasselman and R.M. Fulrath, “Micromechanical phase concentration in two-phase brittle matrix ceramic composites,” J.Amer.Ceram.Soc., 50, 399-404 (1967).10.1111/j.1151-2916.1967.tb15143.x ↗
13. R.G. Hoagland, A.R. Rosenfield, and G.T. Hahn, “Mechanisms of fast fracture and arrest in steels,” Metal.Trans., 3, 123-135 (1972).10.1007/BF02680591 ↗
14. A.K. Khaund, V.D. Krstic, and P.S. Nicholson, “Influence of elastic and thermal mismatch on the local crackdriving force in brittle composites,” J.Mater.Sci., 12, 2269-2273 (1977).10.1007/BF00552248 ↗
15. R.W. Rice and R.C. Pohanka, “Grain size dependence of spontaneous cracking in ceramics,” J.Amer.Ceram.Soc., 62, 559-563 (1979).10.1111/j.1151-2916.1979.tb12730.x ↗
16. R.W. Davidge and T.J. Green, “The strength of two-phase ceramics/glass materials,” J.Mater.Sci., 3, 629-634 (1968).10.1007/BF00757910 ↗
17. R.C. Rossi, “Thermal expansion of BeO — SiC composites,” J.Amer.Ceram.Soc., 52, 290-291 (1969).10.1111/j.1151-2916.1969.tb09189.x ↗
18. J.J. Cleveland and R.C. Bradt, “Grain size/microcracking relations for pseudobrookite oxides,” J.Amer.Ceram.Soc., 61, 478-481 (1978).10.1111/j.1151-2916.1978.tb16121.x ↗
19. R.C. Pohanka, S.W. Freiman, and B.A. Bender, “Effect of the phase transformation on the fracture behaviour of BaTiO3,” J.Amer.Ceram.Soc., 61, 72-75 (1978).10.1111/j.1151-2916.1978.tb09234.x ↗
20. R.W. Rice, S.W. Freiman, and J.J. Mechlosky, “Dependence of strength-controlling fracture energy on the flaw size to grain size ratio,” J.Amer.Ceram.Soc., 63, 129-136 (1980).10.1111/j.1151-2916.1980.tb10676.x ↗
21. V.D. Krstic and M.D. Vlajic, “Conditions for spontaneous cracking of a brittle matrix due to the presence of thermoelastic stresses,” Acta Metall., 31, 139-144 (1983).10.1016/0001-6160(83)90073-1 ↗
22. V.D. Krstic, M. Komac, and M.D. Vlajic, “Crack extension and arrest within the particle subjected to tensile thermoelastic stress,” J.Mater.Sci., 19, 4119-4124 (1984).10.1007/BF00980779 ↗
23. V.D. Krstic, “Grain-size dependence of fracture stress in anisotropic brittle solids,” J.Mater.Sci., 23, 259-266 (1988).10.1007/BF01174063 ↗
24. R.C. Gessing and R.C. Bradt, “A microcracking model for the effect of grain size on slow crack growth in polycrystalline Al2O3,” in: R.C. Bradt (ed.), “Fracture Mechanics of Ceramics,” Vol.5, Plenum Press, New York (1973), p.569.
25. A.G. Evans, “Toughening of ceramics by circumferencial microcracking,” J.Amer.Ceram.Soc., 64, 394-398 (1981).10.1111/j.1151-2916.1981.tb09877.x ↗
26. D. Munz, R.T. Bubsey, and J.L. Shannon, “Fracture toughness determination using four-point bend specimens with straight-through and chevron notches,” J.Amer.Ceram.Soc., 63, 300-305 (1980).10.1111/j.1151-2916.1980.tb10725.x ↗
27. A.A. Griffith, “Phenomena of rupture and flow in solids,” Phil.Trans.Roy.Soc.London, A 221, 163-198 (1920).
28. I.N. Sneddon, “The distribution of stress in the neighbourhood of a crack in an elastic solid,” Proc.Royal.Soc.London, A 187, 229-260 (1946).
29. R.A. Sack, “Extension of Griffith's theory of rupture to three dimensions,” Proc.Phys.Soc.London, A 58, 729-736 (1946).10.1088/0959-5309/58/6/312 ↗
30. R.L. Fullman, “Measurements of particle sizes in opaque bodies,” J.Met., 15, 447-452 (1953).