journal article·2016-03

Improving Structure, Properties, and Abrasive Wear Resistance of the Thermally Sprayed Co-Based Coating by Means of La2O3 Addition

S. Sharma, R. K. Pandey, R. K. Mishra, A. Dixit

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 11-12
Publisher page

Abstract

Co-based alloy modified with La2O3 is deposited by high velocity oxy-fuel (HVOF) spraying rocess. The microstructure, porosity, hardness, and abrasive wear of the coatings are investigated. The La2O3 addition refines the microstructure, forms new phases, and increases hardness and abrasive wear resistance of the modified coating. The abrasive wear behavior of these coatings is investigated under normal loads 5 and 15 N against 220 abrasive grit size. The abrasive wear is carried out using 30 and 50 m/min sliding rates. The abrasive wear is found to increase with the increase in normal load and sliding rates. Analysis of the worn surfaces by scanning electron microscope images revealed cutting and plowing as the material removal mechanisms in these coatings under abrasive wear conditions used in this research.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. T. Burakowski and T. Wierzchon, Surface Engineering of Metals: Principle, Equipment, and Technology, CRC Press, Boca Raton, USA (1998), p. 608.10.1201/9780367802325 ↗
2. J. K. N. Murthy and B. Venkataraman, “Abrasive wear behavior of WC–CoCr and Cr3C2–20(NiCr) deposited by HVOF and detonation spray processes,” Surf. Coat. Technol., 200, No. 8, 2642–2652 (2006).10.1016/j.surfcoat.2004.10.136 ↗
3. T. Sudaprasert, P. H. Shipway, and D. G. McCartney, “Sliding wear behavior of HVOF sprayed WC–Co coatings deposited with both gas-fuelled and liquid-fuelled systems,” Wear, 255, 943–949 (2003).10.1016/S0043-1648(03)00293-X ↗
4. D. A. Stewart, P. H. Shipway, and D. G. McCartney, “Abrasive wear behavior of conventional and nanocomposite HVOF-sprayed WC–Co coatings,” Wear, 225, 789–98 (1999).10.1016/S0043-1648(99)00032-0 ↗
5. B. M. Dhakar, D. K. Dwivedi, and S. Sharma, “Studies on re-melting of tungsten carbide and rare earth (RE) modified Nickel base alloy composite coating,” Surf. Eng., 28(1), 73–80 (2012).10.1179/1743294411Y.0000000051 ↗
6. D. W. Wheeler and R. J. K. Wood, “Erosion of hard surface coatings for use in offshore gate valves,” Wear, 258, 526–536 (2005).10.1016/j.wear.2004.03.035 ↗
7. S. Sharma, “Erosive wear study of rare earth modified HVOF sprayed coatings using design of experiment,” J. Therm. Spray Technol., 21(1), 49–62 (2012).10.1007/s11666-011-9688-z ↗
8. B. Q. Wang and Z. R. Shui, “Hot erosion behavior of carbide–metal composite coatings,” J. Mat. Pro. Technol., 143, 87–92 (2003).10.1016/S0924-0136(03)00326-1 ↗
9. S. Harsha, D. K. Dwivedi, and A. Agrawal, “Influence of WC addition in Co–Cr–W–Ni–C flame sprayed coatings on microstructure, micro hardness and wear behavior,” Surf. Coat. Technol., 201, 5766–5775(2007).10.1016/j.surfcoat.2006.10.026 ↗
10. V. M. Desai, C. M. Rao, T. H. Kosel, and N. F. Fiore, “Effect of carbide size on the abrasion of cobalt-base powder metallurgy alloys,” Wear, 94, 89–101 (1984).10.1016/0043-1648(84)90168-6 ↗
11. K. L. Wang, Q. B. Zhang, M. L. Sun, et al., “Microstructure and corrosion resistance of laser clad coatings with rare earth elements,” Cor. Sci., 43, 255–267 (2001).10.1016/S0010-938X(00)00081-0 ↗
12. X. H. Wang, M. Zhang, Z. D. Zhou, and S. Y. Qu, “Microstructure and properties of laser clad TiC+NiCrBSi+rare earth composite coatings,” Surf. Coat. Technol., 161, 195–199 (2002).10.1016/S0257-8972(02)00496-6 ↗
13. G. M. Zhao and K. L. Wang “Effect of La2O3 on corrosion resistance of laser clad ferrite-based alloy coatings,” Cor. Sci., 48, 273–284 (2006).10.1016/j.corsci.2005.01.002 ↗
14. Z. Zhang, Z. Wang, and B. Liang, “Effect of CeO2 on microstructure and bond strength of Fe–Ni–Cr alloy,” J. Rare Earths, 23, 73–76 (2000).
15. Z. Zhang, X. Lu, B. Han, and J. Luo, “Rare earth effect on the microstructure and wear resistance of Nibased coatings,” Mater. Sci. Eng. A, 454–455, 194–202 (2007).10.1016/j.msea.2006.11.034 ↗
16. Z. Zhang, Z. Wang, B. Liang, et al., “Effect of CeO2 on the microstructure and wear behavior of thermal spray welded NiCrWRE coatings,” Wear, 262, 562–567 (2007).10.1016/j.wear.2006.07.002 ↗
17. Z. Zhang, Z. Wang, B. Liang and P. La, “Effects of CeO2 on friction and wear characteristics of Fe–Ni–Cr alloy coatings,” Tribol. Int., 39, 971–978 (2006).10.1016/j.triboint.2005.08.003 ↗
18. S. Sharma, D. K. Dwivedi, and P. K. Jain, “Effect of CeO2 addition on the microstructure, hardness, and abrasive wear behavior of flame-sprayed Ni-based Coatings,” J. Engin. Tribol., 222, 925–933 (2008).
19. S. Sharma, D. K. Dwivedi, and P. K. Jain, “Effect of La2O3 addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatings,” Wear, 267, 853–59 (2009).10.1016/j.wear.2008.12.029 ↗
20. M. Li, S. Zhang, H. Li, et al., “Effect of nano-CeO2 on cobalt-based alloy laser coatings,” J. Mater. Process. Technol., 202, 107–111 (2008).10.1016/j.jmatprotec.2007.08.050 ↗
21. Z. Zhenyu, L. Xinchun, H. Baolei, and L. Jianbin, “Rare earth effect on microstructure, mechanical and tribological properties of CoCrW coatings,” Mater. Sci. Eng. A, 444, 92–98 (2007).10.1016/j.msea.2006.08.091 ↗
22. Kim Hyung-Jun, Yoon Byoung-Hyun, Lee Chang-Hee.,“Sliding wear performance in molten Zn–Al bath of cobalt-based overlays produced by plasma-transferred arc weld-surfacing,” Wear, 254, 408–14 (2003).10.1016/S0043-1648(03)00186-8 ↗
23. ASTM standards E 2109–01. Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings (Reapproved 2007).
24. ASTM standards E 562–05e1. Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count.
25. H. R. Shetty, T. H. Kosel, and N. F. Fiore, “A study of abrasive wear mechanisms using diamond and alumina scratch tests,” Wear, 80, 347–76 (1982).10.1016/0043-1648(82)90262-9 ↗
26. Z. Limin, S. Dongbai, and Y. Hongying, “Characteristics of plasma cladding Fe-based alloy coatings with rare earth metal elements,” Mater. Sci. Eng. A, 452, 619–24 (2007).
27. L. Gil and M. H. Staia, “Microstructure and properties of HVOF thermal sprayed NiWCrBSi coatings,” Surf. Coat. Technol., 120, 423–29 (1999).10.1016/S0257-8972(99)00494-6 ↗
28. M. Li, Y. He, and G. Sun, “Microstructure and wear resistance of laser clad cobalt-based alloy multi-layer coatings,” Appl. Surf. Sci., 230, 201–206 (2004).10.1016/j.apsusc.2004.02.030 ↗
29. P. Wu, C. Z. Zhou, X. N. Tang, “Laser alloying of a gradient metal–ceramic layer to enhance the wear properties,” Surf. Coat. Technol., 73, 111–114 (1995).10.1016/0257-8972(94)02369-7 ↗
30. M. Corchia, P. Delogu, and F. Nenci, “Microstructural aspects of wear-resistant stellite and colmonoy coatings by laser processing,” Wear, 119, 137–152 (1987).10.1016/0043-1648(87)90105-0 ↗
31. K. L. Wang, Q. B. Zhang, M. L. Sun, and Y. M. Zhu, “Rare earth elements modification of laser clad of nickel based alloy coatings,” Appl. Surf. Sci., 174, 191–200 (2001).10.1016/S0169-4332(01)00017-4 ↗
32. Z. Zhang, X. Lu, and J. Luo, “Tribological properties of rare earth oxide added Cr3C2–NiCr coatings,” Appl. Surf. Sci., 253, 4377–4385 (2007).10.1016/j.apsusc.2006.09.040 ↗
33. A. Frenk and W. Kurz, “Microstructural effects on the sliding wear resistance of a cobalt based alloy,” Wear, 174, 81–91 (1994).10.1016/0043-1648(94)90089-2 ↗
34. M. Vite, M. Castillo, L. H. Hernandez, et al., “Dry and wet abrasive resistance of Inconel 600 and stellite,” Wear, 258, 70–76 (2005).10.1016/j.wear.2003.12.018 ↗
35. J. L. de Mol van Otterloo and J. Th. M. De Hosson, “Microstructural features and mechanical properties of a cobalt-based laser coating,” Acta Mater., 45, 1225–1236 (1997).10.1016/S1359-6454(96)00250-9 ↗