journal article·2009-11

Mixing enthalpies of liquid alloys and thermodynamic assessment of the Cu–Fe–Ni system

M. A. Turchanin, T. Ya. Velikanova, L. A. Dreval’, A. R. Abdulov, P. G. Agraval

Powder Metallurgy and Metal Ceramics· Volume 48· Issue 11-12
Publisher page

Abstract

The partial mixing enthalpy of nickel in ternary liquid alloys of the Cu–Fe–Ni system is studied by the calorimetric method at 1873 K and xNi = 0–0.55. The $$ \Delta {\overline HNi} $$ function has mainly negative values over the composition range of interest. The results show the key role of binary interactions in the formation energetics of liquid alloys in the Cu–Fe–Ni system. A set of self-consistent parameters of thermodynamic models of the phases is obtained taking into account experimental data on the thermodynamic properties of liquid and solid solutions and data on stable phase transformations. The thermodynamic assessment of the system is carried out in the framework of the CALPHAD method. The calculated liquidus surface and isothermal and vertical sections of the phase diagram are in satisfactory agreement with corresponding experimental data. The metastable miscibility gap of supercooled liquid alloys in the Cu–Fe–Ni system is calculated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical and Alloy Processes · Thermodynamic and Structural Properties of Metals and Alloys · Chemical Thermodynamics and Molecular Structure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. C. Kato, J. E. Castle, B. G. Ateya, and H. W. Pickering, “On the mechanism of corrosion of Cu–9.4Ni–1.7Fe alloy in air saturated aqueous NaCl solution. II. Composition of the protective surface layer,” J. Electrochem. Soc., 127, No. 9, 1897–1903 (1980).10.1149/1.2130032 ↗
2. S. Chadjivasiliou, I. A. Tsoukalas, and H. Papadimitraki-Chlichlia, “On the magnetic properties of the FCC ternary Fe–Cu–Ni alloys,” Z. Metallkd., 77, No. 10, 678–683 (1986).
3. S. Chadjivasiliou, I. A. Tsoukalas, and H. Papadimitraki-Chlichlia, “On the electrical resistivity of Fe–Cu–Ni alloys,” Z. Metallkd., 77, No. 4, 218–222 (1986).
4. I. Navarro, M. E. Ghannami, C. Gomez-Polo, et al., “Mossbauer analysis of phase distribution in Fe–Cu and Fe–Cu–Ni granular melt spun ribbons,” J. Magn. Magn. Mater., 140–141, No. 1, 361–362 (1995).10.1016/0304-8853(94)01229-6 ↗
5. L. C. C. M. Nagamine, A. Biondo, L. G. Pereira, et al., “Effect of interface intermixing on giant magnetoresistance in NiFe/Cu and Co/NiFe/Co/Cu multilayers,” J. Appl. Phys., 94, No. 9, 5881–5890 (2003).10.1063/1.1615704 ↗
6. J. Stolk and A. Manthiram, “Chemical synthesis and properties of nanocrystalline Cu–Fe–Ni alloys,” Mater. Sci. Eng. B, 60, Issue 2, 112–117 (1999).10.1016/S0921-5107(99)00022-7 ↗
7. Y. Zou and E. W. Langer, “A study of the formation and penetration of the molten Copper-Rich phase in Iron with the addition of Nickel and Tin,” Mater. Sci. Eng. A, 110, 203–208 (1989).10.1016/0921-5093(89)90171-8 ↗
8. H. Ohtani, H. Suda, and K. Ishida, “Solid/liquid equilibria in Fe–Cu based ternary systems,” ISIJ Int., 37, No. 3, 207–216 (1997).10.2355/isijinternational.37.207 ↗
9. C. Zhang and M. Enomoto, “Study of the influence of alloying elements on Cu precipitation in steel by non-classical nucleation theory,” Acta Mater., 54, No. 16, 4183 (2006).10.1016/j.actamat.2006.05.006 ↗
10. Y. Y. Chuang, R. Schmid, and Y. A. Chang, “Calculation of the equilibrium phase diagrams and the spinodally decomposed structures of the Fe–Cu–Ni system,” Acta Mater., 33, No. 8, 1369–1380 (1985).10.1016/0001-6160(85)90038-0 ↗
11. V. M. Lopez, N. Sano, T. Sakurai, and K. Hirano, “A study of phase decomposition in Cu–Ni–Fe alloys,” Acta Metall. Mat., 41, No. 1, 265–271 (1993).10.1016/0956-7151(93)90357-X ↗
12. K. J. Ronka, A. A. Kodentsov, P. J. J. Van Loon, et al., “Thermodynamic and kinetic study of diffusion paths in the system Cu–Fe–Ni,” Metall. Mater. Trans. A, 27, No. 8, 2229–2238 (1996).10.1007/BF02651877 ↗
13. U. Ugaste, A. A. Kodentsov, and F. J. J. van Loo, “Interdiffusion and Kirkendall-effect in the Fe–Ni–Cu system,” Sol. St. Phenomena, 72, 117–122 (2000).10.4028/www.scientific.net/SSP.72.117 ↗
14. M. A. Turchanin, P. G. Agraval, and I. V. Nikolaenko, “Thermodynamics of alloys and phase equilibria in the Copper–Iron system,” J. Phase Equilibria, 24, No. 4, 307 (2003).10.1361/105497103770330280 ↗
15. C. Servant, B. Sundman, and O. Lyon, “Thermodynamic assessment of the Cu–Fe–Ni system,” CALPHAD, 25, No. 1, 79–95 (2001).10.1016/S0364-5916(01)00032-3 ↗
16. M. A. Turchanin, P. G. Agraval, and A. R. Abdulov, “Phase equilibria and thermodynamics of binary copper systems with 3d-metals. VI. Copper–nickel system,” Powder Metall. Met. Ceram., 46, No. 9–10, 467–477 (2007).10.1007/s11106-007-0073-x ↗
17. R. Vogel, “Metallographische Mitteilungen aus dem Institut fuer Physikalische Chemie der Universitaet Goettingen. LXXIV. Ueber das Ternary System Iron–Copper–Nickel,” Z. Anorg. Chem., 67, 1–16 (1910).10.1002/zaac.19100670102 ↗
18. W. Köster and W. Dannöehl, “Das system Kupfer–Nickel–Eisen,” Z. Metallkd., 27, 220–226 (1935).
19. A. J. Bradley, W. F. Cox, and H. J. Goldschmidt, “An X-ray study of the Iron–Copper–Nickel equilibrium diagram at various temperatures,” J. Inst. Met., 67, 189–201 (1941).
20. P. Chevenard and E. Josso, “Influence des Additions sur le Diagramme d’equilibre de la transformation order–disorder, dans les ferronickels reversibles,” Compt. Rend. Acad. Sci. Paris, 233, 539–541 (1951).
21. M. P. Ravdel’ and Ya. P. Selisskii, “Transformations in ternary solid solutions based on Ni3Fe,” Dokl. AN SSSR, 15, No. 2, 319–321 (1957).
22. V. I. Goman’kov, I. M. Puzei, and E. I. Mal’tsev, “Effect of alloying elements on Ni3Fe superlattice,” Dokl. AN SSSR, 194, No. 2, 237–240 (1970).
23. M. Hasebe and T. Nishizawa, “Analysis and synthesis of phase diagrams of the Fe–Cr–Ni, Fe–Cu–Mn and Fe–Cu–Ni systems,” in: Applications of Phase Diagrams in Metallurgy and Ceramics, NBS Spec. Publ., 496, No. 2, 911–954 (1978).
24. J. Aalders, C. Van Dijk, and S. Radelaar, “Neutron scattering study on decomposition in Copper–Nickel–Iron alloys,” Phys. Rev. B. Cond. Matter., 30, No. 4, 1646–1655 (1984).10.1103/PhysRevB.30.1646 ↗
25. W. Gan, and Z. Jin, “Miscibility gap in the Fe–Cu–Ni system at 1173 K,” Chin. J. Met. Sci. Technol., 8, No. 3, 181–184 (1992).
26. G. W. Qin, G. Zhao, M. Jiang, et al., “The isothermal sections of the Cu–Ni–Fe ternary system at 600, 800, 1000, and 1050°C,” Z. Metallkd., 91, No. 5, 379–382 (2000).
27. C. Servant, M. Guymont, and O. Lyon, “A new phase in the ternary system Cu–Fe–Ni,” Scr. Mater., 45, No. 1, 103–108 (2001).10.1016/S1359-6462(01)00998-8 ↗
28. I. Gallino, S. Curiotto, M. Baricco, et al., “Homogenization of highly alloyed Cu–Fe–Ni: A phase diagram study,” J. Phase Equilib. Diffus., 29, No. 2, 131–135 (2008).10.1007/s11669-007-9244-1 ↗
29. K. P. Gupta, “The Cu–Fe–Ni (Copper–Iron–Nickel) system,” in: Phase Diagram of Ternary Nickel Alloys, 1, 290–315 (1990).
30. N. Lebrun, P. Perrot, M. Turchanin, and A. Serbruyns, “Copper–Iron–Nickel,” in: Landolt-Boernstein, Numerical Data and Functional Relationships in Science and Technology (New Series), Group IV: Physical Chemistry, W. Martiensen (ed.), Ternary Alloy Systems, Phase Diagrams, Crystallographic and Thermodynamic Data, G. Effenberg and S. Ilyenko (eds.), Springer-Verlag, Heidelberg, Berlin (2008), 11D3, pp. 352–378.
31. J. F. Counsell, E. B. Lees, and P. J. Spencer, “Computer calculation of phase boundaries in the Fe–Cu–Ni and Fe–Cr–Ni systems,” Metal. Chem., 21, 451–458 (1972).
32. J. Velisek, J. Vrestal, and A. Rek, “Thermodynamic activities of the components in the pseudobinary section Ni3Fe–Cu at 1520 K,” Kovove Mater., 15, No. 1, 3–13 (1977).
33. A. Kontopoulos, “Thermodynamics of Cu–Ni–Fe solid solutions,” Trans. Inst. Min. Metall. Sect. C, 87C, C1–C5.
34. V. I. Volkov, N. N. Novikova, and S. E. Vaisburd, “Activity of iron in nickel- and copper-based melts,” Izv. Vuzov. Chern. Metall., No. 4, 127–128 (1984).
35. L. Sh. Tsemekhman, V. P. Mintsis, B. P. Burylev, et al., “Physical and chemical transformation in the Fe–Cu–Ni system,” Izv. Vuzov. Chern. Metall., No. 3, 1–4 (1985).
36. Y. Fujita, R. U. Pagator, M. Hino, and T. Azakami, “Thermodynamic investigation on molten Cu–Ni–Fe alloys by the double Knudsen cell-mass spectrometer system,” J. Jpn. Inst. Met., 61, No. 7, 619–624 (1997).10.2320/jinstmet1952.61.7_619 ↗
37. M. A. Turchanin and I. V. Nikolaenko, “Enthalpies of solution of vanadium and chromium in liquid copper by high temperature calorimetry,” J. All. Comp., 235, 128–132 (1996).10.1016/0925-8388(95)02135-3 ↗
38. A. R. Abdulov, M. A. Turchanin, P. G. Agraval, and A. A. Solorev, “Mixing enthalpy of liquid alloys in the Cu–Ti–Zr system,” Metally, No. 1, 28–34 (2007).
39. A. A. Jansson, Thermodynamic Evaluation of the Cu–Fe–Ni System, Report No. TRITA-MAC 0340, The Royal Institute of Technology, Materials Research Center, Stockholm, 1–10 (1987).
40. C. P. Wang, X. J. Liu, I. Ohnuma, et al., “Thermodynamic database of the phase diagrams in Cu–Fe base ternary systems,” J. Phase Equilib. Diffus., 25, No. 4, 320–328 (2004).10.1007/s11669-004-0150-5 ↗
41. Z. Moser, W. Zakulski, P. Spencer, and K. Hack, “Thermodynamic investigations of solid Copper–Nickel and Iron–Nickel alloys and calculation of the solid state miscibility gap in the Copper–Iron–Nickel system,” CALPHAD, 9, No. 3, 257–269 (1985).10.1016/0364-5916(85)90011-2 ↗
42. P. Spencer, K. Hack, Z. Moser, and W. Zakulski, “Calculation of the fcc/liquid phase equilibria in the Fe–Cu–Ni system,” CALPHAD, 9, No. 2, 191–198 (1985).10.1016/0364-5916(85)90022-7 ↗
43. N. Saunders and A. P. Miodownik, CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, R. W. Cahn (ed.) (Pergamon Materials Series), Pergamon Press, Oxford (1998), Vol. 1, p. 496.
44. A. T. Dinsdale, “SGTE data for pure elements,” CALPHAD, 15, No. 4, 317–425 (1991).10.1016/0364-5916(91)90030-N ↗
45. Y. M. Muggianu, M. Gambino, and J. P. Bros, “Enthalpies of formation of liquid alloys bismuth–gallium–tin at 723 K. Choice of an analytical representation of integral and partial excess functions of mixing,” J. Chimie Phys., 72, No. 1, 83–88 (1975).10.1051/jcp/1975720083 ↗
46. G. Inden, “Determination of chemical and magnetic interchange energies in bcc alloys. III. Application to ferromagnetic alloys,” Z. Metallkd., 68, 529–534 (1977).
47. M. Hillert and M. Jarl, “A model for alloying effects in ferromagnetic metals,” CALPHAD, 2, 227–238 (1978).10.1016/0364-5916(78)90011-1 ↗
48. M. Baricco, E. Bosco, G. Acconciaioco, et al., “Rapid solidification of Cu–Fe–Ni alloys,” Mater. Sci. Eng. A, 375–377, 1019–1023 (2004).10.1016/j.msea.2003.10.037 ↗
49. S. P. Elder, A. Munitz, and G. J. Abbaschian, “Metastable liquid immiscibility in Iron–Copper and Cobalt–Copper alloys,” Mater. Sci. Forum, 50, 137–150 (1989).10.4028/www.scientific.net/MSF.50.137 ↗
50. J. He, J. Z. Zhao, and L. Ratke, “Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu–Fe alloys,” Acta Mater., 54, No. 7, 1749–1757 (2006).10.1016/j.actamat.2005.12.023 ↗
51. G. Wilde, R. Willnecker, R. Nandan Sungh, and F. Sommer, “The metastable miscibility gap in the system Fe–Cu,” Z. Metallkd., 88, No. 10, 804–809 (1997).