journal article·2011-07

Effect of carbon content on the properties of sintered steels doped with manganese and copper

G. A. Baglyuk, L. A. Sosnovskii, V. I. Volfman

Powder Metallurgy and Metal Ceramics· Volume 50· Issue 3-4
Publisher page

Abstract

The properties of sintered steels doped with manganese and copper and produced using copper- bearing ferromanganese master alloys are examined with respect to temperature and concentrations of the master alloy (3–10%) and graphite (0–1.0%) in the charge. It is shown that increase in the concentration of the master alloy and graphite leads to the relevant increase in steel strength. The hardness of steel with the minimum content of the master alloy (3%) becomes substantially higher when carbon is introduced and weakly depends on sintering temperature. If the concentration of the master alloy is higher (7 and 10%), the effect of sintering temperature on hardness noticeably increases, while the effect of graphite content substantially decreases. With increasing concentration of the master alloy, the hardness of the sintered steel becomes higher regardless of sintering temperature and graphite content of the charge.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. A. Šalak, “High-strength sintered manganese steel,” Mod. Dev. Powder. Metall., 13, 183–201 (1981).
2. E. Dudrova and M. Kabatova, “Microstructure, mechanical properties and fracture behavior of manganese sintered steels,” in: Proc. Int. Conf. Deformation and Fracture in Structural PM Materials (DF PM-2002), Vol. 1, Stará Lesná, Slovakia (2002), pp. 107–115.
3. E. Dudrova, M. Kabatova, R. Bidulsky, et al., “Industrial processing, microstructure and mechanical properties of Fe–(2–4) Mn–(0.85) Mo–(0.3–0.7) C sintered steels,” Powder Metall., 47, No. 2, 181–190 (2004).10.1179/003258904225015518 ↗
4. S. G. Napara-Volgina, V. A. Maslyuk, and L. N. Orlova, “Economically Alloyed Manganese-Containing Powder Structural Steels. Composition, Preparation Conditions, and Properties,” Powder Metall. Met. Ceram., 44, No. 3–4, 123–128 (2005).10.1007/s11106-005-0069-3 ↗
5. G. A. Baglyuk, S. G. Napara-Volgina, L. O. Sosnovskii, et al., Methods for Producing Sintered Steels Doped with Manganese [in Ukrainian], Ukrainian Utility Patent No. 200133, Bulletin No. 1, Publ. January 15 (2007).
6. G. A. Baglyuk, L. A. Sosnovskii, V. I. Vol’fman, et al., “Sintered manganese steels produced using copper- bearing ferromanganese master alloy,” Powder Metall. Met. Ceram., 49, No. 9–10, 594–597 (2010).
7. I. M. Fedorchenko, I. G. Slys’, and L. A. Sosnovskii, “Technology of sintering of powder metallurgical materials without a circulating protective atmosphere,” Powder Metall. Met. Ceram., 11, No. 5, 361–366 (1972).10.1007/BF00797738 ↗
8. W. D. Jones, Fundamental Principles of Powder Metallurgy, Edward Arnold Ltd., London (1960).